BRENNEN

Industries / Mining and materials / Steel and metals

Recycling scrap

Recycling scrap collects, sorts and prepares used and offcut metal so furnaces can melt it again.

4

Milestones achieved, from 1958 to 2024.

1

To watch for: announced, not yet confirmed outside.

2

Open deliverables. Nobody has shipped them.

The road

AchievedWatch forOpen

Achieved

  1. 1958

    The car shredder

    Proler Steel of Houston opened its first shredding plant in 1958, after many steelmakers refused car scrap for its high copper content. The shredder, designed by Israel Proler and his brother Sam, tore cars into fist-sized pieces about 90% steel, which sold for $8 to $10 a ton more than bundled car scrap.

    Lessonthe shredder was built to answer mills' complaints about copper, and copper in scrap is still an unsolved problem.

    inventionandtech.com

    Credit

    Israel and Sam Proler, Proler Steel

  2. 2017

    Copper limit forecast

    Researchers at the University of Cambridge projected that by 2050 the copper in steel scrap would likely exceed what the steel products in demand can tolerate. Copper causes cracking in steel, and there is no commercial process to remove it, so it has to be kept out before melting.

    eng.cam.ac.uk

    Credit

    Katrin Daehn, André Cabrera Serrenho and Julian Allwood, University of Cambridge

  3. 2019

    Recycling energy measured

    The International Aluminium Institute put the energy to make primary aluminum, from mine to cast house, at 186 gigajoules per tonne in 2019, against 8.3 GJ per tonne for aluminum made from scrap, a saving of 95.5%. The scrap figure averages regional studies from Europe and North America, because no global estimate exists.

    international-aluminium.org

    Credit

    International Aluminium Institute

  4. 2024

    Robots pick copper from shred

    A large US metals recycler, not named, ordered three ZenRobotics Heavy Pickers in May 2024 to separate copper from its shredded steel. The robots use cameras to find copper-bearing pieces on a moving belt and lift them off with a gripper arm.

    recyclingproductnews.com

    Credit

    ZenRobotics

Watch for

  1. Camera grading of scrap

    JFE Steel says its AI system, Resolas, grades scrap and finds foreign material from images of truck deliveries. It ran trials from April 2026 at the Sendai Works electric furnace plant and went into commercial use there in June, and JFE now sells it to scrap processors. JFE reports "high inspection accuracy" but gives no figure.

    Achieved whenJFE or an outside buyer publishes grading accuracy measured against inspectors or weighed loads.

    bigmint.co

    Claimed by

    JFE Steel, June 2026

Open

  1. 01

    Scrap photos checked by weighing

    A public set of photographs of scrap loads in which each load is then sorted by hand and weighed, so its share of non-metal and copper-bearing pieces is measured rather than guessed, plus a baseline model that estimates those shares from the photos.

    The brief
    Credit · unclaimed
  2. 02

    Independent test of cleaned shred

    A sampling and test protocol that measures copper in shredded steel before and after robotic picking, run at a working recycler, with the results published.

    The brief
    Credit · unclaimed

Open 01 · the brief

Scrap photos checked by weighing

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A public set of photographs of scrap loads in which each load is then sorted by hand and weighed, so its share of non-metal and copper-bearing pieces is measured rather than guessed, plus a baseline model that estimates those shares from the photos.

Why it is still open

A February 2026 paper deploys an image model at one recycler, but its labels are the average of three inspectors' visual estimates, which the authors call "a noisy proxy" of true contamination. It used no lab analysis and did not release its data.

arxiv.org

Built with what exists

Fixed or phone cameras; a platform scale; hand sorting on a table with gloves and eye protection, with yard staff moving the bins; current open image models for the baseline; Hugging Face or Zenodo for hosting.

  1. First step

    Agree with a local scrap yard to photograph, sort and weigh 10 bins, and publish the method.

  2. Done looks like

    At least 200 bins of shredded steel, each with at least five photos and weighed fractions, published under an open licence, with the baseline's error in percentage points.

Open 02 · the brief

Independent test of cleaned shred

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A sampling and test protocol that measures copper in shredded steel before and after robotic picking, run at a working recycler, with the results published.

Why it is still open

The figure of less than 0.1% copper after robotic picking comes from the robot maker's own testing, quoted by its sales director.

recyclingproductnews.com

Built with what exists

A written sampling plan; hand sorting and weighing of copper-bearing pieces; chemical analysis of melted samples by an accredited laboratory, so the team handles no molten metal.

  1. First step

    Draft the sampling plan and ask one recycler that runs sorting robots for access.

  2. Done looks like

    At least 20 paired samples, before and after picking, with copper in percent by weight and confidence intervals, and the protocol published so others can repeat it.