Industries / Construction and property / Commercial and residential construction / Fencing
Materials
Making the wire, mesh, boards, panels and posts that fences are built from, and writing the standards that say what each must be.
5
Milestones achieved, from 1844 to 2019.
1
To watch for: announced, not yet confirmed outside.
2
Open deliverables. Nobody has shipped them.
The road
AchievedWatch forOpen
Achieved
1844
Wire netting by machine
Charles Barnard, a Norwich ironmonger who had been making wire netting by hand, built a hand-worked machine that wove it instead, using the principles of the weaving looms common in the city. The Museum of Norwich, which holds and displays the machine, calls it "the first of its kind". By 1887 his firm, Barnard, Bishop and Barnards, was selling netting from later machines "to countries as far afield as Australia".
Credit
Charles Barnard
1973
The last wrought iron forge
Wrought iron, made by stirring molten iron in a "puddling" furnace, was the metal of old railings and gates; mild steel had almost completely replaced it in building by the end of the 1800s, by the account of Ireland's heritage advisers. The last works in the world to make puddled wrought iron, Thomas Walmsley's Atlas Forge in Bolton, England, stopped production in 1973, according to Designing Buildings Wiki. Since then genuine wrought iron has come only from recycled stock, and mild steel is "the most common substitute material for the repair and replication" of old ironwork.
LessonMild steel resists corrosion less well than historic iron, so mild steel replicas and repairs are likely to rust faster than the originals they replace.
Credit
Thomas Walmsley and Sons
1994
A standard for vinyl fence
ASTM International's fence committee, F14, issued specification F964 in 1994 for rigid PVC profiles, the hollow plastic shapes extruded to make the posts, rails and pickets of vinyl fences for farms, businesses and homes. PVC (polyvinyl chloride) is the plastic sold as vinyl. The standard sets material properties, dimensional tolerances, extrusion quality and weatherability, with color-hold guidelines in an appendix, so different makers' fence can be judged by the same tests.
Credit
ASTM Committee F14
2009
Fences rated against attack
ASTM F2781, whose earliest edition is dated 2009, rates security fences by attacking them with a fixed list of hand tools at three threat levels (low, medium and aggressive), with a limited test against handgun and rifle fire and a test of a 4,000 lb vehicle at 20 mph. A buyer guarding a utility, border or depot can ask for a tested rating instead of a wire gauge and mesh size.
Credit
ASTM Committee F14
2019
Posts from milk bottles
Future Post, founded by Waiuku fencer and farmer Jerome Wenzlick in New Zealand, began selling fence posts made from waste plastic such as milk bottles, bread bags and wrapping in 2019, RNZ reported. By 2021 farms and vineyards including Chard Farm and Cloudy Bay had them in the ground (NZ Herald), and in 2024 Manawatū District Council began sending the plastics it collects to the firm, whose manager said one 125 mm by 1.8 m post holds the equivalent of 250 milk bottles and 1,100 bread bags.
Credit
Jerome Wenzlick, Future Post
Watch for
Plastic posts that outlast timber
Future Post says its posts are "as strong as timber but with added flexibility", will not split, rot or crack, and are "designed to last for decades"; in 2021 its founder put their life at 50 years or more.
Achieved whena laboratory or field trial run by someone other than the maker publishes strength, creep and weathering results for the posts after several years in the ground beside treated timber.
Claimed by
Future Post, June 2026
Open
01
Life test for plastic posts
An independent, published test of recycled-plastic fence posts from at least three makers, side by side with treated pine. Measure bending strength and stiffness when new, after artificial weathering, and after a year in the ground holding tensioned fence wire, and measure creep (the slow bending of plastic under a steady load) every month.
The briefCredit · unclaimed02
Zinc on store-bought fence wire
A survey of the zinc coating on fence wire, woven-wire fabric and chain-link fabric sold in farm and hardware stores, measured against the coating class printed on each label.
The briefCredit · unclaimed
Open 01 · the brief
Life test for plastic posts
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
An independent, published test of recycled-plastic fence posts from at least three makers, side by side with treated pine. Measure bending strength and stiffness when new, after artificial weathering, and after a year in the ground holding tensioned fence wire, and measure creep (the slow bending of plastic under a steady load) every month.
Why it is still open
The long-life figures come from the makers. Future Post's founder estimated "50-plus years" and said the posts would "more than likely last 10 times that" (NZ Herald, 2021), and the firm's 2026 material says they are "as strong as timber". A search found US highway agency tests of recycled plastic posts from earlier decades, but no side-by-side test of today's soft-plastic posts against timber under wire load.
Built with what exists
Posts bought from makers in New Zealand, Australia, the UK or the US, and treated pine posts from a farm store; a university materials lab's universal testing machine for three-point bending under ASTM D6109, the bending method for plastic lumber; a UV weathering cabinet of the QUV type; dial gauges or a low-cost laser distance sensor to log creep; a short test fence strained to a measured wire tension.
First step
Buy five posts from each of three makers and five treated pine posts, and book time on a university testing machine for the first bending tests.
Done looks like
Results for at least 40 posts (10 from each of three makers and 10 treated pine) at three ages, a year of creep curves, and the raw data and method published.
Open 02 · the brief
Zinc on store-bought fence wire
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A survey of the zinc coating on fence wire, woven-wire fabric and chain-link fabric sold in farm and hardware stores, measured against the coating class printed on each label.
Why it is still open
ASTM specifications set coating types and grades for woven-wire fence fabric (A116) and zinc-coated chain-link fabric (A392), and makers check coating in their plants. A search of the Crossref index of papers and standards found work on measuring coating weight on the production line (2025), but no survey of what reaches store shelves compared with its label.
Built with what exists
A magnetic coating thickness gauge such as an Elcometer 456 or a DeFelsko PosiTector 6000 for a quick screen; a commercial testing lab to run the ASTM A90 coating-weight test on samples (the zinc is stripped in acid and the wire weighed before and after); a spreadsheet of brand, store, label class and price.
First step
Buy 10 rolls labeled with the heavier coating class from five stores, and send one sample from each roll to a lab for the A90 test.
Done looks like
At least 100 rolls from at least 10 brands and 20 stores, each read with the gauge at 10 points, one sample in five confirmed by the lab, and the share falling below their labeled class published by brand.