BRENNEN

Industries / Health

Medical devices

The medical device industry designs, makes and wins approval for the products other than medicines that are used in care, from implants and surgical tools to monitors, imaging machines, lab tests and the software that runs them.

1896

Months after Wilhelm Röntgen reported X-rays, the instrument maker Reiniger, Gebbert & Schall of Erlangen, Germany, a forerunner of Siemens Healthineers, was making X-ray tubes designed for medical use, and Röntgen himself wrote to order two. In 1897 the firm advertised them in what Siemens Healthineers calls the world's first catalog of X-ray equipment, and by 1898 it employed three times as many people as before the discovery.

medmuseum.siemens-healthineers.com

39

Milestones achieved across 6 domains.

8

To watch for: announced, not yet confirmed outside.

12

Open deliverables. Nobody has shipped them.

In one minute

Where it started

Devices became a factory product in 1896, when instrument makers in Germany turned the newly found X-rays into tubes and machines sold to doctors. Electronics then made implants possible: in 1957 Earl Bakken built a battery pacemaker from transistors in four weeks. Rules came after harm. The US began reviewing devices before sale in 1976, after the Dalkon Shield contraceptive injured women, and the EU set one rulebook for devices in 1993.

Where it stands

MedTech Europe, the European trade body, estimates the European market at about €173 billion in 2025, a quarter of the world's, behind the US at 46%. Rules are moving closer together: since 2 February 2026 US factory rules follow ISO 13485, the international quality standard, and in May 2026 the EU made the first four parts of its device database mandatory. Software is now a large part of the trade, and the FDA's list of AI-enabled devices it has authorized had 1,614 entries in September 2026.

What is open

Many open jobs here are checks on public records: which tests stand behind each US clearance, how early adverse-event reports could have warned of each serious recall, and how device plastics change under each sterilization method. AI models that read long PDFs and quote their sources make these jobs possible for a small team. Others are bench work that never touches a person, such as a low-cost robot arm that learns to join tubing and a machine-checked proof that open-source insulin-dosing code keeps to its limits.

Domains

AchievedWatch forOpen

Figureheads

1 person

Advances to build with

4 research notes

Open in medical devices

3 of 12 open deliverables

Open · Design and prototyping

Planted errors in design files

A complete, public design file for a simple device that never touches a person, such as a bench pump that moves only water, with user needs, requirements, a risk analysis, drawings, verification tests and their results, all linked to one another. Then a second copy with 50 planted errors of known kinds (a requirement with no test, a test that checks the wrong limit, a hazard with no control, a drawing at the wrong revision), kept as an answer key for scoring AI reviewers and people.

Built with what exists

the open pain-pump requirements as a starting point; OpenRegulatory's templates for ISO 14971 risk files and ISO 13485 records; a syringe-pump prototype built from off-the-shelf parts and run only with water; Git to version every document; Claude and Gemini as reviewers, set to cite the requirement or clause behind each finding, as the code reviewer in the Note "Findings that cite notes" does, and run five times each, because one run can miss what another catches.

Credit · unclaimed

Open · Materials and sterilization

An open sterilization damage table

A public, machine-readable table of how device plastics, rubbers and adhesives change after each sterilization method (steam, EtO, gamma rays, electron beam, vaporized hydrogen peroxide): material grade, method, dose or cycle, property measured, change in percent, and the paper, table and page it came from.

Built with what exists

the Europe PMC and OpenAlex APIs to find papers; Claude or Gemini to pull tables from PDFs into a fixed format with page citations, an advance that turns weeks of hand copying into checking; two people to check samples; DuckDB and a public repository such as GitHub or Zenodo; for spot checks, standard plastic test bars sent through a contract sterilizer and pulled on a university tensile tester.

Credit · unclaimed

Open · Manufacturing

Teach a robot tubing joints

A low-cost robot arm that joins plastic medical tubing to a connector: it picks up a cut length of tube, pushes it onto the connector, applies a UV-curing adhesive and cures it under a lamp. It learns the job from recorded demonstrations. The joints are test pieces only and are never used on anyone.

Built with what exists

Hugging Face's LeRobot library and its low-cost SO-101 arm; open robot policies such as ACT or SmolVLA, or NVIDIA's GR00T models, which learn a task from a few dozen demonstrations (see the Note "Five demonstrations per task", the Note "No download" and the Note "A real production line"); PVC tubing and plastic luer connectors bought as parts; a UV lamp; a digital force gauge on a manual test stand.

Credit · unclaimed