Industries / Food, farming and forestry / Food and beverage processing
Drinks and bottling
Drinks and bottling is the work of turning grain, fruit, sugar and water into beer, wine, spirits, juice and soft drinks, and filling them into bottles, cans and cartons on fast production lines.
7
Milestones achieved, from 1883 to 2024.
3
To watch for: announced, not yet confirmed outside.
2
Open deliverables. Nobody has shipped them.
In depth
The same ground is charted in more depth, as industries of their own.
The road
AchievedWatch forOpen
Achieved
1883
Brewing from one yeast cell
Emil Christian Hansen at the Carlsberg Laboratory found that wild yeasts were infecting brews, and worked out how to grow a pure culture from a single yeast strain. Carlsberg made it its production strain in 1883, and the Oxford Companion to Beer says this was the first time commercial beer was brewed from a pure culture. Brewers could now repeat the same fermentation every batch, and Carlsberg's owner gave the strain to other breweries free.
Lessonwild yeast spoiled beer, so controlling the starter yeast became a routine step.
Credit
Emil Christian Hansen, Carlsberg Laboratory; J. C. Jacobsen
1892
Crown cap and capping machine
William Painter patented a cheap, single-use metal cap crimped over a lip on the bottle neck. He then patented a machine that filled bottles with syrup and carbonated water and capped them. By 1902 his company's eight-head automatic machine capped 60 to 100 bottles a minute.
Credit
William Painter and his Baltimore crown cork company
1903
Bottles made by machine
Michael J. Owens built what the American Society of Mechanical Engineers (ASME) calls the first commercially successful, fully automatic bottle-making machine. Its later AR model averaged 50,400 bottles a day. In 1913 the National Child Labor Committee judged that the machine did more to end child labour in glass plants than laws had.
Credit
Michael J. Owens, financed by Edward D. Libbey
1959
One-piece aluminium drinks can
On 22 January 1959, a Coors plant in Golden, Colorado produced its first aluminium beverage can, a site ASM International later named a historical landmark. The can had no welded seam, which made it easier to sterilise, and Coors paid one cent for each can returned.
Credit
William K. (Bill) Coors, Joseph Coors and colleagues
1973
Plastic bottle that holds fizz
DuPont was granted US patent 3,733,309 for a bottle of PET, the clear plastic now used for most drinks bottles, stretched in two directions while warm. The stretching makes it strong enough to hold beer and carbonated drinks under pressure. Owens-Illinois produced its first 32-ounce PET bottle in 1976.
Credit
N. Wyeth and R. Roseveare, DuPont
1990
Perrier benzene recall
US FDA tests found Perrier samples above the permitted 5 parts per billion of benzene, and the company recalled 160 million bottles worldwide. The cause given was a filter on the gas line that should have been changed every six weeks but was left in place for up to three months.
Lessona missed maintenance step on one line can put a whole brand at risk, so line upkeep is a food safety control.
Credit
Perrier (recall); US FDA (testing)
2024
Caps tied to bottles
Since 3 July 2024, the EU has allowed plastic-capped drink containers of up to 3 litres on sale only if the caps stay attached during use. Glass and metal containers with plastic caps are excluded. Bottlers selling in the EU had to switch their lines to tethered caps.
Credit
European Parliament and Council, Directive (EU) 2019/904
Watch for
Smoke-taint screen in minutes
Smoke taint is the ashy flavour that wildfire smoke leaves in grapes and wine. Gallo researchers report a method that predicts smoke-taint markers in minutes, where the standard laboratory tests take 24 to 48 hours. It is a light scan called A-TEEM, which records how a sample absorbs light and glows, read by a machine-learning model. The poster gives no sample count and no error figures.
Achieved whenan outside laboratory or a peer-reviewed paper reports the method's error against standard laboratory results on blind samples, or wineries other than Gallo use it routinely.
