Industries / Industrial equipment and services / Industrial services / Crane and rigging
Slings and rigging
Rigging is the gear and the know-how that join a load to the crane hook: wire rope, chain and fabric slings, shackles, hooks and lifting beams, chosen and attached so the load hangs level and no part is overloaded.
4
Milestones achieved, from 1834 to 2008.
1
To watch for: announced, not yet confirmed outside.
2
Open deliverables. Nobody has shipped them.
The road
AchievedWatch forOpen
Achieved
1834
Iron wire replaces hemp
Wilhelm August Julius Albert, a senior mining official in the Harz mountains of Germany, made a rope of twisted iron wires to hoist ore at the Caroline mine near Clausthal in 1834, in place of hemp ropes and iron chains that wore out quickly. After it proved itself in the mine's deep shafts, the other Harz mines adopted it, and it spread to many other uses. OIPEEC, an international body that studies the endurance of wire rope, says it is generally accepted as the first serviceable wire rope used in a technical application.
Credit
Wilhelm August Julius Albert
1975
Slings checked every day
On 27 June 1975 OSHA published its rule for slings used in US general industry, 29 CFR 1910.184. In its current text it requires a competent person chosen by the employer to inspect every sling and its fittings each day before use and to take damaged ones out of service at once. It sets removal limits, such as ten randomly spread broken wires in one rope lay (the length in which a strand makes one full turn around the rope) or a hook opened more than 15%, and it requires a thorough inspection of alloy steel chain slings at least every 12 months, with a record kept.
Credit
OSHA
2003
Sunlight weakens web slings
A 2003 study by the Web Sling & Tie Down Association (WSTDA), a US trade group, measured how ultraviolet light from the sun weakens flat synthetic slings. As reported by the sling maker Slingmax, polyester web slings lost up to 30% of their strength in their first 12 months outdoors and then leveled off, while nylon web slings lost up to 50 to 60% after 36 months with no sign of leveling off.
LessonA synthetic sling can lose strength without any damage you can see, so its age and where it was kept matter.
Credit
Web Sling & Tie Down Association
2008
Four slings instead of eight
On 15 March 2008 a tower crane about 250 ft (76 m) high collapsed at 303 East 51st Street in Manhattan, killing six workers and a person in a nearby apartment. Workers were raising a collar, a steel frame that ties the crane's mast to the building, at the 18th floor; the four 2-inch polyester slings holding it all failed, and the falling collar struck the collars below. OSHA found the slings were choked around sharp-edged mast legs with no padding, one was already worn and should have been discarded, and each half of the collar hung from two points instead of the four the crane maker specified. Slings rigged that way in tests OSHA commissioned at Lehigh University failed at about 7,100 lb (3.2 tonnes) under sustained load, against about 20,000 lb expected of a properly choked sling. In 2011 New York City revoked the rigger and crane licenses of William Rapetti, the licensed rigger, after an administrative judge found that his rigging caused the collapse.
LessonA sling's rating holds only when it is rigged as its maker intends, padded against edges and inspected before use.
Credit
OSHA Directorate of Construction (Mohammad Ayub, PE); Lehigh University's ATLSS research center; New York City's Department of Buildings and Department of Investigation
Watch for
Slings with built-in pins
Two Australian makers, United Sling Co and Black Snake, launched LiftLink, which they call the world's first Australian-designed and Australian-made round sling of HMPE with steel thimbles and a captive pin built in, so no separate shackle is needed. HMPE (high-modulus polyethylene) is a fiber far lighter than steel for its strength. They say it cuts rigging weight and setup time; the design is patent-pending, and each sling is proof-tested and carries an RFID tag (a radio chip that identifies it).
Achieved whenan independent test house publishes break tests of the built-in pin and thimble, or a crane firm reports using it on named lifts.
Claimed by
United Sling Co and Black Snake, December 2025
Open
01
Photo checks for textile slings
A phone app and image model that photograph a polyester web sling or round sling, find the damage that calls for removal (cuts, holes, broken stitching, burns, knots, faded or discolored fabric, paint or marker pen