Industries / Construction and property / Commercial and residential construction / Demolition
Reuse and recycling
Taking buildings apart so their parts can be used again, and sorting and crushing what is left into material for new work.
7
Milestones achieved, from 1897 to 2020.
2
To watch for: announced, not yet confirmed outside.
2
Open deliverables. Nobody has shipped them.
The road
AchievedWatch forOpen
Achieved
1897
Wrecking paid by resale
The Chicago House Wrecking Company bought buildings, took them down and sold the parts by mail-order catalog. It paid $80,000 for the buildings of the 1893 World's Columbian Exposition, the Chicago Journal reported in 1896, and by June 1897 had taken down Chicago's old Post Office and Sub-Treasury, a five-story building with stone walls two feet thick. Its 1899 catalog offered that building's iron stairs, vault doors and vault linings, and over 100,000 square feet of marble and encaustic floor tile from it and other buildings the firm had dismantled. Chicago had perhaps a larger wrecking trade than any two other US cities, the Chicago Times-Herald wrote in 1897.
Credit
Chicago House Wrecking Company (A. Harris, F. Harris, Sam H. Harris)
2000
Japan makes sorting law
Japan's Construction Material Recycling Act (Act No. 104 of 2000), enacted in May 2000, requires contractors who demolish a building of more than 80 square meters of floor to sort out and recycle its concrete, asphalt-concrete and wood. The client must file a sorting plan with the prefectural governor seven days before work starts, and demolition firms must register with the prefecture. The Ministry of Land, Infrastructure, Transport and Tourism (MLIT) measured the recycling rate of concrete lumps at 97.3% in fiscal 2008 and 99.3% in fiscal 2012 and 2018.
Credit
Government of Japan; MLIT
2008
Europe sets 70% for rubble
The EU's Waste Framework Directive (2008/98/EC) told member states to raise the re-use, recycling and other material recovery of non-hazardous construction and demolition waste to at least 70% by weight by 2020. The count includes backfilling, the use of waste in place of other material to fill holes such as old quarries or trenches. A 2018 amendment added that states must promote selective demolition, which takes out hazardous substances and reusable materials first, and set up sorting for at least wood, mineral waste (concrete, bricks, tiles, stone), metal, glass, plastic and plaster.
Credit
European Parliament and Council of the EU
2008
Salvaged studs tested
The US Forest Products Laboratory (FPL) tested the strength and stiffness of Douglas-fir 2-by framing lumber recovered from deconstructed buildings, noting that "little technical information exists" on such wood, to give a basis for recognizing it in grading rules and design standards. In 2012 Robert Falk and colleagues wrote that reclaimed lumber was still "not formally recognized in our grading or engineering design standards," which confuses buyers, builders and building officials.
Lessontest data alone did not put reclaimed wood into the rule books.
Credit
Robert H. Falk, Derek G. Maul, Steven M. Cramer, James Evans, Victoria Herian; USDA Forest Products Laboratory
2016
Portland requires deconstruction
Portland, Oregon, adopted an ordinance in July 2016, in force from 31 October 2016, requiring houses and duplexes built in 1916 or earlier, or listed as historic, to be dismantled by a certified deconstruction contractor instead of demolished by machine. In 2018 it widened the rule to houses built in 1940 or earlier. The city calls it the first such ordinance in the US. By the city's count, 765 residential structures were deconstructed from 2016 to 2026 and over 4.7 million pounds of lumber recovered for reuse. An average house gives about 4 tons of materials for reuse and about 20 tons for a recycling facility, a reuse rate of about 17 to 20% for materials above the foundation.
Credit
City of Portland Bureau of Planning and Sustainability
2016
A Brussels salvage cooperative
From 2013 to 2016 the Brussels design practice Rotor ran experiments in taking components out of large demolition sites, such as the interiors of the Générale de Banque headquarters, and in storing them and finding buyers. In December 2016 the work became a separate cooperative company, Rotor Deconstruction (RotorDC), which salvages and sells building components such as doors, parquet, terrazzo and glazing from Brussels buildings.
Credit
Rotor vzw/asbl; RotorDC
2020
The 70% met by backfill
In a briefing published on 16 January 2020, the European Environment Agency (EEA) found that although EU countries report high recovery of construction and demolition waste, "C&DW recovery is largely based on backfilling operations and low-grade recovery, such as using recycled aggregates in road sub-bases."
Lessona target that counts backfilling can be met without keeping materials at anything like their former use.
