Industries / Construction and property / Commercial and residential construction / Flooring
Vinyl and linoleum
Resilient flooring installers lay linoleum and vinyl as sheets, tiles and planks, either glued to a prepared subfloor or floated on click joints, and where water and germs must be kept out they weld the seams of sheet floors shut with a melted plastic rod.
5
Milestones achieved, from 1863 to 2015.
1
To watch for: announced, not yet confirmed outside.
2
Open deliverables. Nobody has shipped them.
The road
AchievedWatch forOpen
Achieved
1863
Linoleum patented
Frederick Walton found that linseed oil, oxidised until it went solid, could replace costly rubber. He mixed it with cork or wood meal, resin and pigment and pressed it onto jute cloth. Grace's Guide records his patent of 1860 on oxidising the oil, an 1863 patent for "improvements in the manufacture of fabrics for covering floors", his first linoleum works at Staines in 1863, and the patent's expiry in 1877.
Credit
Frederick Walton
1974
Armstrong drops linoleum
Armstrong Cork opened a plant in Lancaster, Pennsylvania, in 1908 to make linoleum. LancasterHistory says it kept making linoleum until 1974, and BuildingGreen gives 1975 for the factory's closing. Armstrong moved to vinyl and spent, in BuildingGreen's words, "years of fighting linoleum as a competitor to its vinyl flooring products", then went back into linoleum in 1998 by buying the maker DLW.
Lessonthe older material did not die out; the leading US maker returned to it 24 years later.
Credit
Armstrong Cork Company, named Armstrong World Industries from 1980
1994
Seams welded shut
ASTM's practice for sealing resilient flooring seams by heat welding, F1516, dates from 1994, its earliest listed version. The installer cuts a groove half to two-thirds of the way through the sheet along the seam, melts a plastic rod into it with a heat welder, and trims it flush. INSTALL's executive director wrote in 2026 that heat welding is often required in operating rooms, laboratories and patient rooms, that a failed seam is "a potential infection reservoir", and that trimming in a single pass leaves a hollow that holds dirt and moisture.
Lessonin a hospital, the floor is only as clean as its weakest seam.
Credit
ASTM Committee F06
2012
Waterproof core, click edges
US Floors filed a patent in October 2012 (US 9,156,233, granted October 2015) for planks with a waterproof extruded core of at least 55% wood, bamboo or cork dust and at least 20% PVC or HDPE plastic, a vinyl or other decorative top layer, an optional cork or foam backing, and click edges, so the floor floats without glue. The patent says moisture weakens the adhesives under vinyl and damages the fibreboard core of laminate. In 2016 Floor Covering News reported a third patent for the product, COREtec, that widened the claims to any plastic composite core, including ones filled with powdered limestone, and the company said it had licensed the patents to others.
Credit
Piet V. Dossche and Philippe Erramuzpe, US Floors; the patent is now assigned to Shaw Industries Group
2015
Phthalates and recycled scrap
In April 2015 the Ecology Center's HealthyStuff.org lab reported that 38 of 65 vinyl floor tiles (58%) bought from US retailers contained phthalates, plasticisers that interfere with hormones, and a companion Healthy Building Network study found lead, cadmium and phthalates coming back into new floors through cheap recycled vinyl. Home Depot had already pledged to phase out phthalates by the end of 2015; Lowe's (May 2015), Menards (July 2015) and Lumber Liquidators (November 2015) followed, and Lumber Liquidators and Floor & Decor also set 100 parts-per-million limits for lead. In 2018 the same groups retested 26 tiles: none held phthalates above the screen's limit of about 1%, most used the non-phthalate plasticiser DOTP, and the lead, antimony and bromine from electronics waste found in 2015 backings had nearly gone.
Lessonrecycled content can carry old hazards into a new floor unless someone tests it.
Credit
Ecology Center, Healthy Building Network, Toxic-Free Future
Watch for
Robot laying vinyl tile
Human Friendly Robotics says its autonomous robot, Tyler, lets installers work "8X faster", and that it has worked on dozens of job sites around New York City and in Puerto Rico, including schools, malls and government buildings. The robot places the tiles while installers keep the cuts, edges and quality checks. The company signed a three-year contract worth up to $4 million with Flooring Concepts of NJ, covering at least 15% to 40% of that firm's luxury vinyl tile work, paid per square foot installed.
Achieved whenFlooring Concepts or another outside party publishes measured square feet per hour, with and without the robot, on the same kind of job.
Claimed by
Human Friendly Robotics, October 2026
Open
01
Grading heat welds by camera
A camera-and-model tool that grades a finished heat-welded seam from close-up photos, looking for a groove that is off centre, too shallow, under-filled, scorched or trimmed hollow, checked against pull tests on the same seams.
The briefCredit · unclaimed02
The water-drop test, measured
A phone tool that films the water-drop porosity test on a concrete subfloor and reports how fast the drop soaks in and how far it spreads. Porosity decides which primer and adhesive go under a resilient floor and how long the adhesive stays workable.
The briefCredit · unclaimed
Open 01 · the brief
Grading heat welds by camera
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A camera-and-model tool that grades a finished heat-welded seam from close-up photos, looking for a groove that is off centre, too shallow, under-filled, scorched or trimmed hollow, checked against pull tests on the same seams.
Why it is still open
INSTALL's March 2026 guide says seams are accepted on "visual acceptance criteria" and describes no strength check. A web search and a Crossref literature query found patents on welding rods and nozzles and studies of welded seams in PVC-coated fabric, but nothing that inspects flooring seams automatically.
Built with what exists
A hand heat welder and rod used on new sheet-vinyl offcuts at a bench, with gloves; a phone with a clip-on macro lens; a pull rig built from a clamp and a digital crane scale, or a university tensile tester; an image classifier trained in PyTorch.
First step
Weld 20 seams on offcuts, half with deliberate faults (off-centre groove, shallow groove, single-pass trim), then photograph and pull each one.
Done looks like
100 seams photographed and then pulled to failure, and on a held-out set of 30 the model's weak-or-strong call matches the pull result on at least 25.
Open 02 · the brief
The water-drop test, measured
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A phone tool that films the water-drop porosity test on a concrete subfloor and reports how fast the drop soaks in and how far it spreads. Porosity decides which primer and adhesive go under a resilient floor and how long the adhesive stays workable.
Why it is still open
ASTM F3191 calls its method "a qualitative assessment" of whether a substrate is porous: the installer watches a drop of water and judges it, and the size, shape and colour of the drop are read by eye. Web and Crossref searches found no work that measures this field check by camera.
Built with what exists
A phone on a small tripod; a pipette; OpenCV; Karsten tubes, small glass tubes stuck to the surface that show how much water soaks in over time. Tests are done on new concrete only, never on old adhesive residue, which can contain asbestos.
First step
Film 20 drops on three new pavers, one smooth-troweled, one ground and one sealed, while timing each with a stopwatch.
Done looks like
50 test spots on at least five new concrete surfaces, where the tool's porous or non-porous call matches two experienced installers on at least 45 spots and its soak-in times rank the spots in nearly the same order as the Karsten tube readings (Spearman correlation of 0.8 or more).