BRENNEN

Industries / Energy, water and waste / Environmental services / Solid waste collection

Transfer stations

Transfer stations are buildings where collection trucks tip their loads onto a floor or into a pit, so the waste can be packed into bigger trailers, containers, railcars or barges for the long trip to a landfill or incinerator.

6

Milestones achieved, from 1960s to 2018.

1

To watch for: announced, not yet confirmed outside.

2

Open deliverables. Nobody has shipped them.

The road

AchievedWatch forOpen

Achieved

  1. 1960s

    Trucks stop at town's edge

    Seattle built its two transfer stations in the 1960s, when landfill space inside the city ran out and its waste began going to the Kent Highlands and Midway landfills outside city limits. Collection trucks could not drive that far efficiently, so the stations packed many small loads into larger ones for the trip.

    seattle.gov

    Credit

    City of Seattle

  2. 1987

    A barge nobody would take

    On 22 March 1987 a tug began towing the barge Mobro 4000, loaded in Queens, New York, with 3,168 tons of trash, toward North Carolina. North Carolina, Louisiana, Florida, Mexico and Belize turned it away, and after about 6,000 miles it was back off Brooklyn on 18 May. Burning of the trash in a Brooklyn incinerator began on 1 September 1987, with the ash to go to the landfill in Islip, Long Island.

    LessonA long haul only works if someone at the far end agrees to take the load; afterwards Islip agreed to raise its recycling rate to 50% from about 15%, according to an EBSCO reference account.

    ebsco.com

    Credit

    Lowell Harrelson, an Alabama building contractor, who arranged the shipment through his company, National Waste Contractors

  3. 1990

    Garbage goes by train

    Columbia Ridge Landfill in Arlington, Oregon, opened in 1990, and Seattle has had a contract with Waste Management to haul its garbage there by rail since the landfill opened. Seattle packs its garbage into sealed 40-foot intermodal containers, shipping boxes that move between truck and train, and trains leave its Argo Rail Yard six times a week with containers stacked two high.

    seattle.govwmsolutions.com

    Credit

    Seattle Public Utilities; Waste Management; Union Pacific Railroad, which runs the Argo yard

  4. 2001

    Export replaces Fresh Kills

    Fresh Kills Landfill on Staten Island took its last barge of New York City garbage on 22 March 2001, under a 1996 state law. The city's 2006 Solid Waste Management Plan put marine transfer stations, waterside stations that load sealed containers onto barges, at the center of a new export system meant to spread the work fairly across the five boroughs. Four such stations have been completed since 2006 (North Shore, Hamilton Avenue, Southwest Brooklyn and East 91st Street), and the city's 2026 draft plan says about 60% of the waste brought to city transfer stations leaves through the Port Liberty container terminal on Staten Island and 40% through a rail terminal in Elizabeth, New Jersey, all of it ending its trip by rail.

    nycgovparks.orgnyc.govnyc.gov

    Credit

    New York City Department of Sanitation (DSNY); its export contractors Reworld (formerly Covanta) and WM

  5. 2002

    When a transfer station pays

    A US EPA manual set out the arithmetic of transfer. In its example a collection truck carries 7 tons and a transfer trailer 21 tons, so moving waste through a station becomes cheaper once the round trip to the landfill passes about 35 miles. It adds that one train can take more than 200 truck trips off the highway and one barge can replace 350.

    LessonThe manual followed fact-finding sessions in New York City and Washington, DC, in 1998 and 1999, held after citizens complained that transfer stations were placed disproportionately in low-income communities and communities of color.

    epa.gov

    Credit

    US EPA Office of Solid Waste, with a Solid Waste Association of North America focus group and a working group of EPA's National Environmental Justice Advisory Council

  6. 2018

    Capacity cut where stations cluster

    Most of New York City's private transfer stations, and most of their permitted capacity, sat in four community districts. Local Law 152 of 2018 cut the permitted capacity of those stations by 50% in Brooklyn Community District 1 and by 33% in Queens Community District 12 and Bronx Community Districts 1 and 2.

    nyc.gov

    Credit

    New York City Council; DSNY

Watch for

  1. More waste moves by rail

    Waste Connections says it has grown the rail network that feeds its Arrowhead landfill in Alabama "by effectively 300%" in two years, and Waste Dive reports that the landfill takes 95% of its waste by rail. The pressure behind it is in the Northeast: the Northeast Waste Management Officials' Association counts 12 million tons, 26% of the waste its eight member states disposed of in 2024, shipped out of the region by truck or rail.

