BRENNEN

Industries / Food, farming and forestry / Food and beverage processing

Meat, fish and dairy

This work turns animals, fish and milk into cuts, fillets, cheese and other products, by separating, cutting, boning and ripening.

7

Milestones achieved, from 1879 to 2023.

2

To watch for: announced, not yet confirmed outside.

2

Open deliverables. Nobody has shipped them.

In depth

The same ground is charted in more depth, as industries of their own.

The road

AchievedWatch forOpen

Achieved

  1. 1879

    Continuous cream separator

    Gustaf de Laval demonstrated in Stockholm a spinning separator that skimmed cream from milk continuously, at 130 litres an hour, after he and Oskar Lamm patented it in 1878. Spinning the milk, instead of waiting hours for cream to rise, became the standard way dairies separate it.

    alfalaval.com

    Credit

    Gustaf de Laval and Oskar Lamm, whose firm became Alfa Laval

  2. 1882

    Frozen meat crosses the world

    The sailing ship Dunedin, fitted with a coal-powered freezing plant, left Port Chalmers in New Zealand on 15 February 1882 with frozen sheep carcasses and reached London on 24 May. Only one carcass was condemned on arrival, and shipping frozen meat between hemispheres became an industry.

    rnz.co.nz

    Credit

    William Davidson of the New Zealand and Australian Land Company, who proposed the voyage

  3. 1906

    Federal meat inspection

    Upton Sinclair's novel The Jungle and an official inquiry by Charles Neill and James Reynolds exposed conditions in Chicago meatpacking. The United States then passed the Federal Meat Inspection Act on 30 June 1906, which had the Department of Agriculture inspect livestock before and after slaughter.

    Lessoninspection came from public exposure of plant conditions, not from the plants.

    theodorerooseveltcenter.org

    Credit

    Upton Sinclair; Charles P. Neill and James B. Reynolds; Theodore Roosevelt's administration

  4. 2011

    X-ray guided lamb cutting

    Scott Technology installed an X-ray guided primal cutter at the Australian Lamb Company in late 2011. It X-rays each carcass and cuts it into forequarter, middle and hindquarter. By Scott's report, published by Meat & Livestock Australia, it processed over 350,000 head in its first five months with less than four hours of downtime.

    mla.com.au

    Credit

    Scott Technology; Australian Lamb Company; Meat & Livestock Australia

  5. 2016

    Robot boning of pork legs

    Mayekawa's HAMDAS-R takes an X-ray of each pork leg, plans a knife path along the bones, and cuts with six-axis robot arms fitted with a spring-mounted knife that gives like a human wrist. It removes the thigh and shank bones at up to 500 legs an hour and has been installed in Europe.

    jsme.or.jp

    Credit

    Mayekawa

  6. 2023

    Beef boning robot stalls

    In 2018 Teys Australia and Meat & Livestock Australia began a program to build what they called the world's first automated beef boning system, based on lamb automation. It did not reach a commercial system, and in the 2023 final report Teys stepped down as lead and decision-maker.

    Lessonthe report found that running a meat plant to tight commercial deadlines conflicts with the test-and-learn work that new automation needs.

    mla.com.au

    Credit

    Teys Australia; Meat & Livestock Australia; Scott Technology

  7. 2023

    Cultivated chicken cleared

    The US Department of Agriculture granted inspection to UPSIDE Foods and GOOD Meat as of 21 June 2023, after FDA pre-market consultations. The law firm Foley Hoag called them the first two producers cleared to sell meat grown from animal cells in the United States, the second country after Singapore.

    legal500.com

    Credit

    UPSIDE Foods; GOOD Meat, a division of Eat Just

Watch for

  1. Robot scribing of beef carcasses

    AI-guided robots that make the first cuts on beef carcasses, called scribing, are running in production at Kilcoy Global Foods and at Australian Meat Group's Cootamundra plant. Kilcoy says more than 90% of carcasses are cut to within millimetres of the target line. Australian Meat Group's 18-month trial was about halfway through, with no yield figures published.

    Achieved whenthe Cootamundra trial ends and accuracy and yield figures are published by a party outside the companies.

    beefcentral.com

    Claimed by

    Intelligent Robotics, Kilcoy Global Foods and Australian Meat Group, reported through the Australian Meat Processor Corporation, February 2026

  2. A learned chicken deboning cut

    Georgia Tech researchers report a robot control program, trained on examples, not written by hand, that cut real chicken shoulders with up to four times the success and bone avoidance of fixed-path cutting. They call it the first learned program shown to debone a real chicken shoulder.

    Achieved whenthe method runs on a processing line at line speed and someone outside the team reports yield and success.

    arxiv.org

    Claimed by

    Zhaodong Yang, Ai-Ping Hu and Harish Ravichandar, October 2025, accepted to the ICRA 2026 robotics conference

Open

  1. 01

    Grading cheese by sound

    A tapping rig and sound model that grades whole cheese wheels the way expert tappers do, from the sound and vibration of a small hammer.

    The brief
    Credit · unclaimed
  2. 02

    Picking crab meat by robot

    A vision-guided machine that takes the meat out of cooked blue crabs in large pieces and without shell fragments, as hand pickers do.

    The brief
    Credit · unclaimed

Open 01 · the brief

Grading cheese by sound

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A tapping rig and sound model that grades whole cheese wheels the way expert tappers do, from the sound and vibration of a small hammer.

Why it is still open

Every Parmigiano Reggiano wheel is tapped by hand, after at least 12 months of ageing, by one of the Consortium's 25 experts, and more than 4 million wheels are made a year. The Consortium's president said in December 2023 that no machine can replicate the art. A 2025 conference paper describes a CT scanner for the same check and reports no figures for agreement with the experts.

italpress.comndt.net

Built with what exists

An instrumented impact hammer or a solenoid tapper, a contact microphone and an accelerometer, a Raspberry Pi 5 for recording, and a small audio classifier trained in PyTorch.

  1. First step

    Record 50 tapped wheels of a hard cheese at a local cheesemaker or ageing store, with the maker's grade for each, and test whether a simple classifier separates sound wheels from flawed ones.

  2. Done looks like

    On 500 wheels graded by experts, the rig's grade (first, second or third choice) matches the expert's on at least 95%, and each disagreement is checked by cutting or scanning the wheel. The recordings and tally are published.

Open 02 · the brief

Picking crab meat by robot

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A vision-guided machine that takes the meat out of cooked blue crabs in large pieces and without shell fragments, as hand pickers do.

Why it is still open

The University of Maryland's 2022 patent on an automated picker states that "hand picking is still the only widespread method" and that "an efficient crab meat picking machine remains elusive". Searches for this file found research prototypes and patents but no commercial machine.

patents.google.com

Built with what exists

A low-cost arm such as the open SO-101, run with Hugging Face's LeRobot software, a depth camera, and a robot model trained from a few remote-controlled demonstrations, such as NVIDIA's GR00T 2 (see the note "Five demonstrations per task").

  1. First step

    Buy steamed crabs, film a skilled picker's hands from above, and label crab parts in the frames, using the University of Maryland method as the baseline.

  2. Done looks like

    Twenty filmed runs of ten crabs each, published with meat yield per crab and shell fragments per 100 grams, beside a trained hand picker working the same batch.