BRENNEN

Industries / Energy, water and waste / Oil and gas extraction

Well control and spills

Well control is keeping underground pressure inside the well at all times, and, when that fails, stopping the flow and dealing with the oil that escapes.

5

Milestones achieved, from 1922 to 2012.

1

To watch for: announced, not yet confirmed outside.

2

Open deliverables. Nobody has shipped them.

The road

AchievedWatch forOpen

Achieved

  1. 1922

    The blowout preventer

    James Abercrombie and Harry Cameron built the first ram-type blowout preventer in 1922: heavy steel rams that close across the well to seal it against pressure. It was rated to 3,000 psi, a record at the time, and went on sale in January 1924. ASME lists it as engineering landmark no. 227.

    asme.org

    Credit

    James Abercrombie, Harry Cameron

  2. 1934

    Killing a well sideways

    A well at Conroe, Texas, blew out and caught fire in January 1933 and collapsed into a crater that swallowed nearby rigs. Humble Oil hired John Eastman, who began a slanted relief well on 12 November 1933; it reached its target on 7 January 1934, and water pumped into it stopped the flow two days later. A relief well is a second well drilled to meet the first underground so it can be plugged.

    aoghs.org

    Credit

    H. John Eastman; Humble Oil

  3. 1979

    Ixtoc I runs wild

    Pemex's Ixtoc I well in the Bay of Campeche, Mexico, blew out on 3 June 1979 in about 50 m of water. It spilled 10,000 to 30,000 barrels a day until it was capped on 23 March 1980, after two relief wells were drilled, according to NOAA.

    Lessononce control is lost, even a shallow-water well can flow for months.

    incidentnews.noaa.gov

    Credit

    Pemex (operator); NOAA (record)

  4. 2010

    Macondo's preventer fails

    On 20 April 2010 the Macondo well blew out under the Deepwater Horizon rig in the Gulf of Mexico; 11 workers died and the well flowed for 87 days. The US Chemical Safety Board found the drill pipe buckled in the first minutes, so the blowout preventer's blind shear ram punctured it instead of sealing it, and found miswiring and failed backup batteries in the ram's controls. A federal judge found 3.19 million barrels reached the Gulf; the US government had estimated 4.2 million and BP 2.4 million.

    Lessonsafety equipment must be tested under the conditions in which it will be used.

    csb.govbizneworleans.com

    Credit

    US Chemical Safety Board; Judge Carl Barbier

  5. 2012

    A capping stack on standby

    After Macondo, US Gulf of Mexico operators formed the Marine Well Containment Company in March 2011. Its interim capping stack, a device lowered onto a leaking well to shut it in, is rated for 15,000 psi and 10,000 feet of water; in July 2012 it was latched onto a simulated wellhead at 6,900 feet in a drill ordered by BSEE, and pressure tests showed it could control the well.

    offshore-mag.com

    Credit

    Marine Well Containment Company and its ten founding members

Watch for

  1. Kick warning from many signals

    A kick is an unplanned flow of gas, oil or water from the rock into the well; caught early it is routine, missed it can become a blowout. Louisiana State University, Blade Energy Partners and Intellicess combined three detection methods, including fibre-optic sensing, and report that the combined system caught every gas kick in their tests with fewer false alarms than any single method. The tests used a 5,163-ft university test well and a simulator, not a working rig.

    Achieved whenthe system is tested on working rigs and the results are confirmed by an operator or regulator outside the team.

    ogj.com

    Claimed by

    the study authors, SPE Journal, January 2026 (reported March 2026)

Open

  1. 01

    An open blowout record

    A public table of blowouts and well releases built from published investigation reports, recording what happened, which barriers failed and what was learned, each entry linked to its source pages.

    The brief
    Credit · unclaimed
  2. 02

    Kick alarms on real data

    A test that takes kick detectors trained on simulated data and scores them on real recorded kicks and flow checks (stopping the pumps to see whether the well flows on its own).

    The brief
    Credit · unclaimed

Open 01 · the brief

An open blowout record

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A public table of blowouts and well releases built from published investigation reports, recording what happened, which barriers failed and what was learned, each entry linked to its source pages.

Why it is still open

The main industry record, SINTEF's Offshore Blowout Database, holds 711 offshore blowouts and well releases worldwide since 1955, but it is "confidential and only accessible for the project sponsors."

sintef.no

Built with what exists

Published reports from BSEE, the US Chemical Safety Board, NOAA and national regulators; a language model that drafts entries with citations; two human checkers.

  1. First step

    List every well-control incident among BSEE's panel investigation reports and code 10 by hand.

  2. Done looks like

    At least 100 events, each with at least one public source link, with barrier-failure codes checked by two people and their agreement reported, published under an open licence.

Open 02 · the brief

Kick alarms on real data

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A test that takes kick detectors trained on simulated data and scores them on real recorded kicks and flow checks (stopping the pumps to see whether the well flows on its own).

Why it is still open

The authors of DataDRILL, a public simulated kick dataset, write that "the current literature does not make supporting datasets publicly available" for drilling rigs. Oil & Gas Journal reports that new kick detection technologies have not been field-proven.

arxiv.orgogj.com

Built with what exists

DataDRILL for training; Volve's real-time drilling data and daily reports to find real events; Petrobras's 3W dataset of labelled well problems as a model for mixing real and simulated cases; Python.

github.com

  1. First step

    Search Volve's daily drilling reports for kicks, flow checks and influxes, and count how many real events exist.

  2. Done looks like

    A public benchmark with at least 20 real kick or flow-check events, scoring at least three detectors on minutes from influx to alarm and false alarms per 24 hours of drilling.