    Achieved whentonnage reported to Alabama's environment regulator, or another outside count, shows rail-delivered waste at Arrowhead roughly tripling over those two years.

    wastedive.comnewmoa.org

    Claimed by

    Ron Mittelstaedt, chief executive of Waste Connections, September 2026

Open

  1. 01

    Who lives near transfer stations

    A public table and map of every permitted municipal waste transfer station in five US states, giving its owner, permitted tons per day, rail or barge access, and the income and race profile of the census tract around it, with each row linked to the state permit record.

    The brief
    Credit · unclaimed
  2. 02

    Truck, rail or barge

    An open calculator for moving a ton of waste from a transfer station to a landfill by truck, rail or barge, giving cost and diesel per ton, built on EPA's break-even formula and checked against real long-haul contracts.

    The brief
    Credit · unclaimed

Open 01 · the brief

Who lives near transfer stations

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A public table and map of every permitted municipal waste transfer station in five US states, giving its owner, permitted tons per day, rail or barge access, and the income and race profile of the census tract around it, with each row linked to the state permit record.

Why it is still open

EPA's 2002 manual records complaints that stations cluster in low-income communities and communities of color, and New York City had to cut already-permitted capacity by law in 2018 after counting its own. EPA made one national count, now archived: with 2000 Census data and sites as they stood in about 2008, it found people within 1 mile of a transfer station were 47% minority and 18% below the poverty line, against 42% and 15% within 3 miles, and it gave no station sizes. EPA's Disaster Debris Recovery Tool maps more than 20,000 recyclers and landfills, updated August 2026, but its page lists no capacity field. A 2022 dataset by Leel Dias, Mike Ewall and Vanessa Levy gathered state tonnage records through public-records requests to all 50 states, for non-commercial use, without permitted capacity or neighborhood data. A GitHub search for transfer-station siting tools found nothing.

archive.epa.govepa.govdata.mendeley.comepa.gov

Built with what exists

State permit lists; the downloadable data behind EPA's Disaster Debris Recovery Tool; US Census American Community Survey tables through the Census API; Python with GeoPandas, and QGIS; a low-cost extraction model to pull fields from permit PDFs (see the Note "The jobs agents repeat"); an agent that cites the record behind each row (see the Note "Findings that cite notes").

  1. First step

    Download New Jersey's and New York's permit lists, build 50 rows by hand, and write down the field definitions.

  2. Done looks like

    Every permitted transfer station in five states is in the table, each row linked to its permit record. A second person rechecks a random 10% of rows and agrees on at least 95% of fields. A one-page summary gives the share of each state's permitted capacity that sits in tracts above the state's median poverty rate.

Open 02 · the brief

Truck, rail or barge

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

An open calculator for moving a ton of waste from a transfer station to a landfill by truck, rail or barge, giving cost and diesel per ton, built on EPA's break-even formula and checked against real long-haul contracts.

Why it is still open

EPA's published formula uses 2002 figures (US$3 a mile, 7-ton and 21-ton loads, US$10 a ton to run the station) and covers trucks only. SwolfPy, an open-source model of whole waste systems from North Carolina State University, does count haul by heavy truck, rail and barge, but as one part of a life-cycle model run on default costs; no check of it, or of any similar model, against real haul prices was found. Operators disagree in public: Casella's chief executive says rail can cost up to eight times more than trucking, while Win Waste Innovations says rail is four times more fuel efficient than trucks on a highway.

epa.govswolfpy.readthedocs.iogithub.comwastedive.com

Built with what exists

EPA's 2002 formula; SwolfPy's transport and transfer-station models as a cross-check; US Energy Information Administration diesel price series; published rail and barge fuel figures; a spreadsheet or Python notebook; public long-haul contracts, such as Seattle's rail-haul contract, which its utility lists on its contracts page.

  1. First step

    Find three public long-haul contracts that state a price per ton, starting with Seattle's, and enter the 2002 EPA example to confirm the formula gives the manual's 35-mile break-even.

  2. Done looks like

    The calculator reproduces the per-ton haul price of three published contracts, at least one by rail, within 20%, with every input cited. It ships with its code and a worked example for a route of 100, 300 and 600 miles.