BRENNEN

Industries / Transport and vehicles / Maritime and shipping

Fuel and emissions

Shipowners, fuel suppliers and regulators decide what ships burn and set limits on what they may release into the sea and the air: oil, sulfur, nitrogen oxides and carbon dioxide.

7

Milestones achieved, from 1973 to 2024.

2

To watch for: announced, not yet confirmed outside.

2

Open deliverables. Nobody has shipped them.

The road

AchievedWatch forOpen

Achieved

  1. 1973

    Torrey Canyon leads to MARPOL

    IMO, the UN agency for shipping, says the Torrey Canyon disaster of 1967, which spilled 120,000 metric tons of oil, "demonstrated the scale of the problem." On 2 November 1973 IMO adopted MARPOL, the International Convention for the Prevention of Pollution from Ships. It covers routine discharges such as tank cleaning as well as accidents, and later grew to six annexes: oil, noxious liquids, packaged harmful goods, sewage, garbage and air pollution. A 1978 Protocol followed "a spate of tanker accidents in 1976-1977," and the combined treaty came into force on 2 October 1983. ITOPF, which keeps tanker spill records, reports that spills over 7 metric tons have fallen by over 90 percent since the 1970s.

    Lessonroutine operations, not only wrecks, needed rules; IMO says it "tackled the environmental threat caused by routine operations such as the cleaning of oil cargo tanks.".

    imo.orgimo.orgitopf.org

    Credit

    IMO and its member states

  2. 1990

    Double hulls after Exxon Valdez

    On 24 March 1989 the tanker Exxon Valdez grounded on Bligh Reef in Prince William Sound, Alaska, and spilled nearly 11 million gallons of crude oil. NOAA reports that the US Congress then passed the Oil Pollution Act of 1990, which required new tankers and tank barges to be built with double hulls (two steel skins with empty space between, so a breach of the outer skin need not release cargo) and set 1 January 2015 as the end date for single-hull tankers in US waters. In 1992 IMO amended MARPOL to require double hulls, or an approved alternative, on tankers of 5,000 dwt or more ordered after 6 July 1993, and after the Erika spill off France in December 1999 it sped up the phase-out of old single-hull tankers.

    Lessona rule for new ships takes years to reach the whole fleet; IMO phased out existing tankers by age partly because "shipyard capacity is limited.".

    response.restoration.noaa.govimo.orgresponse.restoration.noaa.gov

    Credit

    US Congress and IMO

  3. 2005

    Limits on funnel exhaust

    MARPOL Annex VI, added by a 1997 Protocol, came into force on 19 May 2005. It limits sulfur oxides and nitrogen oxides from ship exhaust and lets IMO designate emission control areas (ECAs), sea areas with stricter limits. The first ECAs were the Baltic Sea, the North Sea, the coasts of the US and Canada, and the US Caribbean. A Mediterranean sulfur ECA took effect on 1 May 2025, Canadian Arctic waters and the Norwegian Sea follow on 1 March 2027, and in 2026 IMO adopted a North-East Atlantic ECA that takes effect in 2028.

    imo.orgimo.orgimo.org

    Credit

    IMO's Marine Environment Protection Committee (MEPC)

  4. 2013

    Efficiency built into design

    IMO adopted the Energy Efficiency Design Index (EEDI) in 2011, and it came into force on 1 January 2013. The EEDI rates a new ship's design in grams of carbon dioxide per unit of capacity per mile. New ships had to come in 10 percent below a reference line drawn from ships built in 2000 to 2010, tightening every five years to 30 percent for the covered ship types from 2025; IMO says the rule covers ship types responsible for about 85 percent of the CO2 from international shipping. In June 2021 IMO added the EEXI (the same test for existing ships) and the CII (a yearly carbon-intensity rating from actual operation), both in force from 1 January 2023.

