Industries / Food, farming and forestry / Food and beverage processing / Pet food
Dry food
Dry food is cooked into hard, shelf-stable pieces, mostly by extrusion, then dried and coated with fat and flavorings.
5
Milestones achieved, from 1957 to 2026.
2
To watch for: announced, not yet confirmed outside.
2
Open deliverables. Nobody has shipped them.
The road
AchievedWatch forOpen
Achieved
1957
Kibble from an extruder
An extruder cooks moist dough under heat and pressure inside a turning screw and pushes it through a shaped hole, where it puffs into a piece that is then dried. Purina says it made the first kibble this way in 1957; the machine maker Wenger dates its own cooking extruder to 1958 and its smaller extruders for pet food to 1960.
Credit
Ralston Purina; Wenger
1996
A humectant banned for cats
Semi-moist food and treats stay soft because humectants such as propylene glycol bind water so that microbes cannot use it. In a rule published on 2 May 1996, the US Food and Drug Administration (FDA) found that propylene glycol in or on cat food has not been shown to be safe and makes the food adulterated; the rule names cat food only.
Credit
US Food and Drug Administration
2008
Extrusion's trade-offs reviewed
A review in the Journal of the Science of Food and Agriculture set out what extrusion does to dry pet food: it makes food tastier and its starch and protein easier to digest, and destroys unwanted compounds, but it lowers protein quality through the Maillard reaction, the browning of sugars with protein, and destroys heat-sensitive vitamins. The authors found that such studies on pet food, as opposed to livestock feed, were scarce.
Credit
Q. D. Tran, W. H. Hendriks and A. F. van der Poel
2025
Liquid fat makes extruders surge
Dry pet food seldom holds more than 200 g of fat per kg, because fat lubricates the dough and causes processing and quality problems. In a 2025 trial, soybean oil pumped into the preconditioner, the mixing chamber ahead of the extruder, needed a screw speed of 404 rpm to reach the target density, against 351 rpm when the same fat came inside whole soybeans, and it made the extruder surge and the kibble vary more in size.
Lessonfat carried inside an ingredient upsets the extruder less than oil pumped in.
Credit
H. S. Kim, C. G. Aldrich, S. Alavi and colleagues
2026
Fish oil fades on kibble
University of Guelph researchers coated kibble with 10 different fats and oils and stored it for 15 months at room temperature. On average the long-chain omega-3 fats EPA and DHA fell by 98.7% and 77.9%, and a natural antioxidant blend added at 200 ppm did not reliably extend shelf life.
Lessonone antioxidant dose does not protect every oil.
Credit
A. Rankovic, A. K. Shoveller and colleagues, University of Guelph
Watch for
Extruder cleaning time halved
Bühler says its Nutrex 7 Series twin-screw extrusion platform, shown at the Interpack trade fair in Düsseldorf in May 2026, already runs at selected customer sites, where cleaning time fell by about 50%.
Achieved whena named pet food plant or an outside auditor publishes cleaning and changeover times measured before and after the change.
Claimed by
Bühler, May 2026
Software sets extruder settings
Wenger and Extru-Tech say EXPRO AI, software built on TwinThread's platform, learns from a plant's past and live process and quality data to predict product quality and prescribe extruder settings for each recipe and line, giving a significant reduction in process variability. They give no figures.
Achieved whena named pet food plant or an outside party publishes measured variation, such as the spread of kibble bulk density, before and after the software was installed.
Claimed by
Wenger and Extru-Tech, May 2025
Open
01
Label kibble defects on camera
A public set of at least 10,000 photographed kibble pieces, each outlined and labelled as whole, broken, fused (two pieces stuck together), misshapen, scorched or unevenly coated, with a baseline model that finds and counts each kind in a photo of a sample tray.
The briefCredit · unclaimed02
Energy per tonne of kibble
An open table of the natural gas, electricity and water that pet food plants use per tonne of food made, plant by plant, with the format made (dry, wet or fresh) and a link to the public document behind each figure: air permits, sustainability reports, grant reports and planning filings.
The briefCredit · unclaimed
Open 01 · the brief
Label kibble defects on camera
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A public set of at least 10,000 photographed kibble pieces, each outlined and labelled as whole, broken, fused (two pieces stuck together), misshapen, scorched or unevenly coated, with a baseline model that finds and counts each kind in a photo of a sample tray.
Why it is still open
Line checks measure samples in bulk. Wenger's Auto Density Control, for example, measures a sample's bulk density as often as every 45 seconds, which says nothing about single pieces. The one public kibble image set found, PetFood on Roboflow Universe (CC BY 4.0), holds 42 images labelled by shape, not by defect, and searches of GitHub, Hugging Face and Europe PMC on 18 November 2026 found no set of defects.
Built with what exists
A phone or machine-vision camera fixed over a black tray under diffuse light; Label Studio for labelling; Meta's Segment Anything 2 to outline pieces; Ultralytics YOLO11 for detection; a kitchen scale and test sieves to check counts by hand.
First step
Buy five bags of differently shaped kibble, photograph 20 trays from each, and label the first 1,000 pieces.
Done looks like
10,000 labelled pieces from at least 30 retail bags of at least 15 brands, released under an open license, and a baseline whose count of broken pieces per tray is within 10% of a person's count on 50 held-out trays.
Open 02 · the brief
Energy per tonne of kibble
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
An open table of the natural gas, electricity and water that pet food plants use per tonne of food made, plant by plant, with the format made (dry, wet or fresh) and a link to the public document behind each figure: air permits, sustainability reports, grant reports and planning filings.
Why it is still open
Public figures stop short of a per-tonne number. Australia's Renewable Energy Agency (ARENA), which is co-funding an 18 MW solar thermal plant at Mars Petcare's Wodonga factory, says it should cut the site's natural gas use by over 50% and its emissions by up to 4,000 t CO2-e a year, but gives no tonnage of food made. Life cycle studies, such as Costa and colleagues' 2024 assessment of one extruded dog food made in Brazil, model a single product rather than compare plants.
Built with what exists
Public permit databases such as the US Environmental Protection Agency's ECHO; company sustainability reports; an AI model to pull figures out of PDFs, with every figure checked by a person (document review by AI is covered in the note "Seven more flagged"); a spreadsheet or SQLite.
First step
Download the air permits of ten US pet food plants from state permit portals and record each dryer's burner rating and the plant's permitted output.
Done looks like
50 plants in at least five countries, each with energy and water per tonne or a stated reason it cannot be computed, and every number traceable to a page of a public document.