BRENNEN

Industries / Transport and vehicles / Maritime and shipping / Ports and terminals

Yard equipment

Yard equipment carries containers between the quay and the stacks where they wait, and stacks them: straddle carriers, gantry cranes on rubber tires or rails, driverless carts and reach stackers.

7

Milestones achieved, from 1976 to 2023.

2

To watch for: announced, not yet confirmed outside.

2

Open deliverables. Nobody has shipped them.

The road

AchievedWatch forOpen

Achieved

  1. 1976

    Straddle carriers take boxes

    A straddle carrier is a tall vehicle that drives over a container, lifts it from above and carries it between its legs. Kalmar traces the machine to a straddle carrier for industry built in Härmälä, Finland, in the 1940s, and to 500 lumber carriers that Valmet built there in the 1950s as war reparations to the Soviet Union. Valmet made its first prototypes for container straddle carriers in 1976. Kalmar says more than 2,500 of the resulting Kalmar Classic were delivered over the next four decades.

    kalmarglobal.com

    Credit

    Valmet, now part of Kalmar

  2. 1985

    The reach stacker

    A reach stacker is a heavy truck with a long arm, called a boom, that picks up containers and stacks them without rails or a fixed crane. Kalmar says it "completed the first prototype reachstacker" in 1985, with commercial deliveries the following year.

    kalmarglobal.com

    Credit

    Kalmar

  3. 2002

    Hamburg's automated yard opens

    HHLA built Container Terminal Altenwerder (CTA) in Hamburg in 2002 on undeveloped land. Automated guided vehicles (AGVs), driverless carts, carry boxes between the quay cranes and 26 storage blocks, routed by software over more than 17,000 transponders set in the ground. Each block has two rail-mounted gantry cranes of different heights; the smaller drives under the larger, so both can work at once and one keeps going if the other fails. HHLA says the yard holds about 20,000 TEU.

    hhla.deverkehrsrundschau.de

    Credit

    HHLA

  4. 2005

    Straddle carriers drive themselves

    Kalmar says "the first fully automated straddle carrier terminal" opened in Brisbane, Australia, in 2005, using its AutoStrad system. Liebherr's 2023 release names the terminal, Patrick Terminals' Brisbane AutoStrad, as still working.

    kalmarglobal.comliebherr.com

    Credit

    Patrick Terminals and Kalmar

  5. 2017

    Qingdao goes automated

    Qingdao New Qianwan Container Terminal (QQCTN) in China was built in three and a half years and worked its first deep-sea ship, COSCO France, on 11 May 2017. Navis, which supplied its terminal operating system (the software that plans every move), reported an average of 26.1 moves per hour per crane on that call. Kaleris, which now sells the same software, says the terminal later unloaded 1,992 containers from the Santos Express at 43.23 moves per hour on 31 December 2018, and that "9 remote operators can do the work of 60-80 operators for the first 2 berths." All three figures are the software supplier's.

    safety4sea.comkaleris.com

    Credit

    QQCTN

  6. 2022

    Auckland drops automation

    Ports of Auckland ended its project to automate its container terminal in June 2022. The project began in 2016 and had been due to finish in late 2019 or early 2020. Its cost of NZ$65 million, most of it software, was written off, and its 27 automated straddle carriers are to be converted to manual driving. Chief executive Roger Gray said the port "couldn't determine when the system would be stable enough and able to produce at a level we needed to go live."

    LessonBuying self-driving machines does not buy a working yard; the software that ties them together carried most of the cost and the risk.

    1news.co.nz

    Credit

    Ports of Auckland board; reported by 1News

  7. 2023

    A battery-only cart fleet

    CTA retired its last diesel-powered AGV in the fourth quarter of 2023, leaving a fleet of 95 battery-electric vehicles, the trade paper Verkehrsrundschau reported, citing CTA. CTA says the change saves about 3 million liters of diesel a year, about 8,000 metric tons of carbon dioxide.

    verkehrsrundschau.dehhla.de

    Credit

    HHLA

Watch for

  1. Hydrogen straddle carrier in Hamburg

    HHLA is testing a Konecranes straddle carrier that runs on a hydrogen fuel cell at Container Terminal Tollerort. It calls the machine "the first hydrogen-powered straddle carrier at the Port of Hamburg" and says first experience shows the same handling performance as the hybrid version. It gives no figures.

