Industries / Construction and property / Engineering and architecture
Site investigation
Site investigation is the work of finding out what lies under a site before design: the soil, the rock, the groundwater, and any buried pipes and cables.
6
Milestones achieved, from 1925 to 2018.
1
To watch for: announced, not yet confirmed outside.
2
Open deliverables. Nobody has shipped them.
In depth
The same ground is charted in more depth, as an industry of its own.
The road
AchievedWatch forOpen
Achieved
1925
Soil becomes a science
Karl Terzaghi's book Erdbaumechanik auf bodenphysikalischer Grundlage, "earthwork mechanics on a basis of soil physics", was published in Vienna in 1925, and the international soil mechanics society, ISSMGE, calls it the birth of modern soil mechanics. The first international conference on the subject met at Harvard in 1936, with 206 delegates from 20 countries.
Credit
Karl Terzaghi, who did the research at Robert College in Istanbul
1928
St. Francis Dam fails
The two-year-old St. Francis Dam near Los Angeles failed on the night of 12 March 1928. California's dam safety agency says more than 450 people died and the US Geological Survey says at least 431; a state commission reported that the dam was "poorly constructed and located on a geologically unstable site", though the USGS notes the cause is still debated.
LessonSince then the state must approve the plans for new dams under its jurisdiction.
Credit
the California Legislature, which created the state's Dam Safety Program on 14 August 1929
1963
Vajont landslide
On 9 October 1963 about 260 million cubic meters of rock slid from Monte Toc into the reservoir behind Italy's Vajont Dam, and the wave it raised killed almost 2,000 people, by the count of the historian Wilko Graf von Hardenberg. He writes that the dam "had been built without due consideration of geological reports" and that the reservoir was filled "well in excess of safety regulations."
LessonSmaller landslides had already happened in 1960, soon after the dam was finished, so the warning signs were in the ground before the disaster.
Credit
the historian Wilko Graf von Hardenberg, for the account
2001
Pisa's tower stabilized
The Leaning Tower of Pisa closed in 1990, when the Italian government appointed an international committee to save it. From February 2000 crews removed soil from under the tower's north side through 41 drilled holes, a method called underexcavation, and the tower reopened in December 2001; by mid-2002 its tilt had dropped by 1,880 arc seconds, about 10% of its 1993 maximum.
LessonMonitoring from 2003 to 2008 showed the tower still turning slowly north, at under 0.2 arc seconds a year, rather than leaning further.
Credit
the international committee, whose work John Burland, Michele Jamiolkowski and Carlo Viggiani reported
2002
Grading buried utility data
The American Society of Civil Engineers standard ASCE C-I 38-02 sorts information about buried pipes and cables into four quality levels, from D, which comes only from old records or memory, to A, which maps the exact position and depth. Designers can then show on a drawing how far to trust each line. The US Federal Highway Administration promotes the method, and an update, ASCE 38-22, followed.
Credit
the American Society of Civil Engineers
2018
Open national ground data
The Netherlands' National Key Registry of the Subsurface (BRO) came into effect on 1 January 2018. The law requires all municipalities, provinces, water boards and government agencies to submit their subsurface data to one registry that is meant to be free to everyone, covering 24 data types, among them cone penetration tests, in which a probe pushed into the ground records how hard it is to push.
Credit
the Dutch Parliament and the BRO program organization
Watch for
Britain's buried-pipe map
The UK government's National Underground Asset Register (NUAR) is one online map of underground pipes and cables in England, Wales and Northern Ireland. The government says it became operational in December 2025 with data from over 350 asset owners, and projects "economic growth of at least £400 million per annum" and fewer accidental strikes on pipes and cables; the Data (Use and Access) Act of June 2025 puts it into law.
Achieved whenAn independent evaluation, such as one by the National Audit Office or outside researchers, measures fewer strikes or the projected savings.
Claimed by
UK government, December 2025
Open
01
Old borehole logs into data
A reader that turns scanned borehole logs into AGS files, the standard format for ground investigation data in the UK, and a published test of how accurately it reads them.
The briefCredit · unclaimed02
Desk study from public records
A drafting tool for the desk study, the first stage of a ground investigation, in which an engineer gathers geology maps, old maps, borehole records and mining and flood records for a site and lists its ground hazards. Each hazard in the draft is tied to the record it came from.
The briefCredit · unclaimed
Open 01 · the brief
Old borehole logs into data
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A reader that turns scanned borehole logs into AGS files, the standard format for ground investigation data in the UK, and a published test of how accurately it reads them.
Why it is still open
The British Geological Survey holds over 1.4 million borehole records and in October 2020 asked volunteers to convert scanned logs into AGS files by hand, estimating that over 800,000 more logs would become usable once converted. Civils.ai says it has processed over 100,000 boreholes since 2022, and its one accuracy figure comes with no method.
Built with what exists
Scanned records, free to view through BGS GeoIndex; a vision-language model to read them; the free Groundhog Desktop software that BGS suggests to volunteers; a person checking a sample.
First step
Pick 20 scanned logs from one town in GeoIndex, enter five by hand, and run a model over all 20.
Done looks like
500 logs from one area converted, with a person entering 50 of them independently and a published table of field-by-field agreement (depths, soil descriptions, water strikes, test results) of at least 95%.
Open 02 · the brief
Desk study from public records
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A drafting tool for the desk study, the first stage of a ground investigation, in which an engineer gathers geology maps, old maps, borehole records and mining and flood records for a site and lists its ground hazards. Each hazard in the draft is tied to the record it came from.
Why it is still open
A September 2026 paper by Chayan Biswas and colleagues at Swami Vivekananda University proposes only a framework for this, and says preliminary investigation relies on maps, historical reports and engineering judgment, combined in a way that is "often qualitative and discontinuous." This research found no tool that drafts a desk study from public records.
Built with what exists
BGS GeoIndex; historical maps; the Coal Authority's mining maps; Environment Agency flood maps; a web agent to gather them (see the Note "Deleting 80% to start over").
First step
Download three desk studies from one council planning portal and list each hazard with the record it cites.
Done looks like
For 20 UK sites whose desk studies are public in planning applications, a published table of the share of the consultant's hazards that the tool also found, and of hazards the tool listed without a supporting record, with a target of none.