BRENNEN

Industries / Construction and property / Heavy civil

Bridges

Bridge building designs and puts up the structures that carry roads and railways over rivers, valleys and other roads.

6

Milestones achieved, from 1779 to 2022.

2

To watch for: announced, not yet confirmed outside.

2

Open deliverables. Nobody has shipped them.

The road

AchievedWatch forOpen

Achieved

  1. 1779

    The first iron bridge

    Builders at Coalbrookdale in Shropshire, England, cast a single 30 m arch entirely from iron. They joined its parts with methods borrowed from carpentry, such as dovetail joints. It opened to traffic on January 1, 1781. English Heritage calls it "the world's first iron bridge."

    english-heritage.org.uk

    Credit

    Thomas Farnolls Pritchard (design), Abraham Darby III (cast the iron and oversaw construction)

  2. 1907

    The Quebec Bridge falls twice

    The partly built cantilever bridge over the St. Lawrence River collapsed on August 29, 1907, and at least 75 of the 86 workers on it died. A Royal Commission found that the lower chords, the main compression members, failed in the anchor arm near the main pier. It blamed "errors of judgement" by the designing engineer, Peter Szlapka, and the consulting engineer, Theodore Cooper. On September 11, 1916, the rebuilt center span fell while it was being lifted into place, and 13 men died. The bridge was finished in 1917 and is described as the longest cantilever bridge in the world, more than 1,800 ft between its main piers.

    Lessonon a record span, the checks on the design matter as much as the steel.

    legionmagazine.comen.wikipedia.org

    Credit

    Royal Commission of inquiry (1908)

  3. 1928

    Concrete squeezed before loading

    Prestressed concrete is concrete held in compression by stretched steel wires, so it does not crack when a load bends it. Eugène Freyssinet patented his first prestressing method, "pretension and bonded wires," in October 1928. He added the flat jack in the late 1930s and an anchorage that let wires be tensioned after the concrete hardened, the start of post-tensioning. His Luzancy Bridge over the Marne, built 1941 to 1946, was made of precast concrete segments with all three of his inventions.

    Lessonconcrete keeps creeping and shrinking for years under load; Freyssinet learned this when the arches of his Veurdre Bridge, finished in 1912, began to sag and had to be jacked back into shape.

    aspirebridge.comen.wikipedia.org

    Credit

    Eugène Freyssinet. Sources disagree on the credit: the bridge magazine Aspire calls him "the acknowledged inventor of 'prestressed concrete'," while Wikipedia says others patented prestressing earlier, starting with Doehring in 1888

  4. 1940

    Wind tears down Tacoma Narrows

    The Tacoma Narrows suspension bridge in Washington State opened on July 1, 1940, and its main span fell into Puget Sound in a windstorm on November 7, 1940. Its deck was shallow and flexible, and it twisted itself apart in a self-feeding motion called flutter. The Washington State Department of Transportation says the collapse "changed forever how engineers design suspension bridges," and wind-tunnel testing of designs later became required. A replacement opened on October 14, 1950.

    Lessona deck strong enough to carry its own weight can still be shaken apart by wind, so its shape and stiffness against twisting have to be tested. ).

    wsdot.wa.goven.wikipedia.org

    Credit

    Leon Moisseiff (designer of the 1940 deck); Frederick Burt Farquharson of the University of Washington (wind-tunnel studies)

  5. 2006

    Whole bridges driven into place

    Builders now assemble whole bridge spans beside the road and drive them into position on self-propelled modular transporters (SPMTs), computer-controlled wheeled platforms that can carry several thousand tons. FHWA says this cuts the time traffic is blocked from the usual months to minutes or a few hours. A 2004 FHWA study tour of European projects made SPMT moves its top recommendation, and the Florida Department of Transportation used them to replace the I-4/Graves Avenue bridge in 2006.

    fhwa.dot.gov

    Credit

    European bridge owners and contractors; FHWA's 2004 prefabricated bridge study team; Florida DOT

  6. 2022

    A 2,023 m main span

    The 1915 Çanakkale Bridge across the Dardanelles in Turkey opened on March 18, 2022. Its operator gives its main span as 2,023 m between towers 318 m tall. That is 32 m longer than the 1,991 m span of Japan's Akashi Kaikyō Bridge, which held the record from 1998.

    1915canakkale.comen.wikipedia.org

    Credit

    DL E&C, Limak, SK ecoplant and Yapı Merkezi (builders); COWI (detailed design)

Watch for

  1. Messina Strait Bridge

    Italy plans a suspension bridge between Sicily and the mainland with a 3,300 m main span, more than 60% longer than any built. The government planning committee CIPESS approved it on August 6, 2025, but the Court of Audit refused to register that approval in late October 2025, so it could not take effect. In August 2026 Alessandro Morelli, the undersecretary responsible for CIPESS, said a second approval "should arrive by the end of September," after which the project must go back to the Court.

    Achieved whenthe Court of Audit registers an approval and main works start; the record span counts only when the bridge opens.

    milanofinanza.itconstructionbriefing.com

    Claimed by

    Italian Ministry of Infrastructure, Stretto di Messina S.p.A. and the Eurolink consortium led by Webuild, August 2025 to August 2026

  2. AI agents design bridge barriers

    A research team had a group of cooperating AI agents design reinforced-concrete highway barriers, the concrete railings along a bridge edge, to the US AASHTO bridge design rules. The authors report that across 60 designs the group of agents met the target range 98.3% of the time, against 11.7% for the best AI model working alone.

    Achieved whenan outside group reruns the method on its own design cases and gets matching results.

    arxiv.org

    Claimed by

    Wanting Wang, Xiye Ma, Yuyang He and Ran Cao, June 2026 (preprint; the authors' own test of their own method)

Open

  1. 01

    Bridge plans read by AI

    A hand-keyed answer key from 50 sets of bridge plans, with about 10 facts per bridge that also appear in the US National Bridge Inventory (NBI): number of spans, longest span, total length, deck width, main material, structure type and year built. Score two AI models that read images on the scanned sheets, and list every place where the NBI record disagrees with the plans.

    The brief
    Credit · unclaimed
  2. 02

    AI on worked design examples

    An answer key of 100 intermediate values (loads, bending moments, member strengths, stress checks) taken from FHWA's published bridge design examples. Score two AI models on it, each working alone and again with a tool that runs its own calculation code. A value counts as correct if it is within 1% of the published number. This is a test of the models only, not the design of a real bridge.

    The brief
    Credit · unclaimed

Open 01 · the brief

Bridge plans read by AI

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A hand-keyed answer key from 50 sets of bridge plans, with about 10 facts per bridge that also appear in the US National Bridge Inventory (NBI): number of spans, longest span, total length, deck width, main material, structure type and year built. Score two AI models that read images on the scanned sheets, and list every place where the NBI record disagrees with the plans.

Why it is still open

A 2025 paper from the University of Strathclyde says "2D engineering drawings remain a primary source of information for bridge assessment, yet extracting semantic content from these documents remains a manual, time-consuming task." Published methods train custom detectors on each group's own drawings; none found scores results against NBI fields or shares an answer key.

strathprints.strath.ac.uk

Built with what exists

General AI models that read drawings and text together, such as Claude Fable 5.2 (see the Note "Three working devices") or Gemini, which turn this from a custom training project into a small-team job; Tesseract OCR as a plain baseline; PyMuPDF to split plan sets into sheets; FHWA's public NBI files; Python.

  1. First step

    Collect 10 plan sets from a lawful public source, such as a state transportation department's plan archive, key the 10 facts by hand, and match each bridge to its NBI record by structure number.

  2. Done looks like

    A published answer key of 500 values (50 bridges by 10 facts) with sheet references; accuracy for each fact and each model; a count of NBI-versus-plan disagreements, each checked by hand; scripts anyone can rerun.

Open 02 · the brief

AI on worked design examples

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

An answer key of 100 intermediate values (loads, bending moments, member strengths, stress checks) taken from FHWA's published bridge design examples. Score two AI models on it, each working alone and again with a tool that runs its own calculation code. A value counts as correct if it is within 1% of the published number. This is a test of the models only, not the design of a real bridge.

Why it is still open

In June 2026 the best AI model working alone met the AASHTO target range in only 11.7% of 60 barrier designs. A benchmark of civil engineering problems posted on November 16, 2026, found that "evaluation of representative state-of-the-art VLMs reveals substantial limitations in domain-specific reasoning." No scoring of AI models against FHWA's own worked examples was found.

arxiv.orgarxiv.org

Built with what exists

FHWA's "Load and Resistance Factor Design (LRFD) for Highway Bridge Superstructures" design examples (National Highway Institute course 130081); AI models that can write and run code, which lets a model check its own arithmetic; Python to compare answers.

  1. First step

    Key the first 20 values from one design example by hand and run one model on them.

    fhwa.dot.gov

  2. Done looks like

    The published key of 100 values with page numbers, accuracy for each model and mode, and a tally of error types: wrong load factor, wrong clause, unit slip, arithmetic.