BRENNEN

Industries / Mining and materials / Mining and quarrying

Drilling and blasting

Drilling and blasting breaks solid rock into pieces small enough to dig, by filling drilled holes with explosive.

4

Milestones achieved, from 1627 to 2021.

1

To watch for: announced, not yet confirmed outside.

1

Open deliverables. Nobody has shipped them.

The road

AchievedWatch forOpen

Achieved

  1. 1627

    Gunpowder in the mine

    On 8 February 1627 Kaspar Weindl, a miner from Tyrol, introduced blasting with gunpowder in the Oberbiberstollen tunnel at Schemnitz, now Banská Štiavnica in Slovakia. This date is often cited as the first use of gunpowder in mining. Sources disagree: the historian Karl-Heinz Ludwig wrote in 1986 that Italian records, studied by the Padua historian Vergani, show gunpowder blasting in the Venetian mining district of Schio in 1574 or even 1573.

    LessonLudwig notes the 1627 date was accepted as the first without further checking, so a repeated "first" still needs its sources read.

    bergbaumuseum.de

    Credit

    Kaspar Weindl at Schemnitz; miners of the Schio district

  2. 1867

    Dynamite

    Alfred Nobel found that mixing liquid nitroglycerine with kieselguhr, a fine sand, made a paste that could be shaped into rods and pushed into drill holes. He made the invention in 1866, patented it in 1867 and also invented a blasting cap to set it off. The US Institute of Makers of Explosives says dynamite let mines be dug "safer, deeper, faster".

    nobelprize.orgime.org

    Credit

    Alfred Nobel

  3. 1950s

    Ammonium nitrate blasting

    By the 1950s the commercial explosives industry began to shift to products based on ammonium nitrate, a fertiliser chemical. Ammonium nitrate is not itself an explosive but an oxidiser, and mixed with fuel oil it becomes the blasting agent ANFO. The Institute of Makers of Explosives says more than 80% of explosives used in the United States today are ammonium nitrate based.

    ime.org

    Credit

    The commercial explosives industry; the source names no single inventor

  4. 2021

    Wireless blasting in production

    Resolute Mining began production blasting at its Syama gold mine in Mali with Orica's WebGen system, which sends firing commands through hundreds of metres of rock, air and water. No wires run from the charges to the surface, so no one has to re-enter high-risk areas to connect them. Orica calls WebGen the world's first fully wireless initiating system.

    amsj.com.au

    Credit

    Orica (system); Resolute Mining (first production use reported here)

Watch for

  1. Cutting hard rock, no blasting

    Komatsu says its MC51, an electric, remote-controlled machine, cuts hard rock with its DynaCut undercutting method instead of explosives. Komatsu says trials showed consistent advance rates, and that the machine cuts a tunnel of nominally 5 m by 5 m to an accuracy of about 20 mm.

    Achieved whena mine reports the MC51 in routine tunnelling, with advance rates and costs measured by the mine or an independent party.

    miningweekly.com

    Claimed by

    Komatsu, April 2026

Open

  1. 01

    Rock piles of known size

    A public set of photos and 3D scans of rock piles whose size distribution is known in advance, so fragmentation software can be scored against a true answer. Fragmentation software estimates the sizes of broken rock from images after a blast.

    The brief
    Credit · unclaimed

Open 01 · the brief

Rock piles of known size

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A public set of photos and 3D scans of rock piles whose size distribution is known in advance, so fragmentation software can be scored against a true answer. Fragmentation software estimates the sizes of broken rock from images after a blast.

Why it is still open

Sieving, which passes rock through meshes of set sizes, is accurate but slow and costly, so image tools are rarely checked against it. A 2021 study by Bamford and colleagues notes that earlier deep-learning methods were compared with sieving on only 2 and 8 samples, and that fine particles remain a major source of error.

dynsyslab.org

Built with what exists

Graded crushed rock bought from a quarry or building supplier; a sieve shaker and scales; a phone or digital camera; a drone for overhead shots; photogrammetry software such as OpenDroneMap or Agisoft Metashape; image segmentation models such as Meta's Segment Anything.

  1. First step

    Buy 1 t of graded aggregate, mix two piles from weighed size fractions, photograph and scan them, and publish the method.

  2. Done looks like

    50 piles of 1 to 5 t each, built from weighed size fractions so their size curves are known, with images and scans published under an open licence. For at least three tools, the error in median size (x50), the size 80% of the rock passes (x80) and the share of fines is reported.