Industries / Food, farming and forestry / Food and beverage processing / Sugar refining
Crushing and extraction
Getting the sugary juice out of the plant: cane is cut and torn into fiber by knives and shredders, then squeezed between heavy rollers or washed with hot water in a diffuser; beet is washed, sliced into thin strips called cossettes, and soaked in hot water.
6
Milestones achieved, from 1801 to 2006.
1
To watch for: announced, not yet confirmed outside.
2
Open deliverables. Nobody has shipped them.
The road
AchievedWatch forOpen
Achieved
1801
First beet sugar factory
Andreas Marggraf showed in 1747 that beet holds the same sugar as cane. His student Franz Karl Achard built the world's first beet sugar factory at Cunern in Silesia in 1801, by the account of Südzucker, Europe's largest sugar maker. Juice was made by pressing a mash of ground beet in screw presses, a method Achard set out and most early factories copied, according to the historian Stanislav Rubáš.
Credit
Franz Karl Achard; Andreas Sigismund Marggraf
1850
Cold soaking abandoned
Soaking beet in water, called maceration, promised more sugar than pressing. At the Robert family's factory in Židlochovice, Moravia, Florentin Robert tried Schützenbach's method of drying beet slices and soaking them in cold water. The version used there from 1850 needed so much water and time that the juice spoiled in the open vessels, and the method and its slice dryer were given up. Hot soaking of beet mash, on Mathieu de Dombasle's method, gave juice so full of non-sugars that Robert went back to presses.
Lessonsoaking only beat pressing once the slice shape, water temperature and closed vessels were right, which took another fifteen years.
Credit
Florentin Robert
1865
Soaking instead of squeezing
Julius Robert, Florentin's son, rebuilt the old soaking vessels at Židlochovice into a diffusion battery: closed metal vessels of sliced beet through which warm water passed in turn, drawing sugar out through the cell walls. Presses and the battery ran side by side in the 1864–65 campaign and diffusion alone from 1865–66. The Brno engineering works of Friedrich Wannieck built the first diffusers in 1866, and 27 factories used the method by 1867, by Rubáš's account. Südzucker dates Robert's diffusion method to 1865 and says it made large factories possible.
Credit
Julius Robert; Friedrich Wannieck
1972
Heavy-duty cane shredder
A shredder is a rotor of swinging hammers, spinning fast, that tears chopped cane into fiber so that more juice can be pressed or washed out. In the 1960s J. H. Payne showed that fine preparation mattered for cane diffusion, and Australian engineers developed heavy-duty shredding for mills. The first Tongaat shredder started work at Maidstone mill in South Africa in the 1972/73 season. By 1991 that machine was still in service after nineteen years, and about 80 had been installed in more than 20 countries, by the count of B. St C. Moor of Tongaat-Hulett.
Credit
Tongaat-Hulett's Maidstone mill
1977
Diffuser fed dry cane
A cane diffuser washes a slowly moving bed of shredded cane with hot water, instead of squeezing it through a line of roller mills, called a tandem. In the mid-1970s Maidstone replaced one of its milling tandems with a diffuser built under license from BMA, a German equipment maker, and laid the shredded cane on dry, before any juice was sprayed on. M. S. Greenfield of Tongaat-Hulett says it was, as far as is known, the first rectangular-bed diffuser fed this way, and that dry feeding became standard in BMA and Tongaat-Hulett diffusers.
Lessona diffuser runs without stopping, so the weekly maintenance stop shrank, and the mill had to replace bolted cane knives with a single quick-release pin so that knives and shredder hammers could be changed in four hours.
Credit
Tongaat-Hulett's Maidstone mill; BMA
2006
A diffuser without chains
Bosch Projects, a South African engineering firm, designed and installed a "chainless" moving-screen diffuser for UCL's sugar factory at Dalton, KwaZulu-Natal, in 2006. Between July 2020 and March 2021 it was widened by 1 m as part of raising the factory's crush from 150 to 175 tonnes of cane an hour; Bosch Projects says the widening raised the diffuser's throughput by about 25% and calls it a world first.
