BRENNEN

Industries / Construction and property / Elevator and escalator services

Scheduled maintenance

Scheduled maintenance is the routine visit, under a contract with the building owner, in which a mechanic cleans, lubricates, adjusts and tests a lift or escalator and replaces worn parts before they fail.

6

Milestones achieved, from 1861 to 2007.

1

To watch for: announced, not yet confirmed outside.

2

Open deliverables. Nobody has shipped them.

The road

AchievedWatch forOpen

Achieved

  1. 1861

    A yearly service agreement

    Charles Otis wrote an agreement to "assume the entire charge and responsibility" for maintaining a steam-powered elevator for $780 a year. Otis's own company history calls it the first service agreement.

    otis.com

    Credit

    Charles Otis, Otis Elevator Company

  2. 1901

    Mechanics form a union

    Elevator mechanics met in the Griswold Hotel in Pittsburgh in 1901 and founded the International Union of Elevator Constructors (IUEC), which still trains and represents most union lift mechanics in the United States and Canada. Its apprentices now work beside a mechanic by day and take eight semesters of evening classes, 144 hours a year, run by the National Elevator Industry Educational Program (NEIEP), a training fund shared by the union and employers, before they may sit the Mechanic Exam.

    iuec.orgneiep.org

    Credit

    the IUEC and NEIEP

  3. 1932

    Service outsells new lifts

    Otis began offering formal service contracts across the United States in 1924, and from 1932 its service and modernization work brought in more than its sales of new equipment, by its own history. Maintenance has since been the steadier half of the business: in its annual report to the US Securities and Exchange Commission for 2025, Otis said it maintained about 2.5 million units with 37,000 service mechanics.

    otis.comsec.gov

    Credit

    Otis Elevator Company

  4. 2006

    Counting deaths at work

    The Center to Protect Workers' Rights, now CPWR, counted 173 US deaths from 1992 to 2003 in work on or near elevators, about 14 a year. Of 93 deaths during installing and repairing, 28 were people caught in or between moving parts and 26 were falls. The report called for locking out power during repairs and for treating shafts with working elevators as permit-required confined spaces. CPWR's 2019 follow-up, as reported by Construction Dive, found elevator-related construction deaths rising from 14 in 2003 to 28 in 2016, with a peak of 37 in 2015, and more than 53% from falls.

    LessonMost deaths in lift work come from moving machinery and open shafts, so safe practice starts with cutting the power and guarding the opening.

    elcosh.orgconstructiondive.com

    Credit

    CPWR

  5. 2007

    A cartel reaches maintenance

    The European Commission fined the Otis, KONE, Schindler and ThyssenKrupp groups €992 million for rigging bids, fixing prices and sharing out contracts for the sale, installation, maintenance and modernization of lifts and escalators in Belgium, Germany, Luxembourg and the Netherlands from at least 1995 to 2004. The Commission said the harm could last 20 to 50 years, because maintenance is often done by the company that installed the equipment.

    LessonWhoever installs a lift tends to keep its maintenance for decades, so a rigged installation market also rigs the service market.

    ius.uzh.ch

    Credit

    European Commission, under Competition Commissioner Neelie Kroes

  6. 2007

    A written maintenance program

    The 2007 edition of ASME A17.1, the safety code for elevators and escalators used across the United States and Canada, requires a written maintenance control program (MCP) for each unit: the tasks, intervals, examinations and tests, set by the equipment's age, wear, design, use and surroundings. States adopted it on their own schedules. Colorado required one for every regulated unit by 1 July 2015 and said the program belongs to the owner, so a departing maintenance contractor must leave the documents and five years of records on site.

    sfm.illinois.govops.colorado.gov

    Credit

    ASME A17 committee; state regulators

Watch for

  1. Phone apps plan the rounds

    Mitsubishi Electric Building Solutions says a cloud platform called KEGMIL, built by the Singapore startup FTV Labs, cut the work of drawing up mechanics' assignment plans by about 90% and of writing work reports by about 50% in its own trial before launch. It began using KEGMIL in Singapore in October 2025, citing an aging workforce.

