BRENNEN

Industries / Industrial equipment and services / Industrial services / Rope access

Repair and coating work

Repair and coating work is the fixing done from ropes once a fault is found: removing loose rock and stone, sealing cracks and joints, replacing cladding, and cleaning and painting steel.

4

Milestones achieved, from 1933 to 2014.

1

To watch for: announced, not yet confirmed outside.

2

Open deliverables. Nobody has shipped them.

The road

AchievedWatch forOpen

Achieved

  1. 1933

    Scaling the canyon on ropes

    Before Hoover Dam could be built, the loose rock of Black Canyon's walls had to come down. After the Colorado River was turned into diversion tunnels in November 1932, "high scalers" were lowered over the rim in safety belts or bosun's chairs (a plank seat hung from a rope) and stripped the walls with steel bars, 44 lb (20 kg) jackhammers and dynamite, for an average of 68 cents an hour, by the National Park Service's account. Reclamation says falling objects were the most common cause of death on the project; by the summer of 1933 the men were coating cloth hats with coal tar, and the contractor, Six Companies, then issued commercial hard hats to every man.

    LessonFor people working on ropes, what falls from above can kill as surely as a fall.

    usbr.govnps.gov

    Credit

    the high scalers of Six Companies; US Bureau of Reclamation

  2. 1989

    Borglum's crack filler fails

    Studies of Mount Rushmore begun in 1989 by the NPS and the Mount Rushmore Society mapped the granite's major fractures and found that the sculptor Gutzon Borglum's crack filler, a mix of linseed oil, white lead and granite dust, had dried out quickly and stopped keeping water out. Park staff replaced it with silicone sealant, dusted with granite to hide it, and since 1998 instruments on the main fractures have recorded movement four times a day. The work on the faces is done by rope access technicians, which the park described in 2010 as the only certified industrial rope team in the NPS.

    LessonA sealant that cannot move and breathe with the rock lets in the water that splits it.

    home.nps.govnps.gov

    Credit

    NPS, Mount Rushmore National Memorial; Mount Rushmore Society

  3. 2007

    Painters cut first offshore

    The UK Health and Safety Executive's Key Programme 3 inspected nearly 100 offshore installations from 2004 to 2007 and found fabric maintenance, the painting and upkeep of a platform's steel, walkways, handrails and fittings, "very poor on many platforms." When project and drilling work filled the limited beds on board, painting teams were often the first sent ashore, painting programs shrank or stopped, and corrosion rose; platforms that kept backlogs low planned their scaffolding and rope access needs alongside beds and staff.

    LessonWhere beds offshore are short, painting is deferred first and the cost returns as corrosion.

    hse.gov.uk

    Credit

    HSE Offshore Division, Hazardous Installations Directorate

  4. 2014

    Abseilers repair Christ the Redeemer

    After lightning broke a finger on the right hand of Rio de Janeiro's 30 m statue, its owner, the Archdiocese of Rio, gave the repair to a team of abseiling engineers so that no scaffold was needed and visitors could keep coming. The work, finished on 11 July 2014, restored the statue's soapstone mosaic, extended its lightning rods and improved its lightning protection; Brazil's space research institute INPE counts an average of six strikes a year on the monument, Agência Brasil reported.

    indcatholicnews.comagenciabrasil.ebc.com.br

    Credit

    Archdiocese of Rio de Janeiro and its rope repair team

Watch for

  1. One coat from the ropes

    Wescott Industrial Services says it repaired the coatings on all 102 main access platform cranes at ScottishPower Renewables' East Anglia ONE offshore wind farm over two years, with about 20 people a day and 55,867 offshore working hours without a lost-time incident, and that on crane booms its crews used rope access to apply a single-coat repair system, removing the need for scaffolds and lifting equipment. ScottishPower Renewables' project manager is quoted praising the work; no coating performance data are given.

