Industries / Construction and property / Commercial and residential construction / Painting
Estimating
Estimating is measuring the surfaces to be painted, working out the labor hours and paint they will take, and turning that into a price.
4
Milestones achieved, from Late 1930s to 2022.
1
To watch for: announced, not yet confirmed outside.
2
Open deliverables. Nobody has shipped them.
The road
AchievedWatch forOpen
Achieved
Late 1930s
Painters agree how to measure
The Painting and Decorating Contractors of America (PDCA), now the Painting Contractors Association (PCA), says it has published estimating guidelines for the trade since the late 1930s. Its standard P10 fixes how surface area is counted, so that the hours and paint used on past jobs can price future ones: nothing is measured as narrower than one foot, so trim counts as at least one square foot per linear foot; small openings in a wall are ignored; openings of 100 square feet or more are deducted; and cabinets or tubs that get in the painter's way are not subtracted.
Credit
PDCA, now PCA
1990
Labor hours for every task
The US Navy, Army and Air Force issued a joint Paint Handbook of Engineered Performance Standards (NAVFAC P-710.0, Army TB 420-18, Air Force AFM 85-49) in October 1990, replacing an edition of July 1984, so that planner-estimators on bases could forecast the labor hours of maintenance painting. It gives a time for each task, such as 0.00777 labor hours per square foot to brush one coat onto an acoustical ceiling, about 129 square feet an hour, and leaves travel and material handling to a separate desk guide.
Credit
Naval Facilities Engineering Command, with the US Army and Air Force
2014
Coverage tested for the label
A paint's spreading rate is the wall area one liter covers, and it decides how much paint an estimate allows. Under the European Commission's EU Ecolabel criteria for indoor and outdoor paints of 28 May 2014, a white or light-colored paint carrying the label, which makers apply for voluntarily, must cover at least 8 m² per liter indoors, or 6 m² outdoors, at a hiding power of 98%, measured by ISO 6504-1 or ISO 6504-3, test methods that judge how well a coat hides a black and white chart beneath it. For tinted paints the test is run on the white base, and the can must say which primer or undercoat to use under darker shades.
Credit
European Commission
2022
Phones draw the room
Apple released RoomPlan in 2022, software that uses the camera and LiDAR depth sensor of an iPhone or iPad to build a 3D plan of a room with its walls, doors and windows. Apple reports 95% precision and recall in detecting walls and windows on scans of thousands of rooms, which measures whether it finds them, not how long they are. Floor-plan apps such as RoomScan Pro are built on it, and an outside review in August 2026 judged iPhone scans accurate to about 1 to 3 cm in normal rooms, enough for material takeoffs but not for permit drawings.
Credit
Apple
Watch for
AI takeoffs for painters
A takeoff is the list of quantities measured off the drawings. On Center Software says Takeoff Boost, the AI feature of its On-Screen Takeoff program, finds walls on a plan and measures both sides of each interior wall, reads wall heights from reflected ceiling plans and paint tags such as PT-1 from finish plans, and cuts painting contractors' takeoff time "by up to 95%". It gives no error figures against an estimator's own takeoff.
Achieved whenan outside party compares its painting takeoffs with estimators' takeoffs of the same plan sets and publishes the area errors.
Claimed by
On Center Software, January 2026
Open
01
Phone scans checked for painting
A public test of whether phone room scans give the wall and ceiling areas a painter bids on. Scan at least 20 furnished rooms with two or more apps built on RoomPlan, turn each scan into paintable area under PCA's P10 counting rules, and compare that, room by room, with the same rooms measured by a painter with a tape and a laser distance meter.
The briefCredit · unclaimed02
Bids checked against real hours
An open table of finished repaint jobs, each with its measured areas, the estimated labor hours and gallons, and the hours and gallons actually used, so that published rate tables and AI quoting tools can be scored on the same jobs.
The briefCredit · unclaimed
Open 01 · the brief
Phone scans checked for painting
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A public test of whether phone room scans give the wall and ceiling areas a painter bids on. Scan at least 20 furnished rooms with two or more apps built on RoomPlan, turn each scan into paintable area under PCA's P10 counting rules, and compare that, room by room, with the same rooms measured by a painter with a tape and a laser distance meter.
Why it is still open
Apple's published figures for RoomPlan measure how often it finds walls, doors and windows, not how far off its lengths and areas are, and a search in November 2026 found reviews quoting 1 to 3 cm but no published test of scanned wall area against hand measurement for painting. Tee-Ann Teo and Chen-Chia Yang of National Yang Ming Chiao Tung University found in 2023 that an iPad Pro's lidar points lay within 1 mm of a flat wall when the iPad was held still and about 1 cm when it was moving, but they tested the raw points and models built from them, not the areas that RoomPlan apps report. PCA tells estimators to measure every surface and not to price from the floor area.
Built with what exists
An iPhone or iPad Pro with a LiDAR sensor; apps built on Apple's RoomPlan, such as RoomScan Pro or Magicplan; a laser distance meter and tape; a short Python script that applies the P10 rules (openings of 100 square feet or more deducted, smaller ones not) to each scan's exported walls and openings.
First step
Measure and scan one room at home with two apps, and write the P10 counting rules as code.
Done looks like
At least 20 rooms, including some with sloped or vaulted ceilings and some full of furniture, each with scanned and hand-measured paintable area in square feet, published with the error for each room and the median and worst error for each app.
Open 02 · the brief
Bids checked against real hours
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
An open table of finished repaint jobs, each with its measured areas, the estimated labor hours and gallons, and the hours and gallons actually used, so that published rate tables and AI quoting tools can be scored on the same jobs.
Why it is still open
The rates painters price from are averages with no data behind them in public. Resene, a New Zealand paint maker, says its productivity factors are fixed "by the averages of hundreds of painters" and gives no sample or date. PCA's rate tables are in Volume 2 of its Cost and Estimating Guide, which it sells, and it tells contractors to record their own rates. The free US military standards date from 1990, and the AI takeoff sellers report time saved, not error against finished work.
Built with what exists
Estimates, timesheets and paint receipts from consenting contractors, with names and addresses removed; a language model such as Claude to read scanned timesheets and receipts into a fixed table, checked by a person (see the Note "Seven more flagged"); Python and pandas; a CSV file under a CC BY license.
First step
Ask one painting contractor for the estimates and timesheets of five finished jobs, remove names and addresses, and enter them into the table.
Done looks like
At least 50 finished jobs from at least five contractors, each with estimated and actual labor hours and gallons, and a published comparison of the actual hours with the hours given by Resene's factors, the 1990 military standards and each contractor's own bid.