Industries / Mining and materials / Insulation manufacturing
Natural fibers
Natural fiber insulation is made from plant and animal material: waste paper blown in as cellulose, wood fiber boards and batts, cork, straw, hemp, sheep's wool and, lately, farm waste bound by fungus.
5
Milestones achieved, from 1893 to 2026.
1
To watch for: announced, not yet confirmed outside.
2
Open deliverables. Nobody has shipped them.
The road
AchievedWatch forOpen
Achieved
1893
Cork baked into board
A New York boat builder, John T. Smith, found that cork granules packed in a tin funnel that fell into a fire did not burn but expanded and fused into a solid block, held by the cork's own resin. He patented it as "Smith's Consolidated Cork" and licensed it to Armstrong, then a cork products company, and the board insulated cold stores for decades, by BuildingGreen's account, which dates the find to 1893. Amorim Isolamentos in Portugal still makes the board by heating granules with steam in an autoclave at about 650 °F (about 340 °C) for 20 minutes, with no added binder.
Credit
John T. Smith; Armstrong
1930s
Boards from wet wood fiber
Soft wood fiber boards were first made industrially about 75 years before 2007, by the account of Informationsdienst Holz, the German timber trade's technical information service. In the wet process, wood chips are steamed, ground into fiber and stirred into water; the mat is pressed and dried at 160 to 220 °C, and the wood's own lignin binds it, so no glue is needed. Wet-process boards come 3 to 32 mm thick and must be glued in layers to go thicker. The later dry process, which adds a binder to dried fiber, makes boards 20 to 240 mm thick in one piece.
Credit
not named in the source
1978
Fire rule for cellulose
In July 1978 the US Congress passed the Emergency Interim Consumer Product Safety Standard Act. It found that "an unreasonably large quantity of cellulose insulation" on sale did not meet minimum safety standards, made the flame-resistance and corrosiveness rules of a federal purchasing specification, GSA HH-I-515C, a mandatory standard, and required every container to say the standard "is based upon laboratory tests only". The Consumer Product Safety Commission's rule, 16 CFR 1209, covers cellulose insulation made after 15 October 1979.
Credit
US Congress; Consumer Product Safety Commission
2013
Ammonia forces a recall
French cellulose insulation used boric acid as both fire retardant and biocide until September 2011, when boron was banned for biocidal uses, and makers switched to ammonium salts. Poison centres recorded people made ill from November 2011, a producers' association logged about 150 complaints, and officials measured ammonia in homes above safe long-term levels. France banned and recalled cellulose insulation with ammonium salts in June 2013. The EU then set a limit for all cellulose insulation from 14 July 2018: ammonia below 3 ppm in a chamber test run for at least 14 days at 90% humidity.
LessonA substitute chemical needs testing in the finished product under damp conditions, not only for the job it replaces.
Credit
French government; European Commission
2026
Wood fiber made in America
TimberHP bought a closed paper mill in Madison, Maine, in 2019 to make wood fiber insulation, which it says had not been made in the United States before. Pandemic delays and inflation slowed the work. The company raised $122 million, ran short of cash and filed for Chapter 11 bankruptcy in 2025, then came out of it making two of the three products it had planned, with about 80 staff, about half its goal, The New York Times reported in August 2026. In October 2026 Weyerhaeuser took US distribution rights for its batts and boards.
LessonRefitting an old mill for a new product took longer and cost more than the money raised for it.
Credit
TimberHP; co-founder Joshua Henry
Watch for
Fungus-bound panels at scale
Mykor, a company in Bristol, England, says its panels of waste biomass bound by fungal mycelium (the root-like threads of a fungus) match polystyrene products for heat and sound insulation while using 90% less water and 40% less electricity to make, and save about 23 kg CO2e per square metre of wall. It raised £4 million in May 2026 to expand production.
Achieved whena product carries a declared lambda and fire class from an accredited laboratory and ships from a plant at a stated yearly volume.
Claimed by
Mykor, May 2026
Open
01
A round robin for mycelium
An interlaboratory comparison, often called a round robin: one batch of mycelium-bound hemp shiv board, grown to one recipe and cut into twin samples, sent to at least five laboratories that measure thermal conductivity with heat flow meters (EN 12667 or ASTM C518), with density and moisture, and the spread between labs published.
The briefCredit · unclaimed02
A cheap ammonia screen
A low-cost test box that holds a sample of loose-fill cellulose at 90% humidity for 14 days and logs ammonia with an electrochemical sensor, checked against an accredited lab's result on the same bags, so that importers, buyers and inspectors can screen products against the EU's 3 ppm limit.
The briefCredit · unclaimed
Open 01 · the brief
A round robin for mycelium
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
An interlaboratory comparison, often called a round robin: one batch of mycelium-bound hemp shiv board, grown to one recipe and cut into twin samples, sent to at least five laboratories that measure thermal conductivity with heat flow meters (EN 12667 or ASTM C518), with density and moisture, and the spread between labs published.
Why it is still open
Published values come from single labs. Joni Wildman and colleagues at the University of Bath grew boards with 18 strains of 17 fungal species, measured 0.0376 to 0.0451 W/m·K in one lab, and found density mattered more than species (Scientific Reports, January 2026). Crossref searches in November 2026 found round robins for loose-fill and ceramic-fiber insulation but none for mycelium composites.
Built with what exists
Hemp shiv; a fungus strain sold for growing, such as oyster mushroom (Pleurotus ostreatus); a clean grow room and a drying oven; heat flow meters in university building-physics labs; a shared protocol on GitHub.
First step
Write the sample protocol and ask five building-physics labs with heat flow meters to take part.
Done looks like
At least five labs report lambda on twin samples from the same batch, and the published between-lab spread, in W/m·K, is set against the 0.0075 W/m·K spread between species that Wildman and colleagues reported.
Open 02 · the brief
A cheap ammonia screen
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A low-cost test box that holds a sample of loose-fill cellulose at 90% humidity for 14 days and logs ammonia with an electrochemical sensor, checked against an accredited lab's result on the same bags, so that importers, buyers and inspectors can screen products against the EU's 3 ppm limit.
Why it is still open
The EU limit is checked with a laboratory emission chamber method (CEN/TS 16516, adapted to 90% humidity and at least 14 days), and France's 2013 recall followed complaints from occupants, not routine screening. Crossref searches in November 2026 found no published low-cost screen for insulation.
Built with what exists
Sealed boxes; a saturated salt solution to hold the humidity; commercial electrochemical ammonia sensors; a Raspberry Pi logger; a certified low-concentration ammonia calibration gas.
First step
Build one box, calibrate its sensor against the calibration gas, and run a 14-day test on one bag of retail cellulose.
Done looks like
At least 10 cellulose products tested in duplicate and also by an accredited lab, with the box's readings within 1 ppm of the lab's near the 3 ppm limit, and all results published.