Industries / Mining and materials
Insulation manufacturing
Insulation manufacturing makes the materials that slow the flow of heat through walls, roofs, pipes and equipment: wools spun from melted glass or rock, plastic foams, and boards and loose fill made from plant and animal fibers.
1896
On 1 November 1896 the Crystal Chemical Works at Alexandria, Indiana, began melting local limestone and blowing it into rock wool, a fiber sold as an insulator, the trade magazine Stone reported in February 1897.
33
Milestones achieved across 6 domains.
6
To watch for: announced, not yet confirmed outside.
12
Open deliverables. Nobody has shipped them.
In one minute
Where it started
Wool blown from iron-works slag was already sold as "mineral wool" when a chemist in Indiana began making rock wool from limestone in 1896. Cork board followed in the 1890s, glass wool in the 1930s, and plastic foams after Otto Bayer's polyurethane chemistry of 1937 and Dow's extruded polystyrene patent of 1948. Much of the early demand came from cold stores and refrigeration, which is also why the first instruments for measuring insulation were built.
Where it stands
In 2009 five makers, Saint-Gobain, Rockwool, Paroc, URSA and Knauf Insulation, made about 95% of the mineral wool sold in the European Union, 70% of it stone wool, by a study for the European Commission, and in 2015 the US Environmental Protection Agency counted 30 glass wool plants and 8 mineral wool plants in the United States. The industry has moved its wools off formaldehyde binders and is moving its foams off fluorinated blowing gases, which EU law bans in all foam from 2033. The Grenfell Tower Inquiry's 2024 report showed how two makers had tested and sold combustible foam boards, and fire claims are now under closer watch.
What is open
Most open jobs are public records and independent checks that nobody has assembled: emissions plant by plant, a register of which gas is in which foam, fire claims checked against the reports behind them, and foam boards tracked as they lose R-value with age. Newer products, from fungus-bound panels to recycled foam ingredients, still need several laboratories to measure the same samples before buyers can trust the numbers. The tools for all of these exist: heat flow meters in university laboratories, handheld spectrometers, AI models that read long documents, and public registries.
Domains
AchievedWatch forOpen
Domain
Progress
Last achieved
Watch for
Open
Glass and stone wool
Glass and stone wool is the work of melting sand and recycled glass, or volcanic rock and slag, spinning the melt into fine fibers, and binding the fibers into batts, rolls and boards.
5 · 1 · 2
Last achievedBinders drop formaldehyde2002
Watch forElectric and plasma melting
2
openFoam boards and spray foam
Foam boards and spray foam is the making of plastic foams whose small closed cells hold a gas that slows the flow of heat: boards and blocks made in factories, and foam made on site from two liquids that react and expand as they are sprayed.
7 · 1 · 2
Last achievedEurope ends fluorinated foam gases2024
Watch forFlame retardant bonded into foam
2
openNatural fibers
Natural fiber insulation is made from plant and animal material: waste paper blown in as cellulose, wood fiber boards and batts, cork, straw, hemp, sheep's wool and, lately, farm waste bound by fungus.
5 · 1 · 2
Last achievedWood fiber made in America2026
Watch forFungus-bound panels at scale
2
openPerformance testing
Performance testing is measuring how well an insulation product slows the flow of heat, in the laboratory and over the product's life, and reporting the result on labels and certificates.
6 · 1 · 2
Last achievedWalls measured, not assumed2015
Watch forWet R-value for buried foam
2
openFire safety
Fire safety is testing and classing how insulation products burn, alone and built into walls, and the rules that changed after fires.
6 · 1 · 2
Last achievedEurope agrees one facade test2024
Watch forFacade tests rank like chance
2
openRecycling
Recycling is taking insulation waste, from factory trimmings, building-site offcuts and demolition, back into new insulation or other products, and handling safely what cannot be reused.
4 · 1 · 2
Last achievedEPS recycler goes bankrupt2022
Watch forRecycled polyol for PIR boards
2
open
Open in insulation manufacturing
3 of 12 open deliverables
Open · Glass and stone wool
Plant-by-plant melting emissions
A public table of every glass wool and stone wool plant in Europe and the United States, with its owner, its product, its melting method (gas furnace, coke cupola or electric) and its yearly verified CO2 emissions from 2013 to 2025, with the dates of electric conversions marked, and the code that builds it.
Built with what exists
The EU Union Registry's yearly verified-emissions files; EPA's 2015 count of 30 wool fiberglass and 8 mineral wool plants as a US checklist; company annual and sustainability reports for melter types; Python with pandas; a language model to propose a melter type from each report for a person to confirm.
Open · Foam boards and spray foam
A register of blowing agents
A public table of foam insulation products sold in the US, the EU and at least one Asian market that gives, for each product, its blowing agent, that gas's GWP and the document the answer came from. A language model reads each maker's safety data sheets (SDS) and environmental product declarations (EPDs), and a person checks a sample. A new snapshot every six months shows the move off HFCs that US rules required from 2025 and that EU law requires for all fluorinated gases by 2033.
Built with what exists
SDS and EPD files from makers' websites and EPD registries; a document-reading model such as Claude, or Gemini Decision 1 to pick each product's agent from a fixed list (see the Note "A thousand questions, one pass"); GWP values from Annexes I and II of Regulation (EU) 2024/573; Python and a public Git repository.
Open · Natural fibers
A round robin for mycelium
An interlaboratory comparison, often called a round robin: one batch of mycelium-bound hemp shiv board, grown to one recipe and cut into twin samples, sent to at least five laboratories that measure thermal conductivity with heat flow meters (EN 12667 or ASTM C518), with density and moisture, and the spread between labs published.
Built with what exists
Hemp shiv; a fungus strain sold for growing, such as oyster mushroom (Pleurotus ostreatus); a clean grow room and a drying oven; heat flow meters in university building-physics labs; a shared protocol on GitHub.