Industries / Mining and materials / Steel and metals / Foundries and casting
Melting
Melting turns solid metal, from pig iron and scrap to returned gates and risers, into liquid of the right chemistry and temperature for pouring.
5
Milestones achieved, from 1690s to 2004.
1
To watch for: announced, not yet confirmed outside.
2
Open deliverables. Nobody has shipped them.
The road
AchievedWatch forOpen
Achieved
1690s
Coal-fired furnace remelts iron
Sir Clement Clerke adapted the reverberatory furnace, which he had devised for smelting lead and copper and which burned mineral coal, into an "air furnace" for remelting pig iron. The first, at Vauxhall in London, cast grenade shells for William III. It let founders melt iron away from a blast furnace, and the 18th-century foundry trade grew on it and on Darby's green sand.
Credit
Sir Clement Clerke, by the account of Peter King in Historical Metallurgy
1794
The cupola's disputed origin
The cupola, a small shaft furnace in which iron melts in contact with its fuel, became the usual way to melt iron in foundries. Since at least 1914 it has been credited to John Wilkinson and his patent of 1794, but Peter King points out that the patent describes a furnace for smelting iron ore, that René-Antoine de Réaumur described small portable melting furnaces in France in 1722, and that the writer John Farey dated small foundry furnaces called "hells" to about 1780.
LessonA "first" repeated for a century can rest on a patent that describes something else.
Credit
disputed among John Wilkinson, his brother William and earlier French practice
1918
Induction melts without contact
Edwin Fitch Northrup's coreless induction furnace first worked in 1918 at the Palmer Laboratory of Princeton University. A coil fed with high-frequency current, at first from a 20 kHz spark-gap converter, heats metal in a crucible by inducing currents in it, with no flame or electrode touching the metal. His patent application had been turned down for describing "an inoperable device". Motor-generators from 1922 and solid-state power supplies, which Inductotherm launched in 1968, let furnaces grow until supplies of 8,000 kW shipped in the late 1980s and 1990s.
LessonA patent office called the furnace inoperable before it ran.
Credit
Edwin Fitch Northrup, by the account of Graham Cooper, former managing director of Inductotherm Europe, in Foundry Trade Journal (April 2018)
1949
Magnesium makes iron bend
Keith Millis, Albert Gagnebin and Norman Pilling of the International Nickel Company found that a little magnesium kept in cast iron makes its graphite form spheres instead of flakes. Their US patent 2,485,760, granted on 25 October 1949, reports elongation, the stretch before breaking, of usually 2% to 4%, against under 1% for ordinary gray iron. This ductile, or nodular, iron made up 42% of US cast iron shipments in 2003, by a 2004 study for the US Department of Energy.
Credit
Keith Millis, Albert Gagnebin, Norman Pilling; International Nickel Company
2004
Melting's energy measured
A study by J. F. Schifo and J. T. Radia of KERAMIDA Environmental for the US Department of Energy found from published surveys that melting and holding furnaces use 50% to 70% of a foundry's on-site energy. US iron induction melting averaged 796 kWh per ton melted against a theoretical minimum of 352 kWh, and cupola melting 1,414 kWh. The authors also noted a "lack of accurate, process specific, energy usage data".
LessonMost of a foundry's energy goes into the furnace, and the average plant used more than twice the theoretical minimum.
Credit
J. F. Schifo and J. T. Radia, KERAMIDA Environmental, for the US Department of Energy
Watch for
Cupola out, induction in
Beinbauer Casting is replacing the cupola at its foundry in Schwerte, Germany, with an induction melting plant for 25 tonnes of iron an hour: two melting systems with three ABP furnaces and two 8,000 kW converters. ABP Induction, the furnace maker, says the change could cut CO2 emissions by up to 90%, with first liquid iron planned for January 2027.
Achieved whenthe plant runs on induction and a full year of emissions, verified by an outside auditor or shown in a public register, confirms the cut.
Claimed by
ABP Induction, February 2026
Open
01
Cooling curves with nodularity
An open data set of thermal analysis curves from ductile iron melts (the temperature trace of a small sample cup as it freezes), each paired with the melt's chemistry and with the nodularity and nodule count measured on a test casting from the same ladle, plus a baseline model that predicts nodularity from the curve.
The briefCredit · unclaimed02
Checking cupola-to-induction claims
A public table of iron foundries that have replaced, or announced they will replace, a coke-fired cupola with electric induction melting since 2020, setting each claimed cut in CO2 beside the plant's emissions before and after, as shown in public registers.
The briefCredit · unclaimed
Open 01 · the brief
Cooling curves with nodularity
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
An open data set of thermal analysis curves from ductile iron melts (the temperature trace of a small sample cup as it freezes), each paired with the melt's chemistry and with the nodularity and nodule count measured on a test casting from the same ladle, plus a baseline model that predicts nodularity from the curve.
Why it is still open
Published work keeps its data in-house. Maximilian Brait and four co-authors (2021) trained seven kinds of model on 45 production variables, thermal analysis among them, and gave no data. Ronny Quilumba, Patricia Proaño and Oscar Sotomayor (2025) say their raw data "will be made available by the authors", on request. Searches of Zenodo and Hugging Face in November 2026 found no such data set.
Built with what exists
The thermal analysis cups and readers foundries already use; a metallography lab, or image analysis of polished test bars, for nodularity rated to ASTM A247, for which the open-source nodularity.py program on GitHub (repositoryfiles/Nodularity) already rates micrographs by the ISO and JIS methods; Python with scikit-learn; Zenodo for publishing.
First step
Ask one ductile iron foundry for 50 stored cooling-curve files and the matching test-bar micrographs.
Done looks like
At least 500 curves from two or more foundries with matched micrographs, published under an open license, and the baseline's error in nodularity percentage points reported on a foundry held out of training.
Open 02 · the brief
Checking cupola-to-induction claims
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A public table of iron foundries that have replaced, or announced they will replace, a coke-fired cupola with electric induction melting since 2020, setting each claimed cut in CO2 beside the plant's emissions before and after, as shown in public registers.
Why it is still open
The figures in circulation are targets published by the furnace maker. ABP Induction gives a 62% CO2 cut for Saint-Gobain PAM's foundry at Foug, France (July 2024) and up to 90% for Beinbauer at Schwerte (February 2026). This session found no public comparison of such claims with measured emissions.
Built with what exists
The verified emissions that the EU Emissions Trading System publishes for each installation it covers; the European Industrial Emissions Portal; company sustainability reports; a spreadsheet or Python.
First step
Look up Saint-Gobain PAM Foug and Beinbauer Schwerte in the EU emissions trading registry and record what it shows for each year since 2020.
Done looks like
At least 15 conversions listed, each with its claim, the claim's source, and either measured emissions for a year before and a year after or a note that none are public.