Credit
European Environment Agency
Watch for
India's recycled-content quotas
India's Environment (Construction and Demolition) Waste Management Rules, 2025, dated 2 April 2025 and in force from 1 April 2026, set recycling targets for producers of construction and demolition waste that start at 25% in 2025–26 and reach 100% in 2028–29. They also require recycled or processed demolition waste to make up at least 5% of materials in construction and road projects from 2026–27, rising by 2030–31 to 25% for buildings and 15% for roads, according to the Council on Energy, Environment and Water (CEEW).
Achieved whenthe Central Pollution Control Board or an independent body reports that projects met the 2026–27 minimum for recycled content.
Claimed by
India's Ministry of Environment, Forest and Climate Change, April 2025
Grading demolition timber on site
On wood from a French social-housing deconstruction project led by the landlord Vosgelis, Lemaitre, Bléron, Simon and Méausoone report that stiffness measured by vibration came within 15% on average of bending-test values, against 35% for ultrasound, and that a portable bench built for the deconstruction site came within 13%. They say this extends the machine-grading standard NF EN 14081-2 to demolition wood, though the standard needs adapting for it.
Achieved whenanother laboratory reproduces the method on a different batch, or a grading body accepts strength classes assigned with it.
Claimed by
the authors, in a preprint of April 2025 and in the journal Recycling in November 2025
Open
01
Salvage forecast checked against haul
A tool that takes a phone walk-through video of a house due for deconstruction and forecasts what the crew will recover: counts of doors, windows, cabinets and fixtures, square meters of flooring and board feet of framing lumber. Each forecast is then scored against what the crew actually took out.
The briefCredit · unclaimed02
Grade reclaimed studs without breaking
An on-site check that gives a strength grade to reclaimed 2-by framing lumber from a tap-and-listen vibration reading plus photos of knots, splits and nail holes, tested against lab bending tests of the same pieces, and written up as a proposal a US grading agency could review.
The briefCredit · unclaimed
Open 01 · the brief
Salvage forecast checked against haul
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A tool that takes a phone walk-through video of a house due for deconstruction and forecasts what the crew will recover: counts of doors, windows, cabinets and fixtures, square meters of flooring and board feet of framing lumber. Each forecast is then scored against what the crew actually took out.
Why it is still open
The nearest work, a 2026 diploma thesis at TU Wien by Matthias Schuch, inventoried reusable components from videos of eleven Vienna apartment buildings. Its detectors scored low (an AP50 of 0.046 for Mask R-CNN), the AI valued about €1,275 of components per building against about €1,925 for human experts, and it was checked against expert valuations, not against what was later salvaged. Portland already requires certified deconstruction for older houses and counts about 3,027 board feet of lumber and 4 tons of reused material per house, so recovered quantities exist to score against.
Built with what exists
Smartphone video; an object detector such as Ultralytics YOLO11 fine-tuned on labeled frames, or a vision-language model such as Claude or Gemini to list and count items; Portland's certified deconstruction contractors and its salvage retailers, such as the ReBuilding Center; Python.
First step
Ask two of Portland's certified deconstruction contractors to let you film three houses before work begins and to share their salvage tallies afterward.
Done looks like
Forecasts for at least 20 houses filmed before work starts, set beside each crew's recovered tally, with the median error in board feet and in item counts published together with the videos and tallies.
Open 02 · the brief
Grade reclaimed studs without breaking
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
An on-site check that gives a strength grade to reclaimed 2-by framing lumber from a tap-and-listen vibration reading plus photos of knots, splits and nail holes, tested against lab bending tests of the same pieces, and written up as a proposal a US grading agency could review.
Why it is still open
In 2012 Forest Products Laboratory researchers wrote that reclaimed lumber is not formally recognized in US grading or design standards. The vibration method reported in France in 2025 was tested on one batch from one project and needs a reference batch for each new lot, by its authors' account. A search found no on-site grading method in use for reclaimed framing in the US.
Built with what exists
A handheld resonance timber grader, such as Brookhuis's MTG, or a microphone and free spectrum software to read the tap frequency; a phone camera and an image model to measure knots; a university timber lab's testing machine run to ASTM D198; studs bought from Portland deconstructions, where over 4.7 million pounds of lumber have been recovered.
First step
Buy 30 reclaimed studs from a salvage retailer, record their tap frequencies, and ask a university timber lab for a day of bending tests.
Done looks like
At least 200 studs from at least 10 houses, each measured on site and then broken in the lab, with predicted grade set against measured stiffness and bending strength, and the share of pieces graded too high published with all data.