    Achieved whenmeasured fuel use per move and uptime are published, and the carrier, or a fleet like it, goes into routine work.

    hhla.de

    Claimed by

    HHLA, September 2025

  2. Dual-fuel carrier in Antwerp

    PSA Antwerp completed tests of a second-generation straddle carrier that burns a mix of diesel and hydrogen, developed at its Noordzee Terminal with CMB.TECH, Kalmar, Volvo and Air Products. The report gives a 63% to 70% cut in carbon dioxide against a standard hybrid straddle carrier and up to 78% less diesel than conventional diesel machines, without naming who measured them.

    Achieved whenan independent body publishes the measured fuel use and emissions, or PSA puts such carriers into routine service.

    waterstofnet.eu

    Claimed by

    PSA Antwerp, May 2026

Open

  1. 01

    A real yard log, published

    A public, anonymized record of real yard crane work for at least one terminal over at least a month: where every container sat in a block at the start, then every storage, retrieval and relocation move with its time. A relocation is a move made only to dig out a box buried under others, and as an MIT paper notes, it "cannot be charged to customers." Add baseline scores from published methods for cutting relocations.

    The brief
    Credit · unclaimed
  2. 02

    Energy per move, compared

    A public table of zero-emission yard machine trials worldwide (battery and hydrogen straddle carriers, rubber-tired gantries, reach stackers, top handlers and AGVs) that turns each published figure into one unit, energy or fuel per container move, and marks who measured it.

    The brief
    Credit · unclaimed

Open 01 · the brief

A real yard log, published

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A public, anonymized record of real yard crane work for at least one terminal over at least a month: where every container sat in a block at the start, then every storage, retrieval and relocation move with its time. A relocation is a move made only to dig out a box buried under others, and as an MIT paper notes, it "cannot be charged to customers." Add baseline scores from published methods for cutting relocations.

Why it is still open

Public test sets for this problem are made up. The Blocks Relocation Problem set by Jovanovic, Tanaka, Nishi and Voss says its instances are "randomly generated." An MIT team tested its method on 17 days of moves from two blocks at a real terminal in September 2017 (2,181 storage and retrieval moves and 930 relocations), but the inputs in its public code repository are generated instances only.

mail.ipb.ac.rsmit.edugithub.com

Built with what exists

An export from a terminal operating system such as Navis N4; a Python script that shifts dates and drops container numbers and owners; open solvers such as HiGHS or Google OR-Tools; the MIT team's open code as a baseline; an AI coding agent to write the converters and tests.

  1. First step

    Write to the MIT authors and to two terminal operators that publish research partnerships, asking whether an anonymized month of yard moves can be released, and draft the anonymization rules.

  2. Done looks like

    A dataset under an open license with at least 30 days and 5,000 moves from at least two blocks, released with the terminal's written consent, and relocation counts from at least three published methods, reproduced by one outside group.

Open 02 · the brief

Energy per move, compared

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A public table of zero-emission yard machine trials worldwide (battery and hydrogen straddle carriers, rubber-tired gantries, reach stackers, top handlers and AGVs) that turns each published figure into one unit, energy or fuel per container move, and marks who measured it.

Why it is still open

Trial results are mostly unpublished or unattributed. DP World's hydrogen rubber-tired gantry crane in Vancouver entered a one-year field trial to track hydrogen use and energy recovery, and its release gives only factory test figures (a 40-ton load lifted and lowered 105 times in 16 hours). HHLA's hydrogen straddle carrier report gives no numbers, and PSA Antwerp's figures name no measurer. The San Pedro Bay Ports' 2026 equipment assessment covers Los Angeles and Long Beach, and its release lists no measured results.

dpworld.comhhla.dewaterstofnet.eucleanairactionplan.org

Built with what exists

A web-browsing agent to gather releases, grant reports and papers (see the Note "Deleting 80% to start over"); a document-reading AI model to pull out the figures; a spreadsheet with written conversion rules; the San Pedro Bay Ports' feasibility assessments as a starting list.

  1. First step

    Enter the DP World Vancouver, HHLA Tollerort and PSA Antwerp trials, and write to each operator asking for per-move figures.

  2. Done looks like

    At least 30 trials from at least 8 countries, each with its source, machine type, hours of operation and energy or fuel per move where the source allows, every number labeled as the maker's, the operator's or independent, and 10 rows checked by a second person.