BRENNEN

Industries / Transport and vehicles / Railcar manufacturing

Car bodies and welding

Car body work builds the shell of a railcar, its floor, sides, roof and ends, from steel, stainless steel, aluminum or composites, and joins the pieces by riveting, welding or bonding.

6

Milestones achieved, from 1904 to 2025.

2

To watch for: announced, not yet confirmed outside.

2

Open deliverables. Nobody has shipped them.

The road

AchievedWatch forOpen

Achieved

  1. 1904

    An all-steel subway car

    New York's first subway, the Interborough Rapid Transit (IRT), ran mostly in tunnels and wanted cars that would resist fire and collisions. Engineer George Gibbs of the Pennsylvania Railroad designed an all-steel car, and American Car and Foundry built 300 of them, numbered 3350 to 3649. The Seashore Trolley Museum, which keeps No. 3352, calls the run "the world's first all-steel vehicles". In a collision on 4 December 1907, No. 3352's steel anti-climbers, ridges on the car's end that stop one car riding up over another, kept its damage minor, while the wood-and-steel cars behind it were badly damaged.

    LessonEngineers had believed a car needed wood to absorb shocks, and a steel body did better.

    collections.trolleymuseum.org

    Credit

    George Gibbs; American Car and Foundry; the IRT

  2. 1934

    Shot-welded stainless steel

    Stainless steel loses its resistance to rust if it is held hot for too long while it is welded. Earl Ragsdale of the Edward G. Budd Manufacturing Company patented a way to spot weld it with a high current for a very short, timed burst, so the metal cools before that damage sets in. He called it shotwelding, and the patent was granted on 16 January 1934. Budd designed and built the Burlington railroad's Pioneer Zephyr with the process, and the American Society of Mechanical Engineers calls it the first diesel-powered, stainless-steel streamlined train. On 26 May 1934 it ran nonstop from Denver to Chicago in just over 13 hours, by the Griffin Museum of Science and Industry's account.

    patents.google.comasme.orggriffinmsi.org

    Credit

    Earl J. W. Ragsdale; Budd Company

  3. 1997

    Welding aluminum without melting

    Friction stir welding, invented and patented at TWI in Cambridge, England, in 1991, joins two pieces of metal by stirring the seam with a spinning tool until the metal softens, without melting it. It warps long, thin aluminum panels far less than arc welding, which spares the hand work of straightening and filling them afterward. By TWI's 2002 account, Alstom LHB bought friction-stir-welded roof panels made by Sapa for Copenhagen suburban trains from 1997, and Hitachi in Japan was building commuter and express trains from double-skin aluminum extrusions, long hollow sections with two walls joined by ribs, welded this way. Hitachi's engineers reported 319 such cars built by June 2002.

    twi-global.comjstage.jst.go.jp

    Credit

    TWI; Sapa; Alstom LHB; Hitachi

  4. 1999

    Welds unzip at Ladbroke Grove

    On 5 October 1999 two trains collided at Ladbroke Grove Junction in London, killing 31 people. An inspector from the rail regulator saw the leading train's aluminum body shell "splitting along weld lines", and the public inquiry put the failures down to "weld unzipping", a fast, brittle fracture along the welds. Researchers at Newcastle University, working with Bombardier and Alcan in the EU's ALJOIN project (2002 to 2005) and the rail safety body RSSB's ALJOIN plus, traced the failures to crash-speed loading and weak weld metal, and designed a stronger joint. Their findings fed two European standards: EN 15085, on welding railway vehicles, and EN 15227, which sets the collisions a car body must survive by design. Both have applied since 2008.

    LessonA welded joint must be designed for the way it breaks in a crash, not only for everyday loads.

    orr.gov.ukimpact.ref.ac.uk

    Credit

    Newcastle University; Bombardier Transportation; Alcan; RSSB

  5. 2013

    A laser-welded stainless car

    In 2013 Japan Transport Engineering Company (J-TREC), formerly Tokyu Car, began testing a prototype of its Sustina stainless steel commuter car in passenger service in Tokyo, as part of a Tokyu Series 5050 train on the Toyoko Line. Its body is joined by laser welding, is watertight and needs no paint, and J-TREC says it is up to 30% lighter than a mild steel body and close to an aluminum one. J-TREC engineers wrote in 2021 that more and more stainless car bodies are being assembled with laser welding alongside spot welding.

    railwaygazette.comfujipress.jp

    Credit

    J-TREC; Tokyu Corporation

  6. 2025

    Carbon fiber carries the load

    On 10 January 2025 the CETROVO 1.0, a six-car metro train developed by CRRC and Qingdao Metro Group, entered passenger service on Qingdao Metro Line 1 in China, as the trade site Railway News also reported. CRRC calls it the first subway train in commercial service whose main load-bearing structure is made of carbon fiber composites, plastics reinforced with carbon fibers. By CRRC's own figures its body is 25% lighter and the whole train about 11% lighter than a metal train, and it uses 7% less energy. No outside measurement of those figures was found.

    crrcgc.ccrailway-news.com

    Credit

    CRRC; Qingdao Metro Group

Watch for

  1. Robot-welded shells in New York

    Alstom opened a $75 million plant in Hornell, New York, to build stainless steel car body shells, work it previously did in Brazil. The company says the plant uses robots and "AI-powered automated welding systems" that hold its welds to within one millimeter. Its first order is 200 multilevel commuter cars for Metra in Chicago.