    Achieved whenthe owner or an independent coating inspector publishes the condition of the single-coat repairs after several years, beside that of conventional multi-coat repairs.

    offshorewind.biz

    Claimed by

    Wescott Industrial Services, October 2025 (branded content)

Open

  1. 01

    Break ropes that met grit

    A published laboratory test of how much strength rope access ropes lose to the dirt that coating work brings: blasting grit (garnet, slag or steel grit) worked into the rope, and drips of epoxy or zinc primer cured on it. Samples are run through a descender (the friction device a technician lowers on) on a bench rig at ground level and then pulled to failure in a tensile machine, beside clean controls.

    The brief
    Credit · unclaimed
  2. 02

    Age one-coat repairs

    A published laboratory comparison of single-coat repair systems, of the kind Wescott applied from ropes, against a conventional multi-coat repair, on rusted steel panels prepared the ways a repair crew on ropes can manage, power-tool cleaning and spot blasting, and aged in the offshore cyclic test of ISO 12944-9.

    The brief
    Credit · unclaimed

Open 01 · the brief

Break ropes that met grit

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A published laboratory test of how much strength rope access ropes lose to the dirt that coating work brings: blasting grit (garnet, slag or steel grit) worked into the rope, and drips of epoxy or zinc primer cured on it. Samples are run through a descender (the friction device a technician lowers on) on a bench rig at ground level and then pulled to failure in a tensile machine, beside clean controls.

Why it is still open

Teufelberger, a rope maker, dragged rope access ropes over a ceramic edge and found "no way for the user to determine the discard criteria only by visual control"; a 2012 student project at Cal Poly found that sand and silt shortened the fatigue life of static kernmantle rope. A search found no published test of ropes contaminated with blasting abrasives or cured paint.

teufelberger.comdigitalcommons.calpoly.edu

Built with what exists

One production lot of low-stretch kernmantle rope of the kind used for rope access (EN 1891 type A); abrasives from a blasting supplier; two-part epoxy and zinc-rich primer; a motor-driven bench rig that pulls rope through a descender at a fixed load; a tensile testing machine at a university or accredited laboratory.

  1. First step

    Book time on a university tensile machine and cut 60 one-metre samples from a single rope lot.

  2. Done looks like

    At least 10 samples for each of five conditions (clean, three grits, cured paint) after 0, 100 and 500 passes through the descender; breaking loads, method and photos published; the test repeated on a second brand of rope.

Open 02 · the brief

Age one-coat repairs

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A published laboratory comparison of single-coat repair systems, of the kind Wescott applied from ropes, against a conventional multi-coat repair, on rusted steel panels prepared the ways a repair crew on ropes can manage, power-tool cleaning and spot blasting, and aged in the offshore cyclic test of ISO 12944-9.

Why it is still open

ISO 12944-9 qualifies offshore paint systems on steel blast-cleaned to Sa 2½ (nearly white metal) and "does not address maintenance in general where methods of surface preparation other than abrasive blast-cleaning are typically used." Wescott's account gives no measured performance for its single-coat repairs. The closest study read, a 2018 University of Cape Town thesis, compared wire brushing, rust converter and salt contamination under one coating over 30 days of cyclic testing, not single-coat against multi-coat systems.

cdn.standards.iteh.aioffshorewind.bizopen.uct.ac.za

Built with what exists

Weathered steel panels; a needle gun or bristle blaster for power-tool cleaning and an abrasive blast cabinet; two or three single-coat surface-tolerant epoxies and one three-coat reference system bought from their makers; an accredited laboratory that runs the ISO 12944-9 cyclic ageing test with a scribe line; pull-off adhesion testers (ISO 4624).

  1. First step

    Ask two coating makers for their single-coat repair products and data sheets, and get a quote from an accredited laboratory for one full test cycle.

  2. Done looks like

    Corrosion creep from the scribe and pull-off adhesion for every system on every preparation after the full ISO 12944-9 cycle, published with photos and with each product named.