    Achieved whenafter a year of use, a customer, auditor or researcher publishes measured before-and-after times for planning and reporting at a branch that uses it.

    acnnewswire.com

    Claimed by

    Mitsubishi Electric Building Solutions, September 2025

Open

  1. 01

    Test lift maintenance assistants

    A public test of AI assistants on lift maintenance questions. Licensed mechanics write 300 questions about controllers whose manuals are public, covering fault codes, adjustment steps and required tests, each with the correct answer and the manual page that supports it. Run several AI models with and without the manual, and any maker's assistant that agrees to take part, and score each answer for correctness, for whether its cited page supports it, and for unsafe advice such as bypassing a safety circuit. Nobody touches equipment; the test is on paper.

    The brief
    Credit · unclaimed
  2. 02

    Identify parts from photos

    A phone tool that names a lift part, such as a door roller, relay, contactor or circuit board, with its maker and part number, from a photo. Test it on surplus and scrap parts photographed on a bench, not on parts in service.

    The brief
    Credit · unclaimed

Open 01 · the brief

Test lift maintenance assistants

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A public test of AI assistants on lift maintenance questions. Licensed mechanics write 300 questions about controllers whose manuals are public, covering fault codes, adjustment steps and required tests, each with the correct answer and the manual page that supports it. Run several AI models with and without the manual, and any maker's assistant that agrees to take part, and score each answer for correctness, for whether its cited page supports it, and for unsafe advice such as bypassing a safety circuit. Nobody touches equipment; the test is on paper.

Why it is still open

Makers now give technicians AI help, but its results are reported only from their own pilots (see Remote monitoring, Watch for). DiagnosticIQ, a 2026 benchmark from IBM and Rensselaer Polytechnic Institute with 6,690 maintenance questions, covers 16 kinds of building equipment such as air handlers, chillers and pumps, and no lifts. The one public code release found for answering elevator fault questions, a 2026 knowledge-graph pipeline on GitHub, keeps its maintenance records private. No public question set for lifts was found.

arxiv.orggithub.com

Built with what exists

Public controller manuals, such as Smartrise's C4 user manual, GUI manual and predictive maintenance guide; current AI models from Anthropic, Google and OpenAI through their APIs; an agent that quotes the page behind each answer (see the Note "Findings that cite notes"); and cheaper models scored on the same questions (see the Note "The jobs agents repeat").

smartrise.us

  1. First step

    Download the Smartrise C4 user manual, write 30 fault-code questions with page numbers, and have one licensed mechanic check them.

  2. Done looks like

    300 questions, each checked by a second mechanic, released under an open license with 100 held back for later rounds; published scores for at least five assistants, with the share of correct answers, the share whose cited page supports them, and the count of unsafe answers.

Open 02 · the brief

Identify parts from photos

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A phone tool that names a lift part, such as a door roller, relay, contactor or circuit board, with its maker and part number, from a photo. Test it on surplus and scrap parts photographed on a bench, not on parts in service.

Why it is still open

A 2023 Elevator World paper on the right to repair says parts unique to each control platform cause long lead times and large spare stocks, and that parts and manuals may be sold only to authorized networks. Independent companies service about half of the world's service units, by industry estimates that Otis quotes in its 2025 annual report. The only identification tool found is a 2025 hackathon project on GitHub that publishes screenshots but no test set or accuracy.

vdassoc.comgithub.comsec.gov

Built with what exists

A phone camera and a light box; AI models that read images, such as Gemini or Claude, through their APIs; a small model fine-tuned on the photos so it can run on a phone without a connection (see the Note "One GPU to fine-tune"); makers' public parts catalogs for the labels.

  1. First step

    With permission, photograph 100 surplus or scrap parts in an independent contractor's parts room or at a used-parts dealer, and label them.

  2. Done looks like

    1,000 photos of at least 100 different parts, labeled by type, maker and part number and checked by a mechanic; published top-1 and top-3 accuracy for each label, and the photo set released under an open license.