    Achieved whenMetra or another outside party reports body shells from the plant delivered and accepted, or measures the welding accuracy claimed.

    metro-magazine.com

    Claimed by

    Alstom, June 2025

  2. Pilbara-built ore wagons

    Gemco Rail is building 100 heavy iron ore wagons in Karratha, Western Australia, under an A$150 million partnership with the mining company Rio Tinto and the Chinese wagon builder CRRC Qiqihar. AMT Magazine calls them the region's first locally built rail wagons. The local distributor Robotic Automation installed a large Yaskawa Motoman robotic welding system there and says it has raised throughput, without giving numbers.

    Achieved whenall 100 wagons are delivered and Rio Tinto or an outside party reports their build time and weld quality.

    amtil.com.au

    Claimed by

    Robotic Automation, in AMT Magazine, April 2026

Open

  1. 01

    Straightening data for side walls

    A public set of 3D scans of thin welded steel or stainless steel body panels, each scanned before and after a skilled worker straightens it with heat, with the place and order of every heat spot recorded. Add software that reads a "before" scan and proposes heat spots, scored against what the worker did. The shop's own qualified staff do the heating; the project only scans and records.

    The brief
    Credit · unclaimed
  2. 02

    An open crumple-zone model

    A free, open computer model of a passenger car's end structure and its crash energy absorber, the part built to crush in a controlled way, set up for the collision cases in EN 15227 and checked against published crash test results, so that anyone can try a lighter or cheaper design against the same cases.

    The brief
    Credit · unclaimed

Open 01 · the brief

Straightening data for side walls

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A public set of 3D scans of thin welded steel or stainless steel body panels, each scanned before and after a skilled worker straightens it with heat, with the place and order of every heat spot recorded. Add software that reads a "before" scan and proposes heat spots, scored against what the worker did. The shop's own qualified staff do the heating; the project only scans and records.

Why it is still open

Welding the outer skin to a car body's frame warps it, and the panels are "typically straightened manually, using a flame torch", in the words of a patent filed by Bombardier Transportation (now owned by Alstom) in 2017 that claims scanning the panel and heating it automatically along a computed path. A 2017 study of the steel sheet used for Indian Railways cars says flame straightening is used in railway shell manufacturing and "suffers from several shortcomings" in quality, safety and cost. This research found no published results from the patented method and no public set of before-and-after scans on GitHub or Zenodo.

patents.google.comzenodo.org

Built with what exists

A structured-light 3D scanner or a phone with a depth sensor; Open3D or CloudCompare to compare each scan with the flat target shape; a thermal camera to log where and when each spot was heated; PyTorch to train a model that turns a map of warping into a list of heat spots.

  1. First step

    Ask a railcar builder, a car body repair shop or a welding school that teaches heat straightening to let you scan five panels before and after the work.

  2. Done looks like

    Before-and-after scans of at least 50 panels with every heat spot logged, released under an open license, and a published table for 10 held-out panels showing what share of the worker's heat spots the software placed within 50 mm and how many extra spots it proposed.

Open 02 · the brief

An open crumple-zone model

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A free, open computer model of a passenger car's end structure and its crash energy absorber, the part built to crush in a controlled way, set up for the collision cases in EN 15227 and checked against published crash test results, so that anyone can try a lighter or cheaper design against the same cases.

Why it is still open

EN 15227 has governed European car body design since 2008, and builders model crashes in commercial software. This research found no public model of a rail vehicle's crumple zone on GitHub or Zenodo or in Crossref's records. Published work such as the FRA's tests of a push-back coupler and a deformable anti-climber on locomotives reports results but shares no model files.

impact.ref.ac.ukdoi.org

Built with what exists

OpenCourant, the open-source crash solver that continues OpenRadioss under the AGPL v3 license (github.com/OpenCourant/OpenCourant); FreeCAD and Gmsh to draw and mesh the parts; ParaView to view results.

  1. First step

    Pick one published crash absorber test that gives force against crush distance, and model only the absorber in OpenCourant.

  2. Done looks like

    A released model whose peak force and crush distance match a published absorber test within 10%, run for at least two EN 15227 collision cases, with inputs, results and a written method that anyone can rerun.