BRENNEN

Industries / Mining and materials / Steel and metals

Casting and rolling

Casting and rolling turn liquid steel into solid slabs, billets or strip, then press it between rolls, hot or cold, into plate, sheet, bar and wire.

5

Milestones achieved, from 1783 to 2009.

1

To watch for: announced, not yet confirmed outside.

1

Open deliverables. Nobody has shipped them.

The road

AchievedWatch forOpen

Achieved

  1. 1783

    Grooved rolls and puddling

    Henry Cort patented steam-powered grooved rolls in 1783 and a puddling furnace in 1784. In puddling, molten pig iron is stirred to remove impurities; the ball of iron is then hammered and rolled into bars. Cort built on Peter Onions' puddling process.

    gracesguide.co.uk

    Credit

    Henry Cort

  2. 1949

    Continuous casting of steel

    In continuous casting, molten metal is poured into a cooled mould with no bottom and a solid strand is drawn out without stopping, instead of filling one ingot at a time. In May 1949 Irving Rossi carried the method over from non-ferrous metals to steel, and in 1954 he founded Concast in Zurich to sell the machines. Continuously cast steel was 59.15% of world output in 1990, by the same account, and 97.4% in 2025, by worldsteel's.

    aist.orgworldsteel.org

    Credit

    Irving Rossi

  3. 1989

    Thin slab casting

    Nucor's mini mill at Crawfordsville, Indiana, was the first in the world to make quality flat-rolled steel from thin cast slabs, by Nucor's account. Nucor's timeline files the entry under 1992 but says that by 1992 the plant had three years of production, which puts the start in 1989.

    nucor.com

    Credit

    Nucor

  4. 2002

    Strip cast from liquid

    The Castrip plant at Nucor's Crawfordsville mill started up in May 2002. It casts steel directly into thin strip between two rolls, and made sheet down to 0.84 mm thick. Nucor's own history says the technology "never achieved commercial viability."

    Lessona process can work at full plant scale and still not pay.

    aist.orgnucor.com

    Credit

    Nucor, BlueScope Steel and IHI

  5. 2009

    Endless casting and rolling

    Acciaieria Arvedi's ESP line at Cremona, Italy, began endless operation in summer 2009, making hot-rolled coil straight from liquid steel in one unbroken line, down to 0.8 mm thick. Online measurements at the plant, reported by the Association for Iron & Steel Technology, showed 45% less energy than conventional casting and rolling.

    aist.org

    Credit

    Acciaieria Arvedi

Watch for

  1. A faster endless line

    Primetals says the Arvedi ESP line at Zhongshou Special Steel in Hebei, China, made its first coil on 13 May 2026, five days after its first cast. It calls the line the most powerful and productive Arvedi ESP line to date, and says it is designed for strip from 0.7 to 12.7 mm thick.

    Achieved whenthe mill or an outside party publishes production figures that show the claimed output, with 0.7 mm coil in regular production.

    primetals.com

    Claimed by

    Primetals Technologies, May 2026

Open

  1. 01

    Open breakout warning benchmark

    A public set of mould temperature records from continuous casters, labelled with sticker breakouts and false alarms, and a scoring rule. A breakout happens when the thin solid shell of a strand tears below the mould and liquid steel runs out; thermocouples in the mould walls are watched for the warning pattern.

    The brief
    Credit · unclaimed

Open 01 · the brief

Open breakout warning benchmark

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A public set of mould temperature records from continuous casters, labelled with sticker breakouts and false alarms, and a scoring rule. A breakout happens when the thin solid shell of a strand tears below the mould and liquid steel runs out; thermocouples in the mould walls are watched for the warning pattern.

Why it is still open

Published breakout predictors are built and tested on one plant's private records. A 2022 paper tested at Bokaro Steel Plant in India, with 13 breakouts in its field trial, and its data statement reads "No data were used to support this study."

pmc.ncbi.nlm.nih.gov

Built with what exists

Anonymized thermocouple logs from partner casters; Python time-series tools; Zenodo for hosting.

  1. First step

    Write to the authors of five published breakout papers and ask whether they can release anonymized records under a shared licence.

  2. Done looks like

    At least 50 labelled breakouts or near-breakouts and at least 1,000 hours of normal casting from at least two casters, public, with a baseline detection rate and false alarms per 1,000 heats.