    imo.org

    Credit

    IMO MEPC

  5. 2020

    Low-sulfur fuel worldwide

    From 1 January 2020 IMO capped sulfur in ship fuel at 0.50 percent by mass outside ECAs, down from 3.50 percent; inside ECAs the cap is 0.10 percent. Ships could instead fit scrubbers (exhaust gas cleaning systems), and 2,359 had been reported to IMO by mid-July 2020. Researchers at NASA Goddard and partners (Yuan and others, May 2024) say the rule cut sulfur dioxide from international shipping by about 80 percent; because sulfate from ship exhaust had brightened clouds, they estimate the cut added 0.2 ± 0.11 W/m² of warming (radiative forcing) over the global ocean. A NOAA-led team (Zhang and others, January 2025) estimates 0.074 ± 0.005 W/m² over three cloudy regions crossed by shipping lanes and finds the effect hard to detect against natural cloud variation; the two studies cover different areas.

    Lessoncleaning up ship exhaust also removed some of the cooling that the pollution had been providing.

    imo.orgnature.comnature.com

    Credit

    IMO MEPC

  6. 2023

    Methanol reaches container shipping

    Laura Maersk, a 2,136 TEU feeder ship (a small ship that links smaller ports to big hubs) built by Hyundai Mipo Dockyard in South Korea, was named in Copenhagen on 14 September 2023 and was due to enter a Baltic service in October 2023. Her MAN B&W main engine can burn methanol or conventional fuel. The Maritime Executive notes she "is not the first methanol-fueled ship" but "is the first for the container shipping industry," and that she burns about twice as much methanol by volume as she would oil fuel, because methanol holds less energy.

    maritime-executive.com

    Credit

    A.P. Moller-Maersk and Hyundai Mipo Dockyard

  7. 2024

    Europe prices ship carbon

    Since January 2024 the EU Emissions Trading System, a market in which emitters must hand in one allowance for each ton of CO2, has covered ships of 5,000 gross tonnage (a measure of internal volume) and above calling at EU ports, whatever their flag. It counts all emissions between EU ports and half of those on voyages to or from outside the EU, phased in from 40 percent of 2024 emissions to 100 percent from 2027. From 1 January 2025, FuelEU Maritime also requires the greenhouse gas intensity of energy used on board to fall below the 2020 average by 2 percent in 2025, 6 percent by 2030 and 80 percent by 2050, counted well-to-wake (including emissions from making the fuel).

    climate.ec.europa.eutransport.ec.europa.eu

    Credit

    the European Union

Watch for

  1. A global carbon price vote

    In April 2025 IMO's MEPC approved a draft IMO Net-Zero Framework: ships must cut the yearly greenhouse gas intensity of their fuel, ships above the limits must buy "remedial units," and ships using zero or near-zero fuels can earn rewards. IMO calls it the first framework in the world to combine mandatory emission limits and greenhouse gas pricing across a whole industry sector. An extraordinary session on 14 to 17 October 2025 was meant to adopt it but adjourned for 12 months. MEPC 84 (27 April to 1 May 2026) set up a working group to resolve objections and agreed to resume the session on 4 December 2026, subject to confirmation at MEPC 85.

    Achieved whenparties to MARPOL Annex VI adopt the amendments, they enter into force, and ships report fuel intensity under them.

    imo.orgimo.orgimo.org

    Claimed by

    IMO MEPC, April 2025 (status as of May 2026)

  2. Carbon capture on board

    In Project CAPTURED, run by the Global Centre for Maritime Decarbonisation (GCMD), Evergreen's container ship Ever Top captured CO2 from its exhaust with a system from Shanghai Qiyao Environmental Technology; the pilot finished in China on 25 June 2025. Of 25.44 metric tons of CO2 offloaded, 15.84 metric tons reached Baorong Environmental, which bound it with steel slag into calcium carbonate. GCMD's life-cycle assessment, reported as verified by DNV, found a capture rate of 10.7 percent and a net greenhouse gas cut of 7.9 percent across the chain. In July 2026 the captured CO2 was recognized for compliance under the EU Emissions Trading System.

