BRENNEN

Industries / Industrial equipment and services / Industrial services / Rope access

Drones and robots as alternatives

Drones and robots now do some of the looking that rope access teams used to do on walls, dams and pipes, and building rules decide how much of the touching they may take over.

5

Milestones achieved, from 2021 to 2026.

1

To watch for: announced, not yet confirmed outside.

2

Open deliverables. Nobody has shipped them.

The road

AchievedWatch forOpen

Achieved

  1. 2021

    Photos cannot sound a wall

    New York City's Local Law 102 of 2020 asked DOB to study drones for the city's façade inspections, which require hands-on examinations, usually from a scaffold drop or by industrial rope access. Its report, released on 24 November 2021, found drones useful for photos, video and thermal images, but said that such images "cannot replace the current requirement for physical examinations", which include sounding (tapping to hear hollow spots) and probes and let the inspector remove a loose piece at once. Commercial drone flights in the city would also need the City Council to change the city's Administrative Code.

    LessonA photograph shows the surface; a piece about to fall is often found only by touch.

    nyc.govnyc.gov

    Credit

    NYC Department of Buildings (report by Jill Hrubecky and Wendy Wan); Council Member Robert E. Cornegy Jr

  2. 2022

    Singapore lets drones look

    From 1 January 2022 Singapore's Building and Construction Authority (BCA) has required façade inspections every seven years for buildings over 13 m tall and more than 20 years old, other than houses and temporary buildings: about 30,000 buildings in the first cycle. Drones flown by accredited providers may do the visual inspection, under a drone reference, TR78:2020, that BCA calls the world's first. Its guidelines still require a close-range inspection by physical contact, with a tapping rod, rubber mallet or similar tool, on at least 10% of each face of the building, and the authority's approval before infrared cameras or robotic tapping devices are used. Singapore told consultants working for New York that drones are now used in over 80% of its inspections.

    isomer-user-content.by.gov.sgisomer-user-content.by.gov.sgnyc.gov

    Credit

    BCA; Enterprise Singapore's standards programme

  3. 2022

    Japan accepts drone infrared

    In Japan, walls faced with tile, stone or mortar that could fall on people below must be tapped all over about once every ten years under the Building Standards Act's periodic reports. A notice from the Ministry of Land, Infrastructure, Transport and Tourism (MLIT), No. 110 of 2022, issued on 18 January and in force from 1 April 2022, named an infrared survey by drone as an accepted alternative. Studies in 2017 and 2018 with the government's building research institutes had found that, done to a set procedure, it finds loose tiles at least as well as tapping with a test hammer. A guideline written by a committee of the Japan Building Disaster Prevention Association sets the conditions, including when tapping must still be used alongside.

    mlit.go.jpmlit.go.jp

    Credit

    MLIT; National Institute for Land and Infrastructure Management; Building Research Institute; Japan Building Disaster Prevention Association

  4. 2025

    Ropes priced against a drone

    A September 2025 report by Carter Gulsvig of the US Bureau of Reclamation compared rope access with a drone for inspecting a 300-foot (about 90 m) penstock. Rope access gear cost about $30,360 against about $102,600 for a Flyability Elios 3 drone package with an ultrasonic thickness probe. Rope access needed three certified technicians and two plant staff for two days, plus 24 to 48 hours of venting before anyone could enter; the drone needed two operators and two staff for one day, and rope access labour cost about $10,000 more. Drone insurance of $8,000 to $10,000 a year is about a third of the rope access gear cost, so the report found the drone to be a complement, not a replacement, and cheaper mainly where scaffolding would otherwise be needed. It flew no field tests: a Department of the Interior order suspended non-emergency drone flights from January 2020 to October 2022.

    LessonWhere rope access works, a drone may cost more over time; it saves money where scaffolds or long shutdowns would otherwise be needed.

    data.usbr.gov

    Credit

    Carter Gulsvig, Bureau of Reclamation

  5. 2026

    Drones find about half

    In controlled trials at the University of Strathclyde, industrial participants flew drones to inspect a concrete block wall built with representative defects. Overall they detected about 50% of the defects, no participant exceeded 60%, large spalls and chips were found consistently and fine cracks were often missed, and only one participant gave even rough sizes. The authors note that studies comparing remote inspection with close visual inspection "are currently limited."

    LessonA camera that can reach the wall does not see what a person at arm's length sees.

    strathprints.strath.ac.uk

    Credit

    George Alliot, Adam Bannister and Hamish Dow, University of Strathclyde (Infrastructures, July 2026)

Watch for

  1. New York weighs drone pilot

    The December 2025 review of New York City's façade program, written for DOB by Thornton Tomasetti, recommends a pilot program to test whether drones, with computer vision software, could exempt some buildings from hands-on drops. It reports that 31% of the façade inspectors DOB surveyed had already used drones.

