BRENNEN

Industries / Food, farming and forestry / Food and beverage processing / Sugar refining

Clarifying and evaporating

Cleaning the raw juice and boiling off most of its water: lime, and for beet also carbon dioxide, makes impurities settle or filter out, and a chain of evaporators turns the thin juice into a thick syrup.

6

Milestones achieved, from 1843 to 2023.

1

To watch for: announced, not yet confirmed outside.

2

Open deliverables. Nobody has shipped them.

The road

AchievedWatch forOpen

Achieved

  1. 1843

    Vapor heats the next vessel

    Cane juice had been boiled down in open kettles over fires. Norbert Rillieux built a multiple-effect evaporator, in which the vapor boiled off one closed vessel heats the next, so the same heat is used several times; he installed it at Judah Benjamin's Bellechasse plantation in Louisiana in 1843 and patented it in 1846. The US National Inventors Hall of Fame, which inducted him in 2004, says it became the basis of all modern industrial evaporation. A history of the Židlochovice factory dates the first Rillieux evaporator in Louisiana to 1840.

    invent.orgjournals.muni.cz

    Credit

    Norbert Rillieux

  2. 1840s

    Upright evaporator bodies

    At Židlochovice, Florentin Robert replaced Rillieux's horizontal evaporator with an upright one. Evaporators of his kind, known as "Roberts", were used in the sugar industry for decades, by Rubáš's account.

    journals.muni.cz

    Credit

    Florentin Robert

  3. 1860s

    Lime and carbon dioxide

    In carbonatation, lime is stirred into raw beet juice, then carbon dioxide gas is bubbled through it; the lime turns to chalk (calcium carbonate) particles that carry impurities out when the juice is filtered. Scientific American reported in May 1869 that some European beet sugar makers had adopted the Périer-Possoz process of double liming and double carbonatation, and described a simpler one-step process by Jelinek. It said the extra lime would be paid for by needing less bone black, the charred bone used to filter color out of juice.

    scientificamerican.comen.wikipedia.org

    Credit

    Périer and Possoz; Jelinek

  4. 1974

    Louvers guard evaporator screens

    Droplets of juice carried off with the vapor lose sugar, and wire-mesh screens called demisters are fitted to catch them. At Maidstone mill in South Africa the demisters fouled so fast that they were pulled out monthly, boiled in caustic soda and sometimes pounded with wooden poles. Watching through the vessels' sight glasses, engineers concluded that big splashes, not fine droplets, were the cause, and in 1974 fitted rows of angled steel louvers below the screens. By 1991 the demisters needed cleaning once a season, and another mill had used the design for its own separator.

    Lessonthe screens failed against splashing they were never built to stop, which only watching the vessels in operation showed.

    sasta.co.za

    Credit

    Tongaat-Hulett's Maidstone mill, reported by B. St C. Moor

  5. 2000s

    Heat replaces biocides

    Microbes growing in extracted cane juice eat sucrose. The US Department of Agriculture's Agricultural Research Service (ARS) tested three commercial biocides, bleach, sodium carbamate and hops, alone and together at two Louisiana factories, and found none effective. Heating the juice during clarification removed the contamination; ARS says numerous US factories replaced biocides with its heat treatment, saving each about US$47,000 a year and the Louisiana industry about US$515,000.

    Lessonthe biocides factories were buying had not been shown to work in a factory until ARS tested them there.

    scientificdiscoveries.ars.usda.gov

    Credit

    USDA Agricultural Research Service

  6. 2023

    Electric vapor compression at Chelsea

    The New Zealand Sugar Company's refinery at Chelsea, Auckland, replaced its steam-driven thermal vapor recompression evaporator with an Alfa Laval evaporator using mechanical vapor recompression (MVR), in which an electric compressor raises the vapor's pressure so it can heat the same evaporator again. Supermarket News reported it fully running in May 2023; it was co-funded by New Zealand's Government Investment in Decarbonisation (GIDI) Fund after a 2020 study with the government's Energy Efficiency and Conservation Authority (EECA). Alfa Laval gives about 36 Wh per kg for the new system against about 190 Wh per kg for the old, and elsewhere a 9% cut in plant energy use and 11% in emissions, 2,767 tonnes of CO2 a year; these are the supplier's figures.

    supermarketnews.co.nzeeca.govt.nzalfalaval.comalfalaval.com

    Credit

    New Zealand Sugar Company (Wilmar); Alfa Laval; EECA

Watch for

  1. Electric vapor compressor in Italy

    Turboden says it will supply a centrifugal mechanical vapor recompressor to Co.Pro.B.–Italia Zuccheri for a sugar factory whose evaporators now take steam from a gas-fired boiler. It is to compress 22 tonnes an hour of vapor from 0.38 bar and 80 °C to 1.8 bar and 117 °C (absolute pressures), and "notably reduce" gas use; no saving is quantified.

