Industries / Mining and materials / Plastics and rubber
Bottles and blow molding
Blow molding inflates a hot plastic tube, or a test-tube-shaped "preform", inside a mold to make hollow parts such as bottles, jugs, drums and fuel tanks.
6
Milestones achieved, from 1938 to 2024.
3
To watch for: announced, not yet confirmed outside.
2
Open deliverables. Nobody has shipped them.
The road
AchievedWatch forOpen
Achieved
1938
Blowing plastic like glass
An 1851 US patent by S. T. Armstrong had already described blowing a tube of gutta-percha, a natural rubber-like gum, against a mold wall. In 1938 William H. Kopitke of Plax Corporation filed a patent for a machine to make hollow articles from plastics, granted in 1941. A 2011 review in Kunststoffe says Owens-Illinois "produced the first plastic bottles on an industrial scale", for the US Army Medical Corps from 1939 to 1946.
Credit
William H. Kopitke, Plax Corporation; Owens-Illinois Glass
1949
Extrusion blow molding machine
In extrusion blow molding, an extruder lowers a tube of molten plastic, a mold closes on it, and air blows it into shape. Reinold and Norbert Hagen of Kautex Werke in Bonn built such a machine in 1949 for bottles, containers and other hollow parts. The same review's text calls it the first, while its photo caption says "Europe's first". Around 1955, Kautex machines began going to the United States.
Credit
Reinold and Norbert Hagen, Kautex Werke
1973
Stretched PET holds fizz
A biaxially oriented bottle is stretched both lengthwise and around, which lines up its molecules and lets a thin wall hold pressure. DuPont's patent for such a PET bottle, for "beer, carbonated beverages, or aerosols", was granted on 15 May 1973. The Plastics Hall of Fame says US PET bottle production went from "negligible in 1977" to "2.5 billion containers by 1980".
LessonWyeth's early plastic "kept stretching in one direction until it burst", while PET stopped stretching in one place once it reached its limit and stretched elsewhere instead.
Credit
Nathaniel Wyeth and R. Roseveare, DuPont
1977
A plastic bottle banned
Coca-Cola's "Easy-Goer" bottle, made by Monsanto from an acrylonitrile plastic, reached the market in 1975. The US Food and Drug Administration (FDA) banned acrylonitrile drink containers in 1977 because acrylonitrile could move from the bottle into the drink. A federal appeals court upheld the decision in part in 1979, and Coca-Cola turned to PET.
LessonWhat leaks from a container into the drink can end a bottle material, however light or unbreakable it is.
Credit
US FDA (regulator); Monsanto and Coca-Cola (the bottle)
2008
Water bottles get lighter
The average 500 mL (16.9-ounce) PET water bottle in the US weighed 18.9 g in 2000 and 12.7 g in 2008, a drop of 32.6%. These are Beverage Marketing Corporation's figures, from a study for the International Bottled Water Association, a trade group.
Credit
bottlers and machine makers across the industry; measured by Beverage Marketing Corporation
2024
Caps stay on bottles
From 3 July 2024, EU Directive 2019/904 lets drink containers with plastic caps be sold only if "the caps and lids remain attached to the containers during the products' intended use stage". The same law sets at least 25% recycled plastic in PET drink bottles from 2025, and 30% in all plastic drink bottles from 2030.
Credit
European Parliament and Council
Watch for
Lighter bottles in recycled PET
KHS says it showed a 0.25 L bottle weighing 6.2 g and made of 100% recycled PET (rPET) at the drinktec fair in September 2025. Earlier, KHS and Husky said a 591 mL water bottle of theirs uses 5.89 g, which they say is 30% less than the usual US lightweight bottle of about 7 g.
Achieved whena bottler sells drinks in these bottles and an outside party reports their weight and strength from production.
Claimed by
KHS, September 2025 (with Husky Technologies, May 2025)
Laser-heated preforms
Sidel's EvoBLOW Laser heats preforms with lasers instead of halogen lamps, using up to 36 heating lines against ten zones in a comparable halogen oven. Sidel's CEO calls it "the world's first industrialised laser-powered solution". The bottler Refresco, a partner in the project and not an independent tester, reported cutting the material in its 1.5 L PET bottles "by as much as 15%".
Achieved whenseveral bottlers use it in routine production, or an independent party measures the material and energy savings against halogen ovens.
Claimed by
Sidel, September 2025; Refresco result, February 2026
The 25% recycled bottle target
In July 2025 the European Commission consulted on rules for "calculating, verifying and reporting recycled content" in drink bottles, including chemically recycled content. These rules back the 25% target for PET bottles in 2025. A February 2025 trade article gave the average as 24%, from 2022 data, and expected the target to be met.
Achieved whenverified EU data for 2025 show that PET drink bottles averaged at least 25% recycled plastic.
Claimed by
European Commission, July 2025
Open
01
Predict bottle walls from heat
An open model, with a public test set, that predicts how thick a stretch-blown PET bottle's wall will be at each height, from the preform's temperature profile and the machine settings.
The briefCredit · unclaimed02
Test a bottle's recycled share
A blind test of whether a spectrometer reading (Raman or near-infrared) plus an open model can tell how much recycled PET is in a bottle bought in a shop.
The briefCredit · unclaimed
Open 01 · the brief
Predict bottle walls from heat
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
An open model, with a public test set, that predicts how thick a stretch-blown PET bottle's wall will be at each height, from the preform's temperature profile and the machine settings.
Why it is still open
In May 2026 the bottle-testing firm BMT described a plant where unchanged blow-molder settings gave stable bottles from one shift's preforms and blowouts from another's. It says measuring preform temperature "reduces reliance on trial-and-error adjustments". The prediction and control tools that exist are closed: BMT's simulation, which BMT says matched physical tests within about 1%, and Agr's Process Pilot closed-loop control. A search found no public dataset that links preform temperature to measured wall thickness.
Built with what exists
Published thickness and temperature data from open-access papers; open finite-element software such as FEniCSx or Code_Aster; scikit-learn or PyTorch for fast stand-in models. Any new blowing tests use high-pressure air and belong in a university lab, with a Hall-effect thickness gauge and an infrared camera.
First step
List every open-access paper that reports both a preform temperature profile and measured bottle wall thickness, and put the numbers in one spreadsheet with citations.
Done looks like
Predicted thickness within 15% of measured at ten heights, on at least five bottle-and-preform cases not used for fitting. Data, code and the error table are published.
Open 02 · the brief
Test a bottle's recycled share
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A blind test of whether a spectrometer reading (Raman or near-infrared) plus an open model can tell how much recycled PET is in a bottle bought in a shop.
Why it is still open
The instrument maker Shimadzu notes that "appearance and conventional physical properties alone are insufficient to distinguish virgin material" from recycled PET. The EU's 2025 work sets rules for calculating and reporting recycled content, not for testing the bottle itself. Lab methods exist, such as a 2022 study that profiled volatile compounds by gas chromatography, but no blind test on shop-bought bottles was found.
Built with what exists
Bottles whose labels state their recycled content (0%, part recycled, 100%); a benchtop or handheld Raman or near-infrared spectrometer at a university; scikit-learn for the statistics; a contract lab's gas chromatography for reference results.
First step
Buy 30 bottles that state their recycled content, photograph the labels, cut a 2 cm by 2 cm sample from each, and book an afternoon on a university Raman instrument.
Done looks like
At least 60 bottles from at least ten brands, coded so the tester cannot see the labels. A published tally of correct calls in three classes (virgin, part recycled, 100% recycled), with the full table of results, against a target of 90% correct.