BRENNEN

Industries / Mining and materials / Chemicals and petrochemicals / Refining / Lubricants

Base oils

Base oils are the refined or synthesized oils that make up most of a finished lubricant, and how they are made decides how the oil flows when cold, how much of it boils off when hot and how long it lasts before breaking down.

7

Milestones achieved, from 1944 to 2013.

1

To watch for: announced, not yet confirmed outside.

2

Open deliverables. Nobody has shipped them.

The road

AchievedWatch forOpen

Achieved

  1. 1944

    Esters for jet engines

    Castor oil was prized as a lubricant but tended to form gum. In Germany, Herman Zorn searched for oils with castor oil's strengths and without the gumming, and several triester and diester oils from his work reached production of 10,000 tons a year by 1944. In the same years W. A. Zisman and his co-workers at the US Naval Research Laboratory independently developed dozens of synthetic ester oils, made by reacting acids with alcohols. Esters became the base of jet engine oils. A 1982 NASA review by William Loomis lists US military specifications for ester turbine oils rated from 177 °C (350 °F) bulk oil temperature for MIL-L-7808 up to 240 °C (464 °F) for MIL-L-27502, and notes that no oil was yet qualified to the hottest of them.

    ntrs.nasa.gov

    Credit

    Herman Zorn; W. A. Zisman and the US Naval Research Laboratory

  2. 1960

    Oil built from olefins

    Polyalphaolefins (PAOs) are base oils built by joining small hydrocarbon molecules called alpha olefins into chains of a chosen length, so the molecules are much alike. William E. Garwood of Socony Mobil filed a patent in 1957, granted in May 1960, for lubricants made by polymerizing alpha olefins. It says they have "low pour point and high V.I." (viscosity index, a number for how little an oil thins as it heats) and need no added pour point depressant or viscosity index improver. STLE's magazine TLT says Socony Mobil researchers invented PAO in 1949, received the process patent in October 1960, and that Mobil claims the first PAO-based synthetic engine oil, sold in 1974. The same column says an earlier synthetic engine oil, National Carbon's Prestone of 1945, was based on polyalkylene glycol and failed because it took up water and caused rusting.

    LessonA base oil must cope with the water that gets into machines, not only with heat and cold.

    patents.google.comstle.org

    Credit

    William E. Garwood and the Socony Mobil research team

  3. 1993

    Wax reshaped, not removed

    Wax molecules, long straight chains, have the highest viscosity index of anything in the oil but turn solid in the cold, so base oil makers must deal with them. Solvent dewaxing chills the oil and filters the wax out. Mobil's catalytic dewaxing, first run at its Adelaide refinery in Australia in 1981 on a ZSM-5 zeolite catalyst, cracks the wax into lighter products. Chevron's Isodewaxing, launched at its Richmond, California, base oil plant in 1993, instead rearranges the wax molecules into branched ones that stay liquid, which raised both the yield of base oil and its viscosity index. Chevron chose to license the process to other refiners; in 2023 it said that more than 75% of refiners adding competitively bid premium base oil capacity since 2010 had chosen its technology.

    exxonmobil.commachinerylubrication.comfuelsandlubes.com

    Credit

    Chevron, at its Richmond lube plant; Mobil for the earlier catalytic dewaxing

  4. 1993

    Base oils sorted into groups

    In 1993 the American Petroleum Institute (API) sorted base stocks into five groups, set out today in Annex E of its engine oil licensing manual, API 1509. Groups I, II and III are mineral oils told apart by saturates (the share of molecules with no double bonds), sulfur and viscosity index. Group I has less than 90% saturates or more than 0.03% sulfur. Group II has at least 90% saturates and no more than 0.03% sulfur. Group III meets the same limits with a viscosity index of 120 or more. Group IV is PAO, and Group V is everything else, including esters. The groups come with rules on when a blender may swap one maker's base oil for another's without repeating engine tests. A General Motors chemist recalled that Group II oils later let ILSAC's GF-3 oil standard cut allowed volatility, the share of oil that boils off when hot, from 22% to 15% in the Noack test; by 2020 Lubes'n'Greases put Group II at 40% of the world's base oil production capacity.

    apidam.widen.netexxonmobil.com

    Credit

    American Petroleum Institute

  5. 1999

    Synthetic stretched to Group III

    Mobil objected that Castrol's Syntec, made from a hydroprocessed mineral base oil, was not a synthetic motor oil, although Mobil had itself reportedly sold Group III oils as synthetic outside the US. The National Advertising Division of the US Council of Better Business Bureaus ruled that Castrol had a reasonable basis to call the product synthetic, though not to call it superior. Chevron's own account says the ruling "allows Group III base oils to be considered synthetic". No API or US government rule defines a synthetic oil, and a 2022 trade article notes that an oil sold as synthetic whose label does not name PAO is generally a Group III oil.

    LessonOnce a label follows performance and not how an oil is made, the label alone no longer tells the buyer what is in the bottle.

    stle.orgmachinerylubrication.commotor.com

    Credit

    the National Advertising Division, ruling on Mobil's challenge

  6. 2011

    Base oil from natural gas

    Gas-to-liquids (GTL) plants turn natural gas into liquid hydrocarbons that can be processed into fuels and base oils. The first shipment of Group III base oil from the Pearl GTL plant in Qatar, run by Shell and Qatar Petroleum, reached the Port of Houston in November 2011, to be blended into Shell's motor oils. Shell put the plant's base oil output at about 30,000 barrels a day once at full capacity.

    hydrocarbonprocessing.com

    Credit

    Shell and Qatar Petroleum

  7. 2013

    Biodegradable oils required at sea

    Ships leak lubricant where moving parts meet seawater, such as the stern tube, the housing where the propeller shaft leaves the hull. A 2010 study cited by the US Environmental Protection Agency (EPA) estimated that operational leaks and discharges, stern tubes included, put 36.9 to 61 million liters of lubricating oil into the sea each year. From 19 December 2013 EPA's Vessel General Permit required vessels to use an environmentally acceptable lubricant (EAL) in all oil-to-sea interfaces unless technically infeasible. An EAL must be biodegradable, minimally toxic and not bioaccumulative; for an oil, at least 90% by weight (75% for a grease) must be ingredients that each pass a laboratory test such as OECD 301B, for example by giving off at least 60% of their theoretical carbon dioxide within 28 days. EPA's 2011 report names vegetable oils, synthetic esters and polyalkylene glycols as the main EAL base oils, and says lubricants are about 75 to 90 percent base oil.

    epa.gov19january2021snapshot.epa.gov

    Credit

    US Environmental Protection Agency

Watch for

  1. Group III from Baytown

    ExxonMobil said in August 2025 that it will offer Group III base stocks of 4 and 6 cSt (centistokes, a unit of viscosity) from its plant in Baytown, Texas, and that an upgrade will give it 8,000 barrels a day of Group III capacity there in 2028; it did not give the cost or say how much it makes now.

    Achieved whensomeone outside the company, such as a price reporting agency or a trade survey of plant capacity, reports the Baytown plant selling these grades at the stated rate.

    lubesngreases.com

    Claimed by

    ExxonMobil, August 2025

Open

  1. 01

    What base oil is inside

    An open method and a public survey that identify the main base oil (PAO, Group III, GTL or a blend) in finished motor oils sold as "full synthetic". Strip the additives from each oil with a silica gel column, run the base oil through gas chromatography with mass spectrometry (GC-MS), compare the trace with a reference library of known base oils, and let a small classifier name the type. Publish the traces and the results by product, with purchase date and lot code.

    The brief
    Credit · unclaimed
  2. 02

    Biodegradable labels, retested

    An independent retest of marine lubricants sold as environmentally acceptable under the Vessel General Permit. Buy stern tube oils, hydraulic oils and greases off the shelf, have accredited contract laboratories run both OECD 301B and the lubricant-specific test CEC-L-103-12 on the same lots, and publish how each product scores against its own data sheet and against the permit's definition.

    The brief
    Credit · unclaimed

Open 01 · the brief

What base oil is inside

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

An open method and a public survey that identify the main base oil (PAO, Group III, GTL or a blend) in finished motor oils sold as "full synthetic". Strip the additives from each oil with a silica gel column, run the base oil through gas chromatography with mass spectrometry (GC-MS), compare the trace with a reference library of known base oils, and let a small classifier name the type. Publish the traces and the results by product, with purchase date and lot code.

Why it is still open

No API or US government rule defines a synthetic oil, and since 1999 Group III oils may be sold as synthetic. Shinjong Lee of Hyundai Motor Group and colleagues at the University of Warwick showed in 2022 that GC-MS separates PAO from Group II and III oils by the shape of the trace, but they tested five neat base oils, not finished oils. Searches of GitHub, Hugging Face, Zenodo and the web in November 2026 found no open library of base oil traces and no survey of retail synthetic oils by base oil type.

pmc.ncbi.nlm.nih.govmotor.com

Built with what exists

GC-MS time at a university or contract laboratory; reference base oils bought from distributors, with their API group on the data sheet; blends of known proportions made by weight; Python with scikit-learn for the classifier; Zenodo to publish the traces.

  1. First step

    Buy six base oils of known group, run each by GC-MS at one laboratory, and publish the traces and the method.

  2. Done looks like

    A library of at least 30 reference base oils across Groups II, III, GTL and PAO; a blind test on 20 blends of known make-up in which the main base oil is named correctly at least 90% of the time; and at least 40 retail "full synthetic" oils from at least three countries classified, with every trace published under an open license.

Open 02 · the brief

Biodegradable labels, retested

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

An independent retest of marine lubricants sold as environmentally acceptable under the Vessel General Permit. Buy stern tube oils, hydraulic oils and greases off the shelf, have accredited contract laboratories run both OECD 301B and the lubricant-specific test CEC-L-103-12 on the same lots, and publish how each product scores against its own data sheet and against the permit's definition.

Why it is still open

The permit accepts OECD 301B, which measures only the carbon dioxide given off. A 2014 Lubes'n'Greases article quoting Ben Müller-Zermini, head of the laboratory at the lubricant maker Hermann Bantleon, notes that a mixture containing parts that do not biodegrade can still reach 60% in that test, and that biodegradation tests other than OECD 301A and CEC-L-103-12 reproduce poorly. Searches in November 2026 found suppliers' own test reports but no independent retest of products on sale.

lubesngreases.comepa.gov

Built with what exists

Contract laboratories accredited to ISO/IEC 17025 that offer OECD 301B and CEC-L-103-12; suppliers' published data sheets; a spreadsheet to record lot numbers, claims and results.

  1. First step

    List the products that 10 suppliers market as compliant EALs, with the test methods and results each data sheet states.

  2. Done looks like

    At least 15 products from at least 8 brands, each tested in duplicate by both methods, published with lot numbers and a tally of how many meet the permit's definition by each method and how far the two methods disagree.