Industries / Mining and materials / Mining and quarrying / Frac sand
Dust control
Dust control keeps fine quartz dust, given off when sand is dug, dried, dropped and blown through hoses, out of workers' lungs and neighbors' air; the dust that matters is respirable crystalline silica, quartz particles of about 4 micrometers (µm) or smaller that reach deep into the lungs.
5
Milestones achieved, from 2001 to 2023.
1
To watch for: announced, not yet confirmed outside.
2
Open deliverables. Nobody has shipped them.
The road
AchievedWatch forOpen
Achieved
2001
Sand workers' deaths counted
NIOSH, the US federal institute for workplace health research, followed 4,626 workers from 18 US industrial sand plants. It found 18.2 times the expected number of deaths from silicosis, a scarring lung disease caused by silica (17 deaths), and 1.6 times the expected deaths from lung cancer (109 deaths). Their average exposure, estimated from 4,269 dust samples taken from 1974 to 1995, was about 0.05 mg/m³, the limit NIOSH recommends.
LessonThe authors said the results support the International Agency for Research on Cancer's 1997 finding that crystalline silica causes cancer in people.
Credit
Kyle Steenland and Wayne Sanderson, NIOSH
2012
Frac crews breathe silica
In June 2012 OSHA and NIOSH warned that workers at hydraulic fracturing sites can breathe silica far above legal limits. NIOSH had taken full-shift air samples at 11 sites in Arkansas, Colorado, North Dakota, Pennsylvania and Texas: of 116 samples, 47% were above OSHA's limit, 79% above NIOSH's 0.05 mg/m³ and 9% at 10 or more times OSHA's limit. NIOSH named seven dust sources, among them the thief hatches, access ports on top of sand movers that puff dust while trucks refill them. Its 2013 paper, which counts 111 samples, calls this the first systematic study of crew exposures during fracturing.
LessonCrews who spent the day in cabs with filtered air stayed below NIOSH's limit, while those in unfiltered cabs did not.
Credit
Eric Esswein and colleagues at NIOSH, with OSHA
2013
A limit for outdoor air
As new sand mines opened, the Minnesota Department of Health set a chronic health-based value of 3 micrograms per cubic meter (µg/m³) for respirable silica in outdoor air, published in July 2013, and the Minnesota Pollution Control Agency (MPCA) gathered air data from sand facilities from 2012 to 2017. MPCA's monitor in Winona, a town on the sand-truck routes, found silica on only 2 sampling days in 2014, and the year's average was below the 0.3 µg/m³ detection limit.
Credit
Minnesota Department of Health and MPCA
2021
The fracturing dust deadline
OSHA's 2016 silica standard set a limit of 50 µg/m³ but gave hydraulic fracturing extra time. Most duties began on 23 June 2018; the duty to use engineering controls, such as enclosures and dust collectors, rather than relying on respirators, began for fracturing on 23 June 2021.
Credit
OSHA
2023
Sand mines top silica tables
NIOSH researchers analyzed the silica samples taken by the Mine Safety and Health Administration (MSHA) at US metal and nonmetal mines from 2000 to 2019. At surface industrial sand mines, 44.2% of 1,137 samples were above NIOSH's 50 µg/m³ limit and 21.0% above MSHA's legal limit, against 25.0% and 9.9% at construction sand and gravel pits; at underground industrial sand mines 53.9% of 206 samples were above 50 µg/m³.
Credit
Shilpi Misra, Aaron Sussell, Samantha Wilson and Gerald Poplin, NIOSH Spokane Mining Research Division
Watch for
Sand mines' new limit waits
MSHA's 2024 rule lowered miners' silica limit to 50 µg/m³, due at metal and nonmetal mines, which include industrial sand mines, on 8 April 2026. On 11 April 2025 the Eighth Circuit Court of Appeals stayed the deadlines after industry groups, including the National Stone, Sand and Gravel Association, challenged the rule, and MSHA paused enforcement. On 12 November 2026 MSHA proposed changes to monitoring, respirators, medical checks and records while keeping the 50 µg/m³ limit and the 25 µg/m³ action level; comments close on 11 January 2027.
Achieved whenMSHA enforces the 50 µg/m³ limit at industrial sand mines.
Claimed by
MSHA, November 2026
Open
01
Sand mine silica since 2020
A public table, with the code that builds it, of every MSHA silica sample taken at US industrial sand mines from 2020 on, by year, mine, state and job, showing how often samples exceeded 50 µg/m³ and 25 µg/m³, the new limit and action level.
The briefCredit · unclaimed02
Score the wellsite dust controls
An open table of every published measurement of silica in workers' air at fracturing sites since 2010, in any country, together with OSHA's own inspection samples from oil and gas support companies, set out by sand-handling method (pneumatic sand movers, boxes, silos) and by year, before and after the 23 June 2021 deadline.
The briefCredit · unclaimed
Open 01 · the brief
Sand mine silica since 2020
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A public table, with the code that builds it, of every MSHA silica sample taken at US industrial sand mines from 2020 on, by year, mine, state and job, showing how often samples exceeded 50 µg/m³ and 25 µg/m³, the new limit and action level.
Why it is still open
The latest outside analysis, by Misra and colleagues in 2023, stops at 2019, gives industrial sand as single rows for the whole 20 years and names no mines; it also notes that MSHA took far fewer silica samples in 2018 and 2019. MSHA's own impact analysis for its 2024 rule also used samples from 2005 through 2019 only, and grouped industrial sand with sand and gravel.
Built with what exists
MSHA's Open Government Data files (Personal Health Samples and Mines), Python with pandas, and the Misra paper's selection rules (samples with more than 1% quartz).
First step
Download the samples and mines files from MSHA's open data page, keep silica samples at mines whose commodity is industrial sand, and count them per year.
Done looks like
A notebook that first reproduces Misra's surface industrial sand row for 2000 to 2019 (1,137 samples, geometric mean 44.0 µg/m³) within 5%, then gives for each year from 2020 to 2025 the number of samples and the shares above 50 and 25 µg/m³, split by surface, underground and mill and by the five most-sampled jobs.
Open 02 · the brief
Score the wellsite dust controls
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
An open table of every published measurement of silica in workers' air at fracturing sites since 2010, in any country, together with OSHA's own inspection samples from oil and gas support companies, set out by sand-handling method (pneumatic sand movers, boxes, silos) and by year, before and after the 23 June 2021 deadline.
Why it is still open
A 2019 NIOSH review found that vendors' results for new controls, such as PropX's and Arrows Up's, were presented without third-party confirmation or public data, and asked for published studies. NIOSH's own mini-baghouse, a filter-bag cover for sand-mover hatches, was tested for a few days at one Arkansas site in 2013 and 2015, with long-term trials still planned. A search for a review of fracturing silica measurements from 2019 to 2026 found none.
Built with what exists
OSHA's Chemical Exposure Health Data files, published by year through 2026; Europe PMC and Crossref to find papers; a model that answers fixed-choice questions, such as Gemini Decision 1, to sort each sample by sand-handling method from the paper's text, with a person checking each row (see the Note "A thousand questions, one pass"); Python.
First step
Download OSHA's sample files for 2015 to 2026, keep the silica results from oil and gas support companies (industry code NAICS 213112), and count samples per year.
Done looks like
A public table with every study found, each row linked to its source; OSHA's silica samples for oil and gas support work coded as fracturing or not; the share of personal samples above 50 µg/m³ for 2015 to 2020 and for 2021 to 2026, with counts; and a list of control claims that have no published data.