BRENNEN

Industries / Government, education and community / Education / Trade schools and vocational training

Shops and labs

Setting up the workshops where students practise a trade on real tools and machines, keeping the equipment current and keeping students safe while they learn.

5

Milestones achieved, from 1868 to 2015.

1

To watch for: announced, not yet confirmed outside.

2

Open deliverables. Nobody has shipped them.

The road

AchievedWatch forOpen

Achieved

  1. 1868

    Teaching shops apart from orders

    In 1868 the council of the Imperial Technical School of Moscow, under its director Victor Della-Vos, separated the school's teaching workshops from the works that filled outside orders. It taught tool work as a graded series of exercises, so that one teacher could supervise many students and check each one's progress at set times. The school showed the method at the 1876 Centennial Exhibition in Philadelphia, where John D. Runkle, president of the Massachusetts Institute of Technology, saw it and had it adopted at MIT the same year.

    archive.org

    Credit

    Victor Della-Vos and the Imperial Technical School of Moscow; John D. Runkle (MIT)

  2. 1880

    Shop work joins general school

    Calvin Woodward's Manual Training School at Washington University in St. Louis opened on 6 September 1880 with about fifty boys, who divided their days between ordinary lessons, drawing and graded shop work; by 1882 it had room for 240. Its stated purpose was to show that manual and mental instruction could be joined in the public schools, and Charles Ham, a supporter of such schools, wrote in 1886 that their aim was "not to make mechanics but men".

    archive.org

    Credit

    Calvin M. Woodward; Washington University in St. Louis; the donors Edwin Harrison, Samuel Cupples and Gottlieb Conzelman

  3. 1978

    Shared shops for small firms

    Many German apprentices train at small firms that lack some of the machines or technology their trade requires. From 1978 the Federal Institute for Vocational Education and Training (BIBB), with money from the federal education ministry, has paid to build and equip inter-company training centers (überbetriebliche Berufsbildungsstätten), most of them run by chambers of crafts, industry or agriculture, where such apprentices take courses on the equipment their firm lacks. In the crafts these courses are compulsory, so most craft apprentices attend them, and later funding rounds added electric vehicle training (€5 million from 2012) and digital technology (from 2016).

    bmbfsfj.bund.debibb.de

    Credit

    BIBB and the German federal education ministry; the chambers that run the centers

  4. 2006

    Two students hurt, one shop

    In 2006 two 10th-grade students in the mill and carpentry shop of a Massachusetts vocational high school were hurt eight days apart, one on a spindle sander and one on a table saw. Both had been signed off on the school's checklist of its 15 machines and had passed a 15-question test, yet both said they had not felt comfortable on the machines. Investigators found that the saw's guard did not meet OSHA's woodworking rule (29 CFR 1910.213), and that the shop ran at 19 students to one teacher on the day of their visit.

    LessonA signed checklist does not show that a student is ready to run a machine alone.

    webarchive.library.unt.edu

    Credit

    Massachusetts FACE Program, Department of Public Health, funded by NIOSH (report released July 2007)

  5. 2015

    Model factories in schools

    After a call for proposals in 2015, Baden-Württemberg's economics ministry paid €6.8 million to set up 15 "Lernfabriken 4.0" (learning factories) at vocational schools: labs built like automated production lines, where metal and electrical apprentices learn how machines, sensors and production software work together. A second round in 2018 added 21 for €4.86 million, and by 2022 there were 43, shared by 74 schools. A study by the Karlsruhe Institute of Technology (KIT) found that teachers were stretched by commissioning and maintaining the equipment and by fitting it into lessons.