    Achieved whenDOB runs the pilot and publishes drone findings beside hands-on findings for the same façades, or a city rule lets a drone survey replace a hands-on examination.

    nyc.gov

    Claimed by

    Thornton Tomasetti for NYC DOB, December 2025

Open

  1. 01

    Test privacy masks through glass

    A public test of the software that blurs people in façade drone photos. Consenting volunteers stand behind real windows, by day and night, with reflections, blinds and tinted glass, and are photographed from the ground outside at 3 to 20 m. Each tool is scored on how many people it leaves recognizable.

    The brief
    Credit · unclaimed
  2. 02

    A robot reseals a joint

    A robot arm that does one of the commonest repairs made from ropes on tall buildings, replacing a failed sealant joint, on a mock-up wall built on the ground: it cuts out the old sealant, cleans and primes the joint faces, presses in a backer rod (the foam cord that sets the depth of the new sealant), and guns in and smooths the new sealant. The work is judged with the field adhesion test used on real joints.

    The brief
    Credit · unclaimed

Open 01 · the brief

Test privacy masks through glass

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A public test of the software that blurs people in façade drone photos. Consenting volunteers stand behind real windows, by day and night, with reflections, blinds and tinted glass, and are photographed from the ground outside at 3 to 20 m. Each tool is scored on how many people it leaves recognizable.

Why it is still open

Singapore's drone reference requires images of residents caught during façade inspections to be masked, and New York's 2021 drone report counts data collection and privacy among the obstacles to drone use. DroneDeploy's Privacy Mode masks faces and bodies by lowering their resolution, but its documentation gives no accuracy figures. Published drone anonymization work, such as Lee and colleagues' 2020 drone patrol system, deals with people in the open, not behind glass.

isomer-user-content.by.gov.sghelp.dronedeploy.comarxiv.org

Built with what exists

A camera used at ground level; signed consent forms; open tools such as deface (MIT licence) and Ultralytics YOLO person detection; commercial masks where their licences allow testing; CVAT for labelling.

  1. First step

    Photograph five consenting volunteers behind three kinds of window at three distances, by day and by night, and run one open blurring tool on the photos.

  2. Done looks like

    1,000 labelled photos showing at least 2,000 people behind glass; for each tool, the share of people two reviewers can still recognize, broken down by glass type, light and distance; the photo set released with the volunteers' consent.

Open 02 · the brief

A robot reseals a joint

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A robot arm that does one of the commonest repairs made from ropes on tall buildings, replacing a failed sealant joint, on a mock-up wall built on the ground: it cuts out the old sealant, cleans and primes the joint faces, presses in a backer rod (the foam cord that sets the depth of the new sealant), and guns in and smooths the new sealant. The work is judged with the field adhesion test used on real joints.

Why it is still open

Sealant replacement on towers is still hand work from platforms and ropes: at Chicago's Accenture Tower, where the 35-year-old sealants of a 588-foot curtain wall were replaced from 2021, crews reached about 80% of the wall from the building's two maintenance rigs and worked the parts the rigs and lifts could not reach by rope access, holding SPRAT Level 1 certificates. Taisei and Hitachi built a sealant-filling unit and a joint sensor in 1988, for new buildings only, and wrote that the work could be automated "only when all the aforementioned subsystems are established"; their cleaning, priming and backer-rod units were not reported. Robots seal aircraft structures in factories, as Broetje-Automation's systems do, but a search found no robot that removes old sealant from a building joint.

buildingenclosureonline.comiaarc.orgbroetje-automation.de

Built with what exists

A collaborative robot arm, such as a Universal Robots UR10e, with an oscillating blade, a brush, a backer-rod roller and a powered sealant gun; a depth camera to find the joint; a control policy trained from filmed demonstrations with Hugging Face's LeRobot software (Note: "No download") or NVIDIA's GR00T 2 robot model (Note: "Five demonstrations per task"); precast concrete panels with joints sealed and left to cure; the destructive procedure of ASTM C1521, the standard practice for checking the adhesion of installed sealant joints.

  1. First step

    Seal and cure six 1 m joints between concrete blocks, then film a sealant applicator cutting them out and resealing them, to serve as the first demonstrations.

  2. Done looks like

    Twenty joints, each 1 m long, on a mock-up wall no taller than 2 m; the share of old sealant left on the joint faces, measured from photos; new sealant depth within the maker's tolerance; three ASTM C1521 destructive adhesion tests per joint, each recording whether the sealant tore within itself or came away from the joint face; the time per metre set beside a professional sealant applicator's on matching joints.