Industries / Mining and materials / Packaging
Glass and metal containers
Glass and metal containers are the cans, jars, bottles and aerosol cans that hold food, drink and household goods, with the lids, tabs and caps that close them.
7
Milestones achieved, from 1813 to 2024.
1
To watch for: announced, not yet confirmed outside.
2
Open deliverables. Nobody has shipped them.
The road
AchievedWatch forOpen
Achieved
1813
Canned rations for the navy
Bryan Donkin and his brother-in-law John Hall bought Peter Durand's 1810 patent for preserving food, which the Linda Hall Library describes as a patent for "tin-coated iron cans". They set up a canning factory in 1812, and by 1813 were supplying canned food to the British army and navy, by the library's account. There was no can opener yet, so the cans were opened with a hammer and chisel.
Credit
Bryan Donkin and John Hall
1858
Jars get a screw neck
John L. Mason of New York was granted US patent 22,186 on 30 November 1858 for a glass jar or bottle with a screw thread on the outside of its neck. The thread stops short of the rim and of the shoulder, and the groove left below it gives a cap's rubber washer a place to seat tightly, so a screw cap can close the jar airtight.
Credit
John L. Mason
1935
Beer goes into cans
On 24 January 1935 the Gottfried Krueger Brewing Company put 2,000 cans of Krueger's Finest Beer and Krueger's Cream Ale on sale in Richmond, Virginia, in cans made by the American Can Company. American Can had tried a beer can in 1909 and failed. Its 1933 design held the pressure and had an inner coating that kept the beer from reacting with the tin. By HISTORY.com's account, 91% of drinkers approved, and more than 200 million cans had been made and sold by the end of 1935; Food Processing's can timeline also calls Krueger the first company to sell beer in cans.
LessonA container has to suit what goes in it, and beer could go into tinplate only once a lining kept it off the metal.
Credit
Gottfried Krueger Brewing Company and American Can Company
1975
The tab stays on
Ring-pull can ends, test-marketed by Iron City Beer in 1962, came away in the drinker's hand. Daniel F. Cudzik of Reynolds Metals filed a patent on 24 November 1975 for an end whose tab pushes a panel into the can and stays attached. The patent says a pulled-off strip and tab "may be carelessly discarded with undesirable consequences, such as litter and a hazard to bare feet," and that metal left on the can is more readily collected and recycled. Food Processing's timeline dates the first non-detachable ends to 1975.
LessonEvery loose tab became litter, so the fix was to design the waste out of the opening itself.
Credit
Daniel F. Cudzik and Reynolds Metals (US patent 3,967,752, granted 6 July 1976)
1978
Fluorocarbon sprays banned
In March 1978 the US Food and Drug Administration (FDA), the Environmental Protection Agency (EPA) and the Consumer Product Safety Commission (CPSC) ordered a phaseout of chlorofluorocarbons (CFCs), the fluorocarbon gases used to propel spray products, in nonessential aerosols such as deodorants, hair sprays, household cleaners and pesticides. Studies by the National Academy of Sciences and others had concluded that the gases could seriously damage the ozone layer. Bulk makers had to stop producing them for most aerosols by 15 October 1978, and spray makers had to stop making fluorocarbon sprays by 15 December 1978; some inhaled medicines and other essential sprays were exempt. By EPA's count, fluorocarbons released from aerosols had already fallen from 511 million pounds in 1973 to about 300 million pounds in 1977, as many makers switched to other propellants or to pumps.
LessonA propellant chosen because it seemed harmless damaged the upper atmosphere, so what a container releases has to be judged after it leaves the can.
Credit
FDA, EPA and CPSC
2010
Lighter wine bottles
GlassRite Wine, a four-year UK project run by WRAP (the Waste and Resources Action Programme, a government-funded body), ended in March 2010. One of its initiatives was a 300 g screw-cap wine bottle made with Quinn Glass. WRAP said the project's changes cut total bottle weight by 27,048 tonnes and saved 35,000 tonnes of CO2 a year, and that at least 10% of the glass in UK wine bottles could still be cut.
LessonA lighter bottle that works does not spread on its own; Verallia, citing figures from FEVE (the European container glass federation) for 2023, puts the average European 750 ml wine bottle at 450 g.
Credit
WRAP and Quinn Glass
2024
A can of 6.1 grams
Toyo Seikan cut the aluminum in its 190 ml stay-on-tab can from 7.0 g to 6.1 g, about 13% less, by strengthening the can bottom with a forming step it calls compression bottom reform (CBR). Coca-Cola's 185 g Georgia canned coffee in Japan went into the can in 2024. In 2025 the Japan Packaging Technology Association gave Coca-Cola and Toyo Seikan the research and development prize of its 49th Kinoshita Award for what AlCircle's report of the award calls "the world's lightest" can. The weights are Toyo Seikan's own measurements.
Credit
Toyo Seikan and Coca-Cola
Watch for
Reusable bottles of strengthened glass
Vetropack makes returnable beer bottles of thermally strengthened glass, heat-treated to make it more durable and harder to scuff. It says the 0.33 liter bottles are up to 30% lighter than standard returnable bottles and that after 60 use cycles they are still "significantly more stable" than conventional ones. Brau Union uses them as a standard bottle in Austria. The bottles have been sold under the name Rezon since September 2025 and are made only at Pöchlarn, Austria, where an industrial-scale machine is being installed.
Achieved whenthe industrial-scale line is running and someone outside Vetropack, such as a brewer or a test laboratory, publishes breakage and strength figures for bottles after many trips, compared with standard returnables.
Claimed by
Vetropack, September 2025
Open
01
Public answer key for seams
A public set of can double seams (the rolled, folded joint that holds a can's lid to its body), each cut open and measured three ways: with a seam micrometer, with a commercial camera seam projector, and from a photo taken with a phone and a clip-on macro lens. Publish the images, the measurements and a script that measures seams from phone photos, so that any tool, bought or home-made, can be scored against the same seams.
The briefCredit · unclaimed02
Breakage ledger for light bottles
A public log, kept run by run on real bottling lines, of how many lightweight (about 300 g) and standard wine bottles break or jam per 100,000 filled, so that claims that light bottles run as well as heavy ones can be checked.
The briefCredit · unclaimed
Open 01 · the brief
Public answer key for seams
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A public set of can double seams (the rolled, folded joint that holds a can's lid to its body), each cut open and measured three ways: with a seam micrometer, with a commercial camera seam projector, and from a photo taken with a phone and a clip-on macro lens. Publish the images, the measurements and a script that measures seams from phone photos, so that any tool, bought or home-made, can be scored against the same seams.
Why it is still open
US rules for low-acid canned food call for visual seam checks at intervals of no more than 30 minutes and teardown examinations, in which a qualified person cuts seams apart and measures them by micrometer or seam projector, at intervals of no more than 4 hours. Vendors sell camera projectors that measure a cut seam in about a second (AT2E's SeamCheck Plus) and software that judges seam tightness from images (OneVision), but none publishes a shared set of test seams. Searches of Hugging Face, arXiv, Crossref and GitHub in November 2026 found no public set of seam images with measurements; the only GitHub match is a calculator that takes micrometer readings as input.
law.cornell.eduat2e.comonevision-corporation.squarespace.comgithub.com
Built with what exists
A seam saw or fine hacksaw, a seam micrometer, a phone with a clip-on macro lens and a printed calibration scale, image measurement in Python with OpenCV, and labeling in CVAT or Label Studio.
First step
Empty a case of canned sparkling water, cut ten seams, and compare micrometer readings with readings taken from phone photos of the same cuts.
Done looks like
At least 300 seams from three or more can sizes, each measured by micrometer by two people, released under an open license with the images, and for the phone method the mean difference from the micrometer and the share of readings within 0.001 inch (0.025 mm) for body hook, cover hook, seam thickness and overlap.
Open 02 · the brief
Breakage ledger for light bottles
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A public log, kept run by run on real bottling lines, of how many lightweight (about 300 g) and standard wine bottles break or jam per 100,000 filled, so that claims that light bottles run as well as heavy ones can be checked.
Why it is still open
WRAP's 2006 Container Lite report lists more breakage on production lines and in transport among the industry's worries about lighter glass, but judges its filling-line trials only on whether the new bottles fit the line's size tolerances. Reports of WRAP's GlassRite results give tonnes of glass and CO2 saved but no breakage figures. Vetropack said in June 2026 that bottlers' line trials of its 350 g wine bottle found it ran without slowing the line, and gave no breakage rates. FEVE's 2023 figures, as cited by Verallia, put the average European wine bottle at 450 g, so most fillers still choose heavier glass.
glass-ts.combeveragedaily.comfoodanddrinktechnology.comglassonline.com
Built with what exists
A tablet form for line staff, a camera at the reject point with an open detector such as Ultralytics YOLO to count broken bottles from video, and a shared spreadsheet or a Hugging Face dataset for the results.
First step
Ask a mobile bottling service that fills for small wineries to record broken bottles and bottle weight for every run for one month.
Done looks like
At least one million bottles of each weight class logged across 50 or more runs at three or more bottling sites, published with breakage per 100,000 bottles and a confidence interval for each class.