BRENNEN

Industries / Industrial equipment and services / IoT and industrial automation / Industrial controls and PLCs

Replacing old systems

Replacing old systems is the work of moving a running plant off controllers and control systems that their makers no longer sell or repair.

5

Milestones achieved, from 1999 to 2020.

1

To watch for: announced, not yet confirmed outside.

2

Open deliverables. Nobody has shipped them.

The road

AchievedWatch forOpen

Achieved

  1. 1999

    The millennium bug hunt

    Before 2000, plants had to find every controller and embedded chip that stored the year as two digits. A UK Health and Safety Executive survey, reported by Process Engineering, found that 54% of major-hazard (CIMAH) sites had no documented procedures for the date change, and that in 53% of systems found not compliant the source of the fault could not be found. Andy Nurse of Action 2000, the government-backed support group, said suppliers took up to four months to answer a compliance query.

    LessonMany plants did not know what was inside their own control systems, and an inventory is the first step of any replacement.

    processengineering.co.uk

    Credit

    UK Health and Safety Executive; Action 2000

  2. 2010

    A $65 billion backlog

    ARC Advisory Group estimated in 2010 that installed automation systems worth about $65 billion were reaching the end of their useful lives, and gave the same figure in 2015. Its analysts noted that wiring and input/output hardware can last 30 years or more and controllers upwards of 20, while operator software changes version about every 18 months, so most old systems mix parts of different ages.

    LessonARC warned that a plant that ends with "a like-for-like functional replacement" has missed its chance to improve.

    chemanager-online.comarcweb.com

    Credit

    Larry O'Brien and Dave Woll, ARC Advisory Group

  3. 2011

    Keeping a 1975 system running

    Yamatake, renamed Azbil in 2012, sells new electronics that plug into the racks of TDC 2000 control systems, first introduced in 1975, keeping their enclosures, field wiring and software. In 2011 ExxonMobil signed a contract with it for support of its TDC 2000 systems through 2025, and by 2015 Azbil said it supported more than 23,000 Data Hiway devices at 41 sites in 11 countries, figures ARC reported.

    LessonReplacement is not the only path, since new electronics in old racks keep the wiring and programs that cost most to redo.

    arcweb.com

    Credit

    Yamatake (Azbil) and ExxonMobil

  4. 2017

    The PLC-5 leaves sale

    Rockwell Automation stopped selling its Allen-Bradley PLC-5 controller, introduced in 1986, in June 2017, and stopped selling RSLogix 5, the software that programs it, on 31 December 2025. Integrators report that Rockwell's tool for importing PLC-5 programs into its newer ControlLogix "usually requires some cleanup of the code and I/O reassignment," and that the move from 16-bit to 32-bit processors can break code that uses indirect addressing or array functions.

    LessonA conversion tool moves the code, and people still have to find what it broke.

    crossco.comblog.hesconet.com

    Credit

    Rockwell Automation; reported by the integrators Crossco and HESCO

  5. 2020

    Siemens ends S5 repairs

    The life cycle of the Simatic S5 controller family, launched more than 40 years earlier, ended on 30 September 2020, after which Siemens supplied no spare parts and made no repairs. Siemens UK said many were still in use, naming Heinz's plant in Wigan, and credited the S5's STEP 5 software with bringing structured programming to plant engineers.

    news.siemens.co.uk

    Credit

    Siemens

Watch for

  1. AI reads old programs

    Siemens says its Eigen Engineering Agent "helps clarify legacy logic, adds comments." Copia Automation says Copia AI can "interpret complex or legacy codebases." Schneider Electric says engineers "spend most of their time deciphering existing code," which its copilot explains. None of the three publishes how accurate the explanations are.

    Achieved whenan outside test scores the tools' explanations of real old programs against those programs' original documents.

    siemens.comcopia.ioblog.se.com

    Claimed by

    Siemens, product page read November 2026; Copia Automation, undated product page read November 2026; Schneider Electric, November 2025

Open

  1. 01

    Test the code explainers

    An outside test of the AI tools that explain old controller programs. Collect old programs whose original documents survive, such as functional descriptions and input/output lists, give each tool only the program, and score its explanation against the documents.

    The brief
    Credit · unclaimed
  2. 02

    An open end-of-life table

    A public, machine-readable table of controller and control-system product lines from the main makers, with each line's release, end-of-sale and end-of-support dates linked to the maker's notice, kept current by an AI agent that rechecks the makers' lifecycle pages every week.

    The brief
    Credit · unclaimed

Open 01 · the brief

Test the code explainers

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

An outside test of the AI tools that explain old controller programs. Collect old programs whose original documents survive, such as functional descriptions and input/output lists, give each tool only the program, and score its explanation against the documents.

Why it is still open

The makers' claims come without published accuracy figures. The nearest published test, by Nodeblue, which sells its own program-analysis engine, asked 11 AI models three questions about one 110 MB Rockwell controller program in June 2026; working on the raw file, no model traced more than about 13 of the 37 input signals behind one motor. It scored answers against the engine's output, not against the program's original documents.

github.comblog.se.com

Built with what exists

Copia AI; Siemens' Eigen Engineering Agent, which Siemens offers with a one-month free trial; general AI models such as Claude or Gemini reading exported program text (see the Note "The jobs agents repeat"); old programs from closed plants, training rigs and integrators, with names removed; a scoring checklist written before any tool is run.

  1. First step

    Get five old programs with their original documents, run one model on one of them, and score it on a 20-item checklist.

  2. Done looks like

    30 programs from at least three discontinued controller families, such as the PLC-5, SLC 500 and S5, with each tool's explanations scored by two control engineers on the same checklist (every output's purpose, every interlock, every timer), and the scores and checklist published.

Open 02 · the brief

An open end-of-life table

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A public, machine-readable table of controller and control-system product lines from the main makers, with each line's release, end-of-sale and end-of-support dates linked to the maker's notice, kept current by an AI agent that rechecks the makers' lifecycle pages every week.

Why it is still open

End-of-life dates are announced maker by maker and reach plants through separate releases and resellers' posts, such as Siemens UK's October 2020 release on the S5 and HESCO's August 2025 reminder about RSLogix 5, which tells users to take inventory with Rockwell's own tools. endoflife.date, an open database of product support dates, listed no controller or control-system product in November 2026, and searches found no open table that gathers them across makers.

news.siemens.co.ukblog.hesconet.comendoflife.date

Built with what exists

makers' published lifecycle notices; an AI agent with a headless browser such as Playwright; a CSV or JSON file kept in a public Git repository, with each change logged.

  1. First step

    Gather the end-of-sale and end-of-support dates for 20 controller families from Rockwell, Siemens and Schneider Electric, each linked to its notice.

  2. Done looks like

    500 product lines from at least 10 makers, every date linked to a maker's notice, and a log showing the agent caught each new notice within seven days of publication over three months.