Industries / Finance and business services / Finance and banking / Equipment leasing and factoring
Reselling returned equipment
Reselling is what a lessor does with equipment that comes back at the end of a lease or after a repossession: lease it again, sell it whole, convert it to a new use, or take it apart and sell the parts.
5
Milestones achieved, from 1996 to 2022.
1
To watch for: announced, not yet confirmed outside.
2
Open deliverables. Nobody has shipped them.
The road
AchievedWatch forOpen
Achieved
1996
Used-parts sellers audited
Second-hand aircraft parts are sold with papers that are meant to trace each one to its source. In 1993 the FAA chose voluntary industry oversight of parts distributors over federal regulation, and an industry task force drafted the guidance. In 1996 the FAA published Advisory Circular 00-56, which set up third-party accreditation of distributors; its 2015 revision, AC 00-56B, lists the traceability documents an accredited distributor must keep.
Credit
FAA, with a task force that included the Aviation Suppliers Association, the Aeronautical Repair Station Association and the Air Transport Association
2009
Airliners dismantled in a plant
Tarmac Aerosave was founded in 2007 at Tarbes, France, to carry on Airbus's PAMELA research project on aircraft dismantling. In 2009 the joint venture of Airbus, the waste firm Sita, the engine maker Snecma, Aeroconseil, Equip'Aéro and TASC Aviation began dismantling in a 97,000-square-foot site with a hangar that can hold an A380 and storage for up to 20 aircraft. By its own count it received its 1,000th aircraft in 2020 and its 2,000th in 2026.
Credit
Airbus and partners, now Airbus, Safran and Suez
2018
A superjumbo sold as parts
In 2018 the German fund manager Dr. Peters Group, which owned A380s, had VAS Aero Services take apart the first A380 ever designated for teardown and sell its parts as used serviceable material (USM), meaning second-hand parts certified fit to fly. Tarmac Aerosave dates the first recycling of an A380 at its sites to 2019. Dr. Peters later sent four more to VAS, and in April 2025 VAS said a new Airbus contract for three more would bring its total to 13.
Credit
Dr. Peters Group, VAS Aero Services, Tarmac Aerosave
2020
Passenger jets become freighters
A passenger-to-freighter (P2F) conversion gives a mid-life jet a second career carrying parcels. EASA, the EU's aviation regulator, issued the supplemental type certificate (STC), the approval for a change to a certified aircraft design, for the A321P2F in February 2020, and the FAA validated it in July. The first conversion went to its launch customer, Vallair, in September and entered service on 27 October 2020, flown by Qantas for Australia Post.
Credit
ST Engineering, Airbus and their joint venture Elbe Flugzeugwerke (EFW)
2022
Two auctioneers stay apart
Ritchie Bros. agreed to buy Euro Auctions, and in March 2022 the UK Competition and Markets Authority (CMA) referred the deal for an in-depth investigation. It found Euro Auctions the clear leader and Ritchie Bros. the second-largest in UK auction services for heavy construction machinery, and that marketplaces, listing websites and dealers did not compete with them "on any meaningful level". Ritchie Bros. abandoned the purchase, and the CMA closed its case in May 2022.
Lessonowners and lessors selling used heavy machinery in the UK rely on very few auction channels, so who owns them matters for what sellers pay.
Credit
UK Competition and Markets Authority
Watch for
AI reads lease-return records
An aircraft returned at lease end must come with complete technical records, the paper and digital history of every repair and part, and Aviation Week calls making sure they are complete among the most onerous parts of a return. Avtrac, a London-based aircraft records firm, says a proof of concept adds large language models to its Aircraft Records Control System (ARCS), so teams can query records in plain language and surface compliance risks, and gives no figures. Aviation Week reports that the asset manager Airborne Capital has also partnered with an AI platform for records review.
Achieved whenan outside party compares such a tool with a human records review on real lease returns and publishes the share of record gaps each found and the days saved.
Claimed by
Avtrac, December 2025
Open
01
Lease-end fate, forecast in public
Each month, list the narrow-body airliners that have just left an airline or a lease, found from changes in public aircraft registers. Before anyone knows what happens next, publish for each one a probability that within 18 months it will be leased to another airline, converted to a freighter, or taken apart. Score each forecast when the outcome is known.
The briefCredit · unclaimed02
Read data plates at teardown
A camera station at an aircraft dismantling site that photographs each part as it comes off, reads its part and serial numbers from its data plate, and checks them against the aircraft's records before the part goes into stock for resale. The team only photographs; the site's own staff remove the parts. Measure it against the site's hand log.
The briefCredit · unclaimed
Open 01 · the brief
Lease-end fate, forecast in public
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
Each month, list the narrow-body airliners that have just left an airline or a lease, found from changes in public aircraft registers. Before anyone knows what happens next, publish for each one a probability that within 18 months it will be leased to another airline, converted to a freighter, or taken apart. Score each forecast when the outcome is known.
Why it is still open
Paco Viry and colleagues at ENAC, ISAE-SUPAERO and ONERA (ICAS 2024) modelled narrow-body retirements on the open Planespotters fleet database, not the choice made at lease end. They found inaccurate retirement dates for about 20% of the aircraft they examined, because it marks as "stored" aircraft that have not flown for decades. Searches for this file found commercial forecasts sold by data firms and no public forecasts registered before the outcome.
Built with what exists
The FAA's Releasable Aircraft Database and its deregistered-aircraft file, and other national registers; Planespotters fleet histories, used within its terms; Python with scikit-learn for a simple model by age, type and engine; Gemini Decision 1, which returns probabilities for fixed-answer questions (see the Note "A thousand questions, one pass"), as a second forecaster; dated commits on GitHub to prove when each forecast was made.
First step
Download the FAA database, list the A320-family and 737NG aircraft deregistered in the past 12 months, and record what became of each.
Done looks like
At least 300 aircraft forecast before their outcome and all resolved 18 months later, with a published Brier score (the average squared error of the probabilities) for each forecaster and for a base rate by age and type.
Open 02 · the brief
Read data plates at teardown
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A camera station at an aircraft dismantling site that photographs each part as it comes off, reads its part and serial numbers from its data plate, and checks them against the aircraft's records before the part goes into stock for resale. The team only photographs; the site's own staff remove the parts. Measure it against the site's hand log.
Why it is still open
A part's identity decides whether it can be resold, and EASA says checking records may replace looking at the part only where an airworthiness directive explicitly allows it. Boeing launched a tool in 2024 that reads serial numbers from inspectors' photos of new parts on its production lines, checked against a part dictionary; the March 2026 account of it gives no accuracy figure. Searches for this file found factory tools and vendor claims, but no published accuracy on worn plates of parts taken off retired aircraft.
Built with what exists
A fixed camera with a ring light; open-source text readers such as PaddleOCR or EasyOCR; a vision-language model for hard plates, such as Claude Fable 5.2 (see the Note "Three working devices"); the aircraft's part list from its records; Label Studio for the people checking results.
First step
Photograph 100 data plates at one dismantler, or on retired parts sold as surplus, and run two text readers on them.
Done looks like
At least 1,000 parts from three or more aircraft, with the share of part and serial numbers read correctly against a two-person check, every mismatch flagged for a person rather than filled in, and parts logged per hour compared with hand logging.