BRENNEN

Industries / Mining and materials / Steel and metals

Steelmaking

Steelmaking turns molten iron, sponge iron and scrap into steel by burning off excess carbon and impurities and then adjusting the chemistry.

5

Milestones achieved, from 1856 to 1969.

1

To watch for: announced, not yet confirmed outside.

1

Open deliverables. Nobody has shipped them.

The road

AchievedWatch forOpen

Achieved

  1. 1856

    Air blown through iron

    Henry Bessemer told the British Association at Cheltenham that blowing air through molten pig iron, the high-carbon iron from a blast furnace, could make iron and steel without fuel. Early metal failed: phosphorus in ordinary pig iron stopped it making good malleable iron, and Robert Mushet saved over-oxidized "burnt" metal by remelting it with spiegeleisen, a manganese-rich iron. When makers turned the process down, Bessemer opened his own works in Sheffield in 1858.

    Lessona process proven on one iron can fail on another, because the chemistry of what goes in decides what comes out.

    gracesguide.co.uk

    Credit

    Henry Bessemer; Robert Mushet

  2. 1878

    Phosphorus removed in converter

    Sidney Gilchrist Thomas and his cousin Percy Gilchrist, a chemist at an ironworks in Blaenavon, Wales, announced in 1878 that they had removed phosphorus from iron in a Bessemer converter. Edward Windsor Richards took the method up at Bolckow, Vaughan and Co in Middlesbrough. Now called the basic process, it was most valuable in continental Europe, where phosphoric iron was common, and its slag was sold as phosphate fertiliser.

    mpiuk.com

    Credit

    Sidney Gilchrist Thomas; Percy Gilchrist

  3. 1900

    Electric arc furnace

    Paul Héroult made the first industrial use of the electric arc for steel at La Praz, France, on 9 October 1900. An arc furnace melts its charge with electric current jumping from carbon electrodes. By 1939 it was still kept for quality and special steels.

    techniques-ingenieur.fr

    Credit

    Paul Héroult

  4. 1952

    Pure oxygen converter

    VÖEST tapped the first 30 tonnes of steel from a converter blown with pure oxygen at Linz, Austria, on 27 November 1952. A second plant started at Donawitz on 22 May 1953, which gave the process its name, LD. Primetals dates the Linz start-up to 26 November 1952. Worldsteel reports that 69.4% of the world's crude steel came from oxygen converters in 2025.

    voestalpine.comprimetals.com

    Credit

    VÖEST

  5. 1969

    Scrap-based mini mill

    Nucor's first mini mill, at Darlington, South Carolina, went into production in 1969. A mini mill melts scrap in an electric arc furnace and casts and rolls it on one small site, instead of starting from ore. Electric furnaces made 30.3% of the world's crude steel in 2025, by worldsteel's figures.

    nucor.comworldsteel.org

    Credit

    Nucor

Watch for

  1. Steel by electrolysis

    Boston Metal says it has commissioned an industrial-scale molten oxide electrolysis cell in Woburn, Massachusetts. Molten oxide electrolysis makes liquid metal from iron ore with electricity instead of coal. Its chief executive said "tonnage steel is flowing" from the cell; no quantity or outside measurement was given.

    Achieved whenan independent party reports a measured tonnage of steel made this way, or a customer confirms receiving it.

    bostonmetal.com

    Claimed by

    Boston Metal, March 2025

Open

  1. 01

    Open arc furnace heat records

    A public, anonymized record of several thousand electric arc furnace heats (one heat is one furnace load from charge to tap). Each record holds the charge by scrap grade and weight, electricity and oxygen used, tap temperature, final chemistry and time, plus a baseline model that predicts electricity per tonne.

    The brief
    Credit · unclaimed

Open 01 · the brief

Open arc furnace heat records

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A public, anonymized record of several thousand electric arc furnace heats (one heat is one furnace load from charge to tap). Each record holds the charge by scrap grade and weight, electricity and oxygen used, tap temperature, final chemistry and time, plus a baseline model that predicts electricity per tonne.

Why it is still open

A 2024 survey of AI work in the steel industry found no paper that made its data public as an appendix, and named the confidentiality of company data as the likely reason. It found only three public datasets dedicated to steel production.

arxiv.org

Built with what exists

Records from a partner mill; standard anonymization; Python with pandas and scikit-learn for the baseline; Zenodo for open hosting.

  1. First step

    Write a one-page anonymization plan and a data-sharing agreement, and send them to five electric-furnace operators and two university steel research centres.

  2. Done looks like

    At least 5,000 heats from at least one mill under an open licence, a field-by-field description, and a baseline error in kilowatt-hours per tonne on a held-out set of heats.