    Achieved whenthe unit runs through a full beet campaign and a party outside Turboden and the factory, such as the factory's verified emissions report or a trade-press visit with measured figures, reports the gas saved.

    turbomachinerymag.com

    Claimed by

    Turboden, April 2026

Open

  1. 01

    Settling tests read from video

    Software that reads a time-lapse video of a juice settling test, in which limed juice and a flocculant (a chemical that clumps fine particles) settle in a glass cylinder while a technician notes the height of the mud line every minute, and returns the settling curve, the settling rate and the final mud volume, so that flocculant doses can be compared on more tests than a technician can watch.

    The brief
    Credit · unclaimed
  2. 02

    Free factory balances, checked

    A public set of measured evaporator-station figures from published mill and factory trials (juice flow, brix in and out of each effect, pressures, steam use), a scorecard of how closely the free sugar-factory balance programs reproduce them, and a module for mechanical vapor recompression, which beet factories and refineries are now installing.

    The brief
    Credit · unclaimed

Open 01 · the brief

Settling tests read from video

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

Software that reads a time-lapse video of a juice settling test, in which limed juice and a flocculant (a chemical that clumps fine particles) settle in a glass cylinder while a technician notes the height of the mud line every minute, and returns the settling curve, the settling rate and the final mud volume, so that flocculant doses can be compared on more tests than a technician can watch.

Why it is still open

Cameras already read settling tests in mining: Mudline, from Australia's CSIRO with Rio Tinto, was reported in 2001 to locate the settling line in mineral slurries in real time, and a GitHub project (ysboss/imageProcessing) finds the sediment-water line in photos of settling columns. A 2019 study modeled cane juice clarification from plant data because purity and color are measured offline in the laboratory. No tool that reads cane or beet juice settling tests from video, checked against a technician's readings, was found.

wateronline.comgithub.compmc.ncbi.nlm.nih.gov

Built with what exists

A phone on a tripod with a lit white background; OpenCV and Python to find the mud line in each frame; optionally a segmentation model such as Meta's Segment Anything for murky interfaces.

  1. First step

    Film ten settling tests in a mill or university laboratory alongside the usual manual readings.

  2. Done looks like

    On 50 recorded juice settling tests, the software's mud-line height is within 2 mm of a person's reading at 90% of time points and the settling rate within 5%, with code and videos published.

Open 02 · the brief

Free factory balances, checked

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A public set of measured evaporator-station figures from published mill and factory trials (juice flow, brix in and out of each effect, pressures, steam use), a scorecard of how closely the free sugar-factory balance programs reproduce them, and a module for mechanical vapor recompression, which beet factories and refineries are now installing.

Why it is still open

Free programs now exist. Cody Eaves, a sugar mill engineer, published an MIT-licensed Python program in 2026 for the material and energy balance of a raw cane factory, with evaporator sets and steam-jet thermocompressors, and its README says to calibrate it against plant data before trusting any single number. S.Pr.E.M.E., a 2026 teaching tool from the University of São Paulo, sizes evaporators of up to five effects. Neither publishes a comparison with measured factory data or lists electric vapor recompression among its parts. The established Sugars simulator, sold since 1986, is licensed software.

github.comgithub.comsugarsonline.com

Built with what exists

The two open programs; Python with the CoolProp or IAPWS-97 steam tables; published boiling-point-rise correlations for sugar solutions; station surveys published in sugar technologists' proceedings, such as those of the South African Sugar Technologists' Association.

  1. First step

    Run the worked examples in Eaves's repository, then transcribe one measured evaporator survey from a published mill paper and compare.

  2. Done looks like

    At least 15 published station surveys transcribed with their sources, each program's predicted steam use compared with the measured figure and the errors published, and a vapor recompression module that reproduces, within 5%, the compressor duty implied by Turboden's stated conditions for Co.Pro.B. (22 t/h from 0.38 to 1.8 bar absolute).

    turbomachinerymag.com