Claimed by
Qiang Sui and Adam Gilmore, Gallo, June 2026
Paper-fibre bottle factory
Pulpex says it has opened its first commercial plant for wood-pulp bottles, in Glasgow, with capacity of up to 40 million bottles a year. Launch users are Purely Scottish Natural Mineral Water and the cleaning brand smol. The company says the bottles go through household paper and card recycling.
Achieved whendrinks in Pulpex bottles are on general sale, and an independent test or recycler confirms that the bottles are recovered in paper recycling.
Claimed by
Pulpex, October 2026
Every refillable bottle tracked
Each reusable glass bottle gets a permanent Data Matrix code, a small square barcode. Cameras on the filling line read it on every trip and build a history of fills, inspections and rejects. Until now most refill bottle pools have relied on statistical models to estimate losses and trips. The pilot ran on a Coca-Cola Europacific Partners line at Bad Neuenahr in Germany.
Achieved whenthe codes cover a full bottle pool and an outside party publishes measured trips per bottle.
Claimed by
Vetropack, Coca-Cola Europacific Partners and Myneral Labs, August 2026
Open
01
Measuring recycled plastic in bottles
A bench test that estimates what share of a finished PET drinks bottle is recycled plastic, from light spectra of the bottle wall, without relying on the supplier's paperwork.
The briefCredit · unclaimed02
Fizz loss in fibre bottles
An open shelf-life bench that tracks carbon dioxide loss in fibre-based bottles against PET and glass for 12 weeks, with the method and raw data published.
The briefCredit · unclaimed
Open 01 · the brief
Measuring recycled plastic in bottles
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A bench test that estimates what share of a finished PET drinks bottle is recycled plastic, from light spectra of the bottle wall, without relying on the supplier's paperwork.
Why it is still open
Recycled-content claims are checked through chain-of-custody records, and UL Solutions says auditing that chain is more reliable than testing. A June 2025 study from Jinan University and the Guangzhou Customs Technology Center detected recycled content down to 10% using ultraviolet and visible light and machine learning. The article on it notes an "absence of cost-effective, reliable methods" and says a fully quantitative model still needs work.
Built with what exists
A benchtop infrared or ultraviolet-visible spectrometer of the kind university core laboratories usually have, scikit-learn for the models, and reference films pressed from virgin PET pellets and recycled PET flake mixed at known ratios. Known ratios matter because a printed claim may be a company-wide average, not what is in that bottle.
First step
Buy 20 bottles from brands that print a recycled-content figure, book an hour on a university infrared spectrometer, and test whether a simple model separates the 0% and 100% bottles.
Done looks like
A public model and raw spectra that, on at least 50 bottles or films it was not trained on, estimate the recycled share within 5 percentage points, including at 0% and 100%. Another laboratory reruns it and gets the same result.
Open 02 · the brief
Fizz loss in fibre bottles
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
An open shelf-life bench that tracks carbon dioxide loss in fibre-based bottles against PET and glass for 12 weeks, with the method and raw data published.
Why it is still open
In November 2025 Carlsberg's head of sustainability said the company had still not found the right plant-based barrier for its Fibre Bottle. Paboco, a paper bottle maker, has said a thin polyethylene lining "does not work well with carbonated drinks". Pulpex's first commercial bottles hold still water and laundry liquid. No independent published carbon dioxide retention data for fibre bottles turned up in searches for this file.
Built with what exists
A piercing pressure gauge and thermometer of the kind brewers use to check carbonation, a 0.01 g balance, a temperature-controlled cabinet, and a Raspberry Pi data logger.
First step
Ask Pulpex and Paboco for sample bottles, buy matching PET and glass controls, and write the protocol. Keep to normal soft-drink carbonation and store the bottles in a closed crate in case a wall fails.
Done looks like
Weekly carbon dioxide readings for at least 10 bottles each of three bottle types over 12 weeks at a stated temperature, reporting the week each type lost 15% of its starting carbon dioxide, with all data public.