BRENNEN

Industries / Construction and property / Commercial and residential construction / Glazing

Measuring and shop drawings

Measuring is taking the size of every opening before anything is made, and shop drawings are the glazier's own drawings and calculations, showing each frame, glass size, glass type and fixing, which the architect approves before fabrication starts.

5

Milestones achieved, from 1905 to 1995.

1

To watch for: announced, not yet confirmed outside.

3

Open deliverables. Nobody has shipped them.

The road

AchievedWatch forOpen

Achieved

  1. 1905

    Frames in standard sizes

    Before then, window frames were built as needed by local carpenters, lumberyards and millwork shops, with no standard sizes, and air and water leaks were common, by Andersen's account. In 1905 the Andersen Lumber Company of Hudson, Wisconsin, adopted a "two-bundle" method: the horizontal and vertical frame parts were shipped in two bundles, which set standard window sizes and let the company mass-produce interchangeable parts. Andersen says a carpenter could then assemble and install a frame in 10 minutes. The International Directory of Company Histories puts the frame business's first-year sales at $74,000 and says the company passed one million frames in 1928.

    andersenwindows.comencyclopedia.com

    Credit

    Hans Jacob Andersen and his sons

  2. 1960s

    One chart sized the glass

    From the 1960s into the 1980s, most US architects and engineers chose glass thickness from one simple chart: maximum load against glass area, with a straight line for each thickness, drawn at a probability of breakage of 8 lites (panes) in 1,000 for annealed glass, the ordinary glass that has not been heat-treated. The lines came from breaking more than 3,000 lites of new, "factory-fresh" glass at Libbey-Owens-Ford's research facility in Ohio, and assumed a load lasting 60 seconds, firm support on all four edges and a design factor of 2.5, by the account of glass engineer Bill Lingnell in Glass Canada (2011).

    glasscanadamag.com

    Credit

    Libbey-Owens-Ford

  3. 1989

    A standard for glass strength

    In the 1970s PPG Industries drew new thickness charts from a stress analysis that took the pane's shape into account, and their answers differed from the old straight-line charts. The dispute went to ASTM, the standards body, and after nearly 10 years of debate ASTM E1300-89 appeared in 1989. It rests on the glass failure prediction model of W. Lynn Beason, developed at Texas Tech University's Institute for Disaster Research with National Science Foundation funding (report, 1980), which ties a pane's chance of breaking to the flaws in its surface. The first edition covered rectangular annealed glass held on four edges, in 12 thicknesses from 2.5 mm to 22 mm; the 1994 edition added factors for heat-strengthened, tempered, laminated and insulating glass, and the 1997 edition added insulating units with two different panes.

    LessonThe standard's flaw values were set to match the strength of weathered glass removed from buildings, not the factory-fresh plates behind the older charts.

    glasscanadamag.comnehrpsearch.nist.govastm.org

    Credit

    W. Lynn Beason, Texas Tech University; ASTM's glass task group

  4. 1993

    A laser replaces the tape

    Leica showed the first DISTO, a handheld meter that measures distance with a laser beam, in Paris in 1993, by the account of its parent company Hexagon. The University of New South Wales' surveying instrument collection dates the first DISTO to 1994 and calls it the first handheld electronic distance meter with a visible red laser, so the user can see the point being measured, and says it changed how indoor spaces such as rooms were measured. A later model in that collection reads 0.2 to 200 m to about ±3 mm.

    blog.hexagongeosystems.comvm.civeng.unsw.edu.au

    Credit

    Leica

  5. 1995

    Orders sent to machines

    LiSEC, an Austrian maker of insulating glass lines, turned its software department into a subsidiary in 1995 to sell programs that connect office ordering with the machines, up to complete production control systems. Window and facade design software now does the same from the drawing: Logikal, sold by Forterro Logikal GmbH of Leer, Germany, designs and prices windows, doors and facades from profile makers' system data, works out material orders and transfers manufacturing data directly to CNC (computer-controlled) machines, and says it has more than 18,000 users. A size entered once in the estimate can reach the saw without being redrawn.

    lisec.comlogikal-software.com

    Credit

    LiSEC Software GmbH; Logikal

Watch for

  1. Shop drawings drawn automatically

    Dextall, a New York maker of prefabricated facades, says Kora Studio, which it opened to early users on 21 April 2026, runs inside Revit (a common building-design program) and uses machine-learning models trained on thousands of facade configurations to carry each design change through the facade model. It says this removes an average of 315 hours of manual expert work per mid- and high-rise project, and that shop and fabrication drawings are generated automatically when Dextall makes the facade.

    Achieved whenan early-access architect or another outside party publishes the hours logged on comparable projects with and without the tool, or a fabricator publishes how many corrections the generated shop drawings needed.

    financialcontent.com

    Claimed by

    Dextall, April 2026

Open

  1. 01

    Phone scans against the tape

    A public tally of how close phone measuring apps come to a steel tape when sizing existing window openings for replacement windows, which are made to order from those numbers. Each opening is measured by two people with a tape, three times in width and height, and by each app, from inside the house at ground-floor windows.

    The brief
    Credit · unclaimed
  2. 02

    Weathered glass, tested openly

    An open data set of the breaking strength of glass taken from windows removed during replacement, using only panes the contractor has already taken out of their sashes, from houses built in 1978 or later, so that no lead paint is disturbed. Each pane is recorded with the window's age, facing and location, tested as small coupons in a concentric-ring bending fixture, and fitted to the surface-flaw values of the glass failure prediction model for comparison with ASTM E1300.