Credit
Bosch Projects; UCL Company
Watch for
Taller beet extraction tower
Nordzucker says the new extraction tower at its Schladen factory in Germany, 39 m tall and 12 m across, built for about 10,500 tonnes of beet a day, keeps the cossettes in longer, leaves less sugar in the pulp, needs less water later in the process, and saves up to 22 tonnes of CO2 a day during the campaign compared with the tower it replaced, which was damaged in 2024.
Achieved whenafter the 2026/27 campaign, a party outside Nordzucker, such as the factory's verified emissions report under the EU Emissions Trading System or a technical paper with measured sugar losses in the pulp, confirms the saving.
Claimed by
Nordzucker, August 2026
Open
01
Prepared cane graded from photos
A camera and model that grade shredded cane from a photograph, predicting the laboratory measures of how well it has been prepared: how fast juice drains through it (percolation rate), its packed density, and the Displacement Rate Index, a timed test of how quickly water displaces juice in a sample.
The briefCredit · unclaimed02
Cossette quality from a camera
A bench rig, and later a camera over the cossette conveyor, whose software measures the length, thickness and share of broken pieces ("mush") in beet cossettes, so that slicer knives can be changed when the cut deteriorates rather than on a timetable.
The briefCredit · unclaimed
Open 01 · the brief
Prepared cane graded from photos
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A camera and model that grade shredded cane from a photograph, predicting the laboratory measures of how well it has been prepared: how fast juice drains through it (percolation rate), its packed density, and the Displacement Rate Index, a timed test of how quickly water displaces juice in a sample.
Why it is still open
The Sugar Milling Research Institute in Durban (SMRI) ran a feasibility study in 2019 on 94 photographs of shredded cane, asking whether a machine vision system for cane preparation was worth building; it published no system. A Sugar Research Australia project with Queensland University of Technology (2022/012, ending February 2027) uses cameras over the receiving conveyor to measure leaves, tops and soil (extraneous matter) and billet length in arriving cane, not how finely the cane is shredded.
Built with what exists
A phone or industrial camera with fixed lighting; the percolation, density and Displacement Rate Index tests SMRI used; an open image model such as a ResNet or a Vision Transformer, fine-tuned with PyTorch on one graphics chip (see the Note "One GPU to fine-tune").
First step
Ask SMRI or a mill laboratory for paired photos and test results, and photograph 30 samples that the laboratory has already taken, under the same light, alongside its routine tests.
Done looks like
On 200 held-out samples from at least two mills, predicted percolation rate falls within the repeatability of the laboratory test for at least 80% of samples, and the photos and laboratory values are published.
Open 02 · the brief
Cossette quality from a camera
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A bench rig, and later a camera over the cossette conveyor, whose software measures the length, thickness and share of broken pieces ("mush") in beet cossettes, so that slicer knives can be changed when the cut deteriorates rather than on a timetable.
Why it is still open
Cossettes are cut in a V shape to give a large surface while staying stiff enough not to break up in the extraction tower, so their shape decides how well sugar is extracted. The nearest published camera work in beet processing, the SemanticSugarBeets dataset of 2025, segments damage, rot and soil on whole beets after harvest and storage, not cut strips. Searches of Crossref, Europe PMC, arXiv, GitHub, the web and the site of the slicer and knife maker Putsch found no camera system that grades cossettes.
Built with what exists
An industrial camera and a backlit tray, OpenCV for measuring each strip, and a segmentation model such as Meta's Segment Anything for separating touching pieces.
First step
Photograph 20 laboratory cossette samples on a backlit tray next to the factory's manual measurement.
Done looks like
On 100 samples from one campaign, the camera's average cossette length and mush share agree with the factory laboratory's manual measurement within 5%, and the results and images are published.