    LessonBuying advanced equipment is the easier part; teachers need time to run it and teach with it.

    publikationen.bibliothek.kit.edubaden-wuerttemberg.de

    Credit

    Ministry of Economic Affairs, Labour and Tourism, Baden-Württemberg; Lars Windelband and colleagues (KIT, study)

Watch for

  1. Upgrading 1,000 ITIs

    India's Union Cabinet approved a ₹60,000 crore scheme on 7 May 2025 to upgrade 1,000 government ITIs in a hub-and-spoke arrangement, with revamped trades, money for "capital-intensive, new-age trades" and training for 50,000 trainers; the Asian Development Bank and the World Bank are to co-finance half of the central government's ₹30,000 crore share.

    Achieved whenAn outside party, such as the co-financing banks' project reports or India's national auditor, reports the equipment installed and the new trades taught in upgraded ITIs.

    pmindia.gov.in

    Claimed by

    Government of India, May 2025

Open

  1. 01

    Guard checks for school shops

    A checker that reviews photos of school shop machines (table saws, jointers, band saws, drill presses, lathes, grinders), taken with the machines switched off, against OSHA's guarding rules, and a public test of it against a safety professional's inspection of the same machines.

    The brief
    Credit · unclaimed
  2. 02

    Noise and dust in shops

    An open record of noise and airborne dust in school trade shops during real classes. Low-cost particle and sound sensors, checked against reference instruments, stay in at least 20 woodworking, machining and auto body shops for a term and log every minute, with each reading tied to the timetable and the machines in use.

    The brief
    Credit · unclaimed

Open 01 · the brief

Guard checks for school shops

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A checker that reviews photos of school shop machines (table saws, jointers, band saws, drill presses, lathes, grinders), taken with the machines switched off, against OSHA's guarding rules, and a public test of it against a safety professional's inspection of the same machines.

Why it is still open

In the 2006 Massachusetts case a table saw guard did not meet OSHA's rule although the school kept a sign-off checklist. Vendors sell cameras that watch guards in factories, such as iFactory, which says its system alerts staff "the instant a guard is removed", but they publish no accuracy figures, and searches of GitHub, arXiv and Hugging Face in November 2026 found no labeled set of guard photos and no tested checker.

webarchive.library.unt.eduifactoryapp.com

Built with what exists

Phone photos; a vision-language model such as Gemini or Claude, given the text of 29 CFR 1910.212 and 1910.213 and a checklist for each machine type; a small hand-labeled set for tuning; a certified safety professional or state inspector for the reference inspection.

govinfo.gov

  1. First step

    With one school's permission, photograph its shop machines with the power off and have a safety professional mark each guard as meeting the rule or not.

  2. Done looks like

    200 machines in at least 10 school shops, photographed with the power off; the checker's findings compared item by item with the safety professional's, with the share of real faults found and the share of false alarms published, together with the photo set.

Open 02 · the brief

Noise and dust in shops

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

An open record of noise and airborne dust in school trade shops during real classes. Low-cost particle and sound sensors, checked against reference instruments, stay in at least 20 woodworking, machining and auto body shops for a term and log every minute, with each reading tied to the timetable and the machines in use.

Why it is still open

A 2022 study at three public training institutes in Malaysia measured furniture workshop tasks at 84.2 to 91.1 dB, around the 85 dB level often used as a limit for a working day, and its authors wrote that "not much data has been published regarding noise exposure at TVET institutes". It sampled single tasks in three institutes; no published record covering many schools over a whole term was found.

pmc.ncbi.nlm.nih.gov

Built with what exists

Particle sensors such as the Sensirion SPS30 or Plantower PMS5003 on an ESP32 board or a Raspberry Pi; Class 2 sound level meters or calibrated microphones; a borrowed noise dosimeter and a reference dust sampler for side-by-side checks; Python for cleaning and publishing the data.

  1. First step

    Put one particle sensor and one sound meter in a single school woodshop for two weeks, alongside a borrowed noise dosimeter for one day.

  2. Done looks like

    At least 20 shops in at least two countries, one term each, with minute-by-minute data published, each sensor's error against the reference stated, and the share of class time above 85 dB(A) and above a stated dust level reported for each kind of shop.