    Achieved whenships capture CO2 in routine service and a party outside the project reports the tonnage captured and stored over a full year.

    hellenicshippingnews.comcarbonherald.comcyprusshippingnews.com

    Claimed by

    GCMD, September 2025 to July 2026

Open

  1. 01

    Wind savings from public data

    an independent tally of how much fuel wind-assisted cargo ships (ships fitted with rotors, wing sails or suction sails) save in service, using only public data. For each ship, compare its yearly fuel use per nautical mile in the EU's public emission reports before and after the sails were fitted, and against sister ships without sails, correcting for speed and wind along its tracks.

    The brief
    Credit · unclaimed
  2. 02

    Thermal check for shore power

    a way to tell, from a public quay, whether a berthed ship is plugged into shore power or is running its own diesel generators, by photographing its funnel with a thermal camera at set times and matching each photo to the ship's identity from its AIS signal.

    The brief
    Credit · unclaimed

Open 01 · the brief

Wind savings from public data

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

an independent tally of how much fuel wind-assisted cargo ships (ships fitted with rotors, wing sails or suction sails) save in service, using only public data. For each ship, compare its yearly fuel use per nautical mile in the EU's public emission reports before and after the sails were fitted, and against sister ships without sails, correcting for speed and wind along its tracks.

Why it is still open

a March 2026 paper by sail maker Anemoi and Lloyd's Register says owners and suppliers verify savings in different ways, "making it difficult to compare results like-for-like". An EU project launched in June 2026, AWESOME, says that for many shipowners "the main barrier is uncertainty about performance, payback time and operational impact". Searches found single-ship verifications and fleet-wide models, but no comparison across many ships from the public reports.

drybulkmagazine.comswzmaritime.nl

Built with what exists

the EU MRV (monitoring, reporting and verification) emission reports in the European Maritime Safety Agency's THETIS-MRV system, which publishes a verified yearly report for each ship of 5,000 gross tonnage and up that calls at EU ports; makers' and owners' announcements to list which ships carry sails and when they were fitted; the Danish Maritime Authority's free historical AIS (ship-tracking) files for speeds; ERA5 wind data from the Copernicus Climate Data Store; Python with pandas and statsmodels.

emsa.europa.euvbn.aau.dk

  1. First step

    list the wind-assisted ships of 5,000 gross tonnage and up that call at EU ports and download their MRV reports for 2018 to 2025.

  2. Done looks like

    at least 30 wind-assisted ships, each with a full year of reports before and after fitting or a sister ship without sails; a published estimate of the saving for each ship with its uncertainty, set beside the maker's claim for that ship; data and code public.

Open 02 · the brief

Thermal check for shore power

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

a way to tell, from a public quay, whether a berthed ship is plugged into shore power or is running its own diesel generators, by photographing its funnel with a thermal camera at set times and matching each photo to the ship's identity from its AIS signal.

Why it is still open

a DNV study for the campaign group Transport & Environment (July 2025) found that only one in five of the shore-power connections EU ports must offer by 2030 was installed or contracted, across 31 ports; the study says nothing about how use of the connections is checked. Searches found reports on how many berths have shore power, but no independent method for checking whether a given ship is using it.

transportenvironment.org

Built with what exists

a phone thermal camera (for example InfiRay P2 Pro or Teledyne FLIR ONE Edge Pro); an AIS receiver or public AIS feed for ship identity and berthing times; Python to log readings; a port's own shore-power connection records, shared with permission, as ground truth.

  1. First step

    pick a port with a shore-power berth and a public viewpoint, take thermal photos of five berthed ships twice a day for a week, and log each ship's AIS identity.

  2. Done looks like

    200 berth visits observed from public areas at a port with shore power; the funnel readings sort "generators running" from "generators off" in agreement with the port's connection records for at least 95 percent of visits; the method and an anonymized table published.