Industries / Mining and materials / Packaging
Plastic and film
Plastic and film is making the thin, flexible plastics that wrap, bag, pouch and cushion goods, including films bonded from several materials to keep food fresh.
6
Milestones achieved, from 1927 to 2022.
2
To watch for: announced, not yet confirmed outside.
2
Open deliverables. Nobody has shipped them.
The road
AchievedWatch forOpen
Achieved
1927
Cellophane keeps out moisture
Jacques Brandenberger, a Swiss chemist working for a French textile firm, invented cellophane, a clear film recast from dissolved cellulose (plant fiber), in 1908, and by 1912 had a process for making it. DuPont acquired the US rights in 1923 and opened a plant in Buffalo, New York, in April 1924, but the film let water vapor through, so cakes, crackers and cigars wrapped in it dried out. William Hale Charch found a coating of nitrocellulose, wax, a plasticizer and a blending agent after some 2,000 failed attempts, and a patent for the moistureproofing was issued in 1927. DuPont stopped making cellophane in 1986, by the Hagley Museum's account.
LessonA film can look right and still fail as packaging, because keeping out water vapor and gases is part of the job.
Credit
Jacques Brandenberger; William Hale Charch and DuPont
1961
Failed wallpaper becomes Bubble Wrap
In 1957 Alfred Fielding and Marc Chavannes, a Swiss chemist, ran two plastic shower curtains through a heat-sealing machine while trying to make textured wallpaper, and got a sheet with trapped air bubbles. The wallpaper failed, and so did a trial as greenhouse insulation. They founded Sealed Air Corp. in 1960, and the next year turned the film to packaging, when IBM needed to protect its new 1401 computer in transit, by Smithsonian magazine's account.
LessonThe same film failed in two uses before shippers of fragile goods became its market.
Credit
Alfred Fielding and Marc Chavannes, Sealed Air
1965
A one-piece carrier bag
Sten Gustaf Thulin of the Swedish company Celloplast patented a bag with handles made from a flattened tube of plastic film, which has no side seams to glue. The tube is welded across at intervals of one bag length, and material is punched out so that the handles are formed from the welded part, with no sewing or gluing. US patent 3,180,557 was granted on 27 April 1965, with a priority date of 10 July 1962.
Credit
Sten Gustaf Thulin, Celloplast AB
2002
Ireland charges for bags
In March 2002 Ireland put a levy of 15 euro cents on plastic shopping bags, which shops had handed out free. Frank Convery, Simon McDonnell and Susana Ferreira estimated in 2007 that bag use in shops fell by about 90%, and that running the levy cost about 3% of what it raised, because it was collected through the existing value-added tax returns. Coastwatch Ireland's beach surveys counted a mean of 17.7 bags per 500 m of beach in 2000 and 5.5 in 2002, as reported by the EU-funded MARLISCO project.
LessonA small charge that shoppers see at the till cut use sharply, and collecting it through an existing tax kept its running cost low.
Credit
Ireland's Department of the Environment, Heritage and Local Government
2016
Counting plastic packaging losses
A report by the World Economic Forum and the Ellen MacArthur Foundation, with analysis by McKinsey & Company, estimated that only 14% of plastic packaging worldwide was collected for recycling, that 32% escaped collection systems altogether, and that 95% of the material's value, USD 80 to 120 billion a year, was lost after one short use. The report set out a target it called the "New Plastics Economy". From 2018 the foundation, with the UN Environment Programme, gathered companies and governments behind a Global Commitment to that vision.
content.ellenmacarthurfoundation.orgellenmacarthurfoundation.org
Credit
Ellen MacArthur Foundation, World Economic Forum and McKinsey & Company
2022
Compostable packs fail at home
In the Big Compost Experiment, researchers at University College London enrolled 9,701 people across the UK, and 1,648 of them tested compostable and biodegradable plastic packaging in their own home compost. Of the items tested, 14% were certified only for industrial composting and 46% had no compostable certification at all. Most items did not fully break down, including 60% of those certified "home compostable", and the team concluded that home composting is not an effective way to deal with this packaging in the UK.
LessonA certificate earned under test conditions did not predict what happened in real garden compost, and shoppers could not tell the labels apart.
Credit
Purkiss, Allison, Lorencatto, Michie and Miodownik, UCL Plastic Waste Innovation Hub and UCL Centre for Behaviour Change
Watch for
Supercritical water for film
Mura Technology says its first plant, Mura Wilton at Teesside in northeast England, began operating in 2026 and makes 20,000 tonnes a year of hydrocarbons from mixed flexible and rigid plastic waste. The process uses supercritical water, water held at such high pressure and temperature that it acts as neither liquid nor gas, to break plastics into oils that can feed new plastic production. Packaging Europe reported in October 2023 that first deliveries were expected in early 2024, and in August 2025 Mura and Dow dropped a planned plant at Böhlen in Germany, citing Europe's economic and regulatory conditions.
Achieved whensomeone outside Mura, such as a regulator, auditor or buyer, publishes a full year's tonnes of post-consumer film taken in and product shipped.
Claimed by
Mura Technology, September 2026
PEF plant makes first batch
PEF (polyethylene furanoate) is a polyester made from FDCA, an acid that Avantium makes from plants. Avantium says it produced the first batch of FDCA at its plant in Delfzijl, the Netherlands, in September 2026, calls the plant the world's first commercial-scale FDCA plant, and expects commercial sales toward the end of 2026 and 12 to 24 months to reach full capacity. Avantium says PEF holds back carbon dioxide and oxygen better than PET, the plastic of most drink bottles, which would give longer shelf life and allow thinner packs.
Achieved whencustomers confirm commercial deliveries, and a laboratory outside Avantium publishes barrier measurements of PEF film or bottles against PET under stated conditions.
Claimed by
Avantium, September 2026
Open
01
Household film scan library
A public library of near-infrared (NIR) spectra, the pattern of infrared light a material reflects, from household flexible packs such as crisp bags, coffee pouches and cheese wraps. Label each pack as mono-material (one plastic family, which film recyclers can take) or multilayer (bonded layers of different plastics, foil or paper), confirm the label in a lab, and publish a baseline classifier that runs on a handheld scanner.
The briefCredit · unclaimed02
Barrier test of recyclable pouches
An independent, published test of the recyclable mono-material polyethylene (PE) pouches sold to replace laminated pouches, measured side by side with the laminates they replace. Measure oxygen transmission rate (OTR, the volume of oxygen that passes through a square meter of film in a day), water vapor transmission and seal strength, on bought samples, at both dry and humid conditions.
The briefCredit · unclaimed
Open 01 · the brief
Household film scan library
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A public library of near-infrared (NIR) spectra, the pattern of infrared light a material reflects, from household flexible packs such as crisp bags, coffee pouches and cheese wraps. Label each pack as mono-material (one plastic family, which film recyclers can take) or multilayer (bonded layers of different plastics, foil or paper), confirm the label in a lab, and publish a baseline classifier that runs on a handheld scanner.
Why it is still open
Researchers at RWTH Aachen (Chen, Kroell, Wickel and Feil, Waste Management, March 2021) showed that NIR can classify post-consumer multilayer packs with over 96% object-based accuracy, using laboratory and sorting-plant equipment, and the EU-funded CIMPA project described two automated sorting solutions for multilayer films in March 2024. CEFLEX, the European flexible packaging consortium, had about 240 samples tested under NIR sorting conditions for its D4ACE design guidelines, reported in January 2026 as guidance rather than spectra. A German field study of household packaging collected in 2019 (Schmidt and colleagues, Polymers, 2022) characterized multilayer packs by infrared and microscope, but says its data "cannot yet be provided". Searches of Hugging Face, Zenodo and GitHub in November 2026 found no public, labeled spectra of household flexible packs; the nearest public set, NIR-MFCO (2023), holds false-color images of rigid HDPE and PET packs and drink cartons.
ebi.ac.ukplasticsengineering.orgebi.ac.ukzenodo.orgzenodo.org
Built with what exists
A handheld NIR spectrometer such as Si-Ware's NeoSpectra Scanner or trinamiX's mobile NIR spectrometer; reference spectra of both faces by ATR-FTIR (an infrared method that reads a surface pressed against a crystal) and cross-sections under a microscope, from a university or commercial testing lab; a classifier in Python with scikit-learn or PyTorch.
First step
Save one week of household flexible packaging, clean and flatten 100 pieces, scan both faces with a borrowed handheld NIR unit, and send 20 of them to a lab for cross-sections.
Done looks like
At least 1,500 packs from three countries, each with spectra from both faces and a lab-confirmed structure, released under an open license, and the baseline's accuracy at telling mono-material from multilayer reported on packs from a country held out of training, next to the 96% that Chen and colleagues reached with plant equipment.
Open 02 · the brief
Barrier test of recyclable pouches
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
An independent, published test of the recyclable mono-material polyethylene (PE) pouches sold to replace laminated pouches, measured side by side with the laminates they replace. Measure oxygen transmission rate (OTR, the volume of oxygen that passes through a square meter of film in a day), water vapor transmission and seal strength, on bought samples, at both dry and humid conditions.
Why it is still open
Barrier figures for recyclable pouches come from the companies that sell them. A pouch developed by ExxonMobil, Henkel, Kraus Folie, Siegwerk and Windmöller & Hölscher reports an OTR of 0.58 cm³/m²/day, measured by Henkel's own test method at 23 °C and 0% relative humidity. Sustainable Packaging News wrote in July 2026 that industry validation of recyclable high-barrier structures under real-world conditions "becomes increasingly important". A search in November 2026 found no independent head-to-head test.
Built with what exists
Optical oxygen sensor spots read through the film with a fiber-optic meter, such as those made by PreSens; nitrogen-flushed, sealed pouches stored at 23 °C in boxes held at about 50% and 75% relative humidity with saturated salt solutions; a tensile tester for seal strength by ASTM F88; and a commercial lab running OTR tests by ASTM D3985 or F1927 on a subset, to check the spot method.
First step
Buy pouches from three brands that have switched to recyclable PE packs, plus their older laminated versions if still on sale, and ask two OTR testing labs for quotes.
Done looks like
Ten commercial recyclable pouches and the laminates they replace, five samples of each at two humidities for 60 days, with oxygen ingress, seal strength and lab OTR checks published with the raw data and set against each maker's datasheet figure.