Industries / Energy, water and waste / Electric transmission and distribution
Smart metering
Smart metering is the business of fitting electricity, gas and water meters that record use and send it to the utility on their own, and of the networks, data systems and billing that turn those readings into bills, prices, outage maps and leak and theft alerts.
1965
Transitel International reported a sixteen-month test of its Automatic Meter Reading System, which read household utility meters over telephone lines in Owosso, Michigan, and found it "technically feasible" and compatible with telephone company equipment (Brothman, Reiser, Kahn, Rittenhouse and Wells, IEEE Transactions on Communication Technology, 1965).
28
Milestones achieved across 4 domains.
7
To watch for: announced, not yet confirmed outside.
6
Open deliverables. Nobody has shipped them.
In one minute
Where it started
For most of the 20th century a meter reader walked to every meter and wrote down the dial. In the 1960s and 1970s engineers read meters over telephone lines in trials, and in 1986 Itron shipped a small radio for gas meters that let readers collect figures by walking or driving past. Power-line signalling and, from the 2000s, two-way meter networks followed, so the utility could read every meter every day or every few minutes.
Where it stands
IoT Analytics counted over 1.06 billion smart electricity, gas and water meters worldwide at the end of 2023, about 43% of electricity meters; Counterpoint Research put the installed base at more than 1.8 billion at the end of 2024. The two firms count differently and their figures do not agree. The US Energy Information Administration counted 147.1 million advanced meters out of 169.8 million US electricity meters in 2025, about 87%. The data now sets hourly and half-hourly prices, reports outages, finds leaks and flags theft, while failures in Saskatchewan, Britain and the Netherlands showed what goes wrong when meters, networks or bills are rushed.
What is open
Much of the published work on meter data cannot be checked. Theft detectors are scored on a public Chinese dataset in ways that leak test answers, no public household dataset of water leaks with confirmed labels exists, and no open benchmark tests how well data systems catch and fix bad readings. Public smart meter datasets, open time-series models and cheap radio receivers let a small team build these tests now.
Domains
AchievedWatch forOpen
Domain
Progress
Last achieved
Watch for
Open
Meters
The meter is the box at the house: it measures electricity, gas or water, stores the readings, and hands them to a radio or wire for sending.
7 · 2 · 1
Last achievedIndia's prepaid meter drive2025
Watch forUltrasonic gas meters in New York
1
openCommunications
Communications is how a reading gets from the meter to the utility: by a radio picked up as someone walks or drives past, by signals sent along the power wires, or by fixed radio and mobile phone networks.
7 · 2 · 1
Last achievedMeter mesh radio becomes ISO standard2026
Watch forMeters over home broadband
1
openData and billing
Data and billing is what happens after a reading arrives: systems check and store it, fill gaps, work out what the customer owes under the tariff, and use detailed readings to set prices that change by hour or half hour.
7 · 2 · 2
Last achievedNorway's central data hub2019
Watch forBritain settles every half hour
2
openOutages, leaks and theft
Meter data shows where the power has gone off, where water or gas is escaping, and where energy is used but not paid for. Northeast Group, a consultancy, put the world's losses to electricity theft and other unbilled use at US$96 billion a year in 2017.
7 · 1 · 2
Last achievedMeters find household leaks2024
Watch forMeters that spot line faults
2
open
Open in smart metering
3 of 6 open deliverables
Open · Meters
Open waveforms for meter testing
A public library of the distorted current waveforms that household appliances draw (dimmed LED lamps, chargers, heat pumps), with an open simulation of a Rogowski-coil meter and a Hall-sensor meter that predicts each meter type's reading error on each waveform.
Built with what exists
The artificial test waveforms defined in the 2021 paper; commercial plug-through measurement adapters and clamp-on current probes for new recordings at the socket, with no wiring work; Python with NumPy and SciPy; Zenodo for publication.
Open · Communications
Measure meter radio range
A public, repeatable test of how often Wireless M-Bus meter messages (the 868 MHz radio format used by many European water, heat and gas meters) are received at each distance and through each kind of wall, for several common receivers.
Built with what exists
Meters the team owns; an RTL-SDR software radio running rtl-wmbus, and two USB receiver dongles; wmbusmeters; a laser rangefinder; Python. Receive only, on the licence-exempt band, and only the team's own meters.
Open · Data and billing
A test for bad-reading checks
A public answer key for "validation, editing and estimation" (VEE), the rules every meter data system runs to catch bad readings and fill gaps: real half-hourly readings with each fault (spikes, stuck values, clock shifts, meter swaps, runs of zeros) labelled by hand, plus a scoring script.
Built with what exists
The London Datastore smart meter data; Python with pandas; a labelling tool such as Label Studio; a rule-based VEE baseline written from published utility rules.