BRENNEN

Industries / Industrial equipment and services / Industrial services

Work orders and permits

Work orders record what maintenance is to be done, and permits to work control when and how hazardous jobs, such as welding, entering vessels and opening pipes, may start.

5

Milestones achieved, from 1985 to 2005.

1

To watch for: announced, not yet confirmed outside.

2

Open deliverables. Nobody has shipped them.

In depth

The same ground is charted in more depth, as an industry of its own.

The road

AchievedWatch forOpen

Achieved

  1. 1985

    Work orders on a PC

    Project Software & Development Inc. released Maximo 2.0 in 1985, a single-user program for the IBM PC AT that handled work orders and inventory. Maximo is now sold by IBM.

    ibm.com

    Credit

    Project Software & Development Inc

  2. 1988

    A permit nobody passed on

    On the Piper Alpha oil platform in the North Sea, condensate pump A's pressure relief valve had been removed for maintenance under a separate permit and a blind flange fitted in its place. The inquiry found the most likely cause of the first explosion was the release of as little as 30 kg of condensate, mainly propane, over 30 seconds through that unsecured blind flange. 167 men died. The permit system relied heavily on informal communication, and minimum standards for passing information between shifts were not set or met.

    LessonA permit protects people only if everyone who might restart the equipment knows it exists.

    engineersireland.ie

    Credit

    Lord Cullen's public inquiry, report published 13 November 1990

  3. 1989

    Lock it before work

    OSHA's lockout/tagout rule, published on 1 September 1989, set out how to disable machinery and equipment before servicing. It requires a lock on equipment that can take one, and allows a warning tag instead only where the employer can show the tag protects as fully.

    osha.gov

    Credit

    OSHA

  4. 1992

    Rules for contractors

    OSHA's process safety management standard, published on 24 February 1992, applies to contractors doing maintenance, repair, turnaround, major renovation or specialty work on or next to processes with highly hazardous chemicals. It requires a permit for hot work, meaning welding, cutting and other spark-making work, on or near those processes.

    osha.gov

    Credit

    OSHA

  5. 2005

    Guidance on permits to work

    The UK Health and Safety Executive published HSG250, guidance on permit-to-work systems for the petroleum, chemical and allied industries. It sets out principles for assessing a site's permit system, common terms for workers who move between sites, and a checklist, and it covers electronic as well as paper permits.

    hse.gov.uk

    Credit

    UK Health and Safety Executive

Watch for

  1. An AI agent for safety

    Ultimo, part of IFS, says its health, safety and environment "digital worker", which reads work orders and shift logs and recommends safety actions, recorded no missed recommended safety actions in a controlled trial group of manufacturers. It did not disclose the number of participants, the length of the trial or the number of recommendations.

    Achieved whenUltimo or a customer publishes the trial's size and an outside review counts the missed and false recommendations.

    itbrief.co.uk

    Claimed by

    Ultimo, July 2026

Open

  1. 01

    Isolation plans from P&IDs

    A tool that reads a P&ID (piping and instrumentation diagram, the drawing that shows every pipe, valve and instrument in a unit) and proposes the valves to close, the blinds to fit and the vents and drains to open to isolate one piece of equipment for work, for an experienced permit issuer to check.

    The brief
    Credit · unclaimed
  2. 02

    Read permits like an auditor

    A checker that reads completed permits to work, with their isolation and gas-test records, and flags errors such as a hazard marked "N/A" while it is present, a missing signature or an out-of-date gas test.

    The brief
    Credit · unclaimed

Open 01 · the brief

Isolation plans from P&IDs

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A tool that reads a P&ID (piping and instrumentation diagram, the drawing that shows every pipe, valve and instrument in a unit) and proposes the valves to close, the blinds to fit and the vents and drains to open to isolate one piece of equipment for work, for an experienced permit issuer to check.

Why it is still open

Isolation software such as Sphera's Interactive P&ID lets users mark isolation points on the drawing by hand, and the tool carries those marks into the plan. A 2026 study, ChatP&ID, showed that language models can answer questions about P&IDs stored as graphs, but it did not produce isolation plans.

sphera.comarxiv.org

Built with what exists

P&IDs in DEXPI, the open exchange format the ChatP&ID study used; a graph database; a large language model to explain each proposed isolation point.

  1. First step

    Take one public example P&ID in DEXPI format, write ten isolation tasks for it, and ask a permit issuer to solve them by hand.

  2. Done looks like

    50 isolation tasks on public P&IDs; two experienced permit issuers each write their own isolation plans without seeing the tool's; every isolation point the tool misses or adds is counted and published, and a pass means no missed points.

Open 02 · the brief

Read permits like an auditor

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A checker that reads completed permits to work, with their isolation and gas-test records, and flags errors such as a hazard marked "N/A" while it is present, a missing signature or an out-of-date gas test.

Why it is still open

At Valero in 2005 a permit marked the nitrogen purge "N/A" while the reactor was still being purged. Software sellers describe AI that checks permits, but none of their accounts found in this search gives a measured error rate, and Ultimo's trial did not state its size.

csb.govitbrief.co.uk

Built with what exists

The checklist in HSE's HSG250; a document-review model such as the Claude-based reviewer Enveda described (Notes: "Seven more flagged"); sample permits with errors planted by experienced issuers.

  1. First step

    Draft a sample permit form from HSG250 and ask two permit issuers to fill in 50 permits, ten with deliberate errors.

  2. Done looks like

    500 sample permits, 100 of them with planted errors the checker is not told about; the checker's catches and false alarms published next to those of two human auditors on the same permits.