BRENNEN

Industries / Industrial equipment and services / Industrial services

Scaffolding and access

Scaffolding and access contractors build the temporary platforms, and supply the rope-access technicians, that let other trades reach equipment at height.

4

Milestones achieved, from 1919 to 1987.

1

To watch for: announced, not yet confirmed outside.

2

Open deliverables. Nobody has shipped them.

In depth

The same ground is charted in more depth, as industries of their own.

The road

AchievedWatch forOpen

Achieved

  1. 1919

    A standard steel coupler

    Daniel Palmer-Jones and his brother David saw that scaffolding needed a standard set of fixings and patented the "Rapid Scaffixer", which won them work remodeling Buckingham Palace in 1913. Six years later Palmer-Jones invented the "Improved Universal Coupler", which Scaffmag says became the standard pattern used by the industry to the present day and moved the trade from timber and rope to tubular steel. His Tubular Scaffolding Company, founded in 1905, became Scaffolding Great Britain (SGB) in 1919.

    scaffmag.comscaffmag.com

    Credit

    Daniel Palmer-Jones

  2. 1944

    Frames speed the build

    SGB introduced the first frame scaffold system in 1944, according to Scaffmag. A frame scaffold is built from ready-made frames rather than loose tubes and couplers.

    scaffmag.com

    Credit

    SGB

  3. 1974

    Scaffolds without bolts

    Layher launched its Allround scaffold, whose parts lock together with wedges instead of bolts and take up to eight connections at one level of each upright.

    layher.com

    Credit

    Layher

  4. 1987

    Rope instead of scaffold

    The Industrial Rope Access Trade Association (IRATA) was formed in 1987, in part because existing law did not cover rope access, to solve maintenance problems in the offshore oil and gas industry. Rope access lets technicians reach a job by rope and harness instead of a scaffold. IRATA reports more than 700 member companies and more than 130,000 technicians trained.

    app01.irata.orgapp01.irata.org

    Credit

    IRATA and its founding member companies

Watch for

  1. A robot that builds scaffolds

    PERI and university partners led by the University of Southern Denmark built Genio, a mobile robot with two arms that lifts, positions and connects scaffold parts following a 3D plan made by a scaffolder. It was first shown in April 2025, has been tested only in closed, controlled settings, and a new three-year project will test it on realistic sites, possibly including industrial ones.

    Achieved whenthe robot builds scaffolds on working sites and an outside party reports its speed and errors against a human crew.

    sdu.dk

    Claimed by

    PERI and the University of Southern Denmark, July 2025

Open

  1. 01

    Draw the scaffold from scans

    Software that takes a laser scan of a plant area and the points a job must reach, and produces a system-scaffold design and parts list for a qualified scaffold designer to check.

    The brief
    Credit · unclaimed
  2. 02

    Fewest scaffolds for the jobs

    A planner that takes a turnaround's job list, with each job's location in a 3D model or scan, and finds the smallest set of scaffolds that reaches every job, with the order to build and take them down.

    The brief
    Credit · unclaimed

Open 01 · the brief

Draw the scaffold from scans

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

Software that takes a laser scan of a plant area and the points a job must reach, and produces a system-scaffold design and parts list for a qualified scaffold designer to check.

Why it is still open

Scaffolds are still designed by people. PERI describes scaffold design in 3D plant models, or in laser scans where no model exists, as menu-driven work by engineers, and Genio builds only from a design a scaffolder has made. A search found research on recognizing existing scaffolds in scans, but no tool that designs new ones from a scan.

bicmagazine.comsdu.dk

Built with what exists

Laser scans or a phone with a lidar sensor; CloudCompare, open-source software for point clouds; component dimensions from scaffold makers' catalogs; Google's OR-Tools; a coding agent such as Inkling 2 Small (Notes: "Checked without being asked").

  1. First step

    Scan one pipe rack and design its scaffold by hand, to serve as the first test case.

  2. Done looks like

    Designs produced automatically for 20 scanned areas; a qualified scaffold designer accepts at least 15 with only minor changes; parts lists within 10% of the designer's own.

Open 02 · the brief

Fewest scaffolds for the jobs

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A planner that takes a turnaround's job list, with each job's location in a 3D model or scan, and finds the smallest set of scaffolds that reaches every job, with the order to build and take them down.

Why it is still open

Scaffold numbers are large, with 979 erected by one contractor in a single 2021 turnaround, and each is planned and designed for its job. A search found no tool that plans the set of scaffolds across a whole job list.

turner-industries.com

Built with what exists

The scan-based designer above; Google's OR-Tools; the public turnaround test case under Turnarounds.

  1. First step

    Ask a scaffold contractor for one past job list, with names removed, showing the scaffolds requested and built.

  2. Done looks like

    On three plant areas with at least 40 jobs each, a plan that reaches every job with less total scaffold than the plan of an experienced scaffold planner, checked by that planner.