Industries / Energy, water and waste / Electric transmission and distribution / Smart metering
Communications
Communications is how a reading gets from the meter to the utility: by a radio picked up as someone walks or drives past, by signals sent along the power wires, or by fixed radio and mobile phone networks.
7
Milestones achieved, from 1986 to 2026.
2
To watch for: announced, not yet confirmed outside.
1
Open deliverables. Nobody has shipped them.
The road
AchievedWatch forOpen
Achieved
1986
Radio reads gas meters
Itron shipped its first ERT (encoder receiver transmitter) module, a small radio fitted to a gas meter, from its plant in Waseca, Minnesota, so a reader could collect figures without seeing the dial. Itron shipped its 30 millionth gas module in 2010, to Atlanta Gas Light.
Credit
Itron
1986
Readings over power wires
TWACS sends data both ways over a utility's own distribution wires, so no radio network is needed; its first large sale was to Florida Power & Light in 1986. By November 2003 PPL Electric Utilities had over a million meters live on it, at a time when 86% of US meters were still read by hand.
Credit
Distribution Control Systems Inc. (DCSI), now part of Aclara
1997
A shared meter language
Utilities and makers formed the DLMS User Association to publish an open data model, DLMS/COSEM, so that a meter from any maker can be read the same way over any link. Itron, one of three founders, reports more than 300 members and over 1,200 certified device types.
Credit
DLMS User Association
2012
Power-line standards published
In October 2012 the ITU, the UN's telecommunications standards body, published two rival standards for sending meter data over low-voltage power lines: G.9903 for G3-PLC and G.9904 for PRIME, which came out of the Spanish utility Iberdrola's rollout. The PRIME Alliance reports over 20 million PRIME meters in over 20 countries.
Credit
ITU-T Study Group 15; PRIME Alliance; G3-PLC Alliance; Iberdrola
2016
Britain's shared meter network
The Data Communications Company (DCC) switched on Britain's single national meter network in November 2016, so that every supplier could install second-generation SMETS2 meters on it. The north is covered by long-range radio from Arqiva and the centre and south by 2G/3G mobile and mesh radio from Virgin Media O2. By May 2026 over one million homes had been moved to 4G hubs ahead of the 2G and 3G shutdown.
Credit
Smart DCC; Arqiva; Virgin Media O2
2026
Britain retires a radio signal
The Radio Teleswitch Service, a 1980s long-wave signal that switched older meters, heating and hot water between peak and off-peak rates, was due to end on 30 June 2025, but suppliers called off a single switch-off because over 600,000 such meters were still in use. Ofgem reported fewer than 154,000 left in January 2026, and STV reported the last meters in Scotland switched off by 30 June 2026.
LessonOfgem found industry records of which homes still relied on the signal "incomplete or in some cases inaccurate," so the end of a borrowed link needs years of planning.
Credit
Ofgem; UK energy department; energy suppliers
2026
Meter mesh radio becomes ISO standard
Wi-SUN FAN, a mesh radio network in which each meter relays its neighbours' messages, was published as IEEE/ISO/IEC 32857-2026 on 9 April 2026. The Wi-SUN Alliance says it is the first wireless mesh standard adopted by ISO and IEC.
Credit
Wi-SUN Alliance; IEEE; ISO; IEC
Watch for
Meters over home broadband
The DCC plans a "Virtual WAN" service in 2026 to connect smart meters in about 328,000 British homes with no radio or mobile coverage through the home's broadband line.
Achieved whenthe DCC reports customer meters sending readings over broadband in routine service.
Claimed by
Smart DCC, reported October 2025
Water meters read by satellite
Zenner USA, EchoStar Mobile and Semtech showed what they call the world's first water meter that sends LoRaWAN radio messages straight to a satellite, for sites with no ground network, and call it production-ready.
Achieved whena named utility reports a paid deployment and its read rate.
Claimed by
Zenner USA, EchoStar Mobile and Semtech, July 2025
Open
01
Measure meter radio range
A public, repeatable test of how often Wireless M-Bus meter messages (the 868 MHz radio format used by many European water, heat and gas meters) are received at each distance and through each kind of wall, for several common receivers.
The briefCredit · unclaimed
Open 01 · the brief
Measure meter radio range
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A public, repeatable test of how often Wireless M-Bus meter messages (the 868 MHz radio format used by many European water, heat and gas meters) are received at each distance and through each kind of wall, for several common receivers.
Why it is still open
The main open-source decoder, wmbusmeters, ranks receivers after what its own wiki calls "personal, subjective and very rudimentary testing," with single readings at 30 m and 15 m; no published table of receive rate against distance was found.
Built with what exists
Meters the team owns; an RTL-SDR software radio running rtl-wmbus, and two USB receiver dongles; wmbusmeters; a laser rangefinder; Python. Receive only, on the licence-exempt band, and only the team's own meters.
First step
Buy two meters, record 1,000 messages at 1 m from each receiver, and publish the baseline.
Done looks like
Receive rates from 1,000 or more messages per point at five or more distances in three settings (open air, one interior wall, through a floor), published as raw recordings and a table, and reproduced within 10 percentage points by a second team.