    The brief
    Credit · unclaimed
  3. 03

    Glazing conflicts before the addenda

    A public test set of at least 30 public bid packages (drawings and specifications) for buildings, with an answer key made from the glazing conflicts that the designers later corrected in addenda or answered in published requests for information: a glass make-up, U-factor or frame finish in the specification that differs from the window schedule or elevations. Each AI document checker is scored on how many of those conflicts it flags from the original package, and how many false flags it raises.

    The brief
    Credit · unclaimed

Open 01 · the brief

Phone scans against the tape

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A public tally of how close phone measuring apps come to a steel tape when sizing existing window openings for replacement windows, which are made to order from those numbers. Each opening is measured by two people with a tape, three times in width and height, and by each app, from inside the house at ground-floor windows.

Why it is still open

The tests found are informal. In 2018 an iMore writer measured one kitchen window with six AR measuring apps against a metal tape, found that AirMeasure came closest, and advised a physical tape "if you need absolute accuracy". In 2026 a SlashGear writer found the iPhone Measure app's automatic rectangle tool about 3% off on objects of known size. A 2024 study at Universiti Teknologi MARA in Malaysia checked an iPhone 13 Pro's LiDAR scan of one building against a Leica laser meter: of its measurements of windows, doors, columns and walls, 27% agreed at the millimetre level and 73% only at the centimetre level. That study tested a scan made for a 3D building model, not the apps people use to order windows. Searches in November 2026 of the web and of GitHub ("window opening measurement", "window measurement lidar") found no study of phone measurements of window openings for ordering.

imore.comslashgear.compublisher.uthm.edu.my

Built with what exists

Phones with and without a LiDAR depth sensor; Apple's Measure app and other measuring apps; a steel tape; a Leica DISTO or similar laser meter as a second reference; a spreadsheet and Python for the error statistics.

  1. First step

    Measure 20 openings in one house with a tape, two people and three readings each, then with two phone apps, and log every reading.

  2. Done looks like

    At least 200 openings in at least 20 homes, published with tape readings and every app's readings; the error in mm for each app, the share of readings within 3 mm (1/8 in) and within 6 mm (1/4 in) of the tape, and how many windows would have been ordered the wrong size if the app's reading had been used.

Open 02 · the brief

Weathered glass, tested openly

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

An open data set of the breaking strength of glass taken from windows removed during replacement, using only panes the contractor has already taken out of their sashes, from houses built in 1978 or later, so that no lead paint is disturbed. Each pane is recorded with the window's age, facing and location, tested as small coupons in a concentric-ring bending fixture, and fitted to the surface-flaw values of the glass failure prediction model for comparison with ASTM E1300.

Why it is still open

E1300's flaw values were chosen to reflect weathered glass, and the data behind them is decades old. A paper at the Facade Tectonics 2022 World Congress, by Nabhajit Goswami and co-authors, gathered 13 historical sets of weathered annealed glass broken in tests, citing studies from 1981 to 1987, and found that E1300 "appears to overestimate" the load resistance of weathered glass at a breakage probability of 8 in 1,000; the data sections of the paper are behind a sign-in. Code for the model is public on GitHub (structengprof/GFPM, 2020), but no open set of weathered-glass strengths was found in November 2026.

facadetectonics.orgglasscanadamag.comgithub.com

Built with what exists

Annealed glass from window-replacement jobs; a glass cutter; a universal testing machine with a concentric-ring fixture, closed inside a polycarbonate shield; the structengprof/GFPM code; Python with SciPy for maximum-likelihood fits; a low-cost AI model to transcribe the tables of the old reports into data (see the Note "The jobs agents repeat").

  1. First step

    Ask two replacement contractors to set aside the panes from ten removed windows each, from houses built in 1978 or later, with the year each house was built, and cut and label coupons from one.

  2. Done looks like

    At least 300 coupons from at least 30 windows of known age, from at least two facings, with every strength published under an open license; fitted flaw values with confidence ranges; and a table setting the resulting load resistance beside E1300's charts for three common pane sizes.

Open 03 · the brief

Glazing conflicts before the addenda

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A public test set of at least 30 public bid packages (drawings and specifications) for buildings, with an answer key made from the glazing conflicts that the designers later corrected in addenda or answered in published requests for information: a glass make-up, U-factor or frame finish in the specification that differs from the window schedule or elevations. Each AI document checker is scored on how many of those conflicts it flags from the original package, and how many false flags it raises.

Why it is still open

Several products now sell this check without published accuracy. Document Crunch, a Trimble company, says its CrunchAI compares drawings, contracts and specifications to find "conflicting requirements" (October 2026); InspectMind AI's launch on Y Combinator's site says it scans drawings, specs and codes for mismatches; Civils.ai's glazing takeoff tells users to have their own team review its draft. None of these pages gives an error rate, and no public benchmark of glazing conflicts was found in November 2026.

engineering.comycombinator.comcivils.ai

Built with what exists

Bid packages and addenda that public school districts, housing authorities and cities post on their procurement sites; an AI model that reads long PDFs and returns structured findings (see the Note "The jobs agents repeat"); a spreadsheet answer key drawn up by two people working separately.

  1. First step

    Download ten public bid packages that include addenda, and list every addendum item that changes glass, frames or sealants.

  2. Done looks like

    30 bid packages, at least 100 addenda-corrected glazing conflicts in the key with the two people agreeing on at least 90% of them, and each tool's share of conflicts found and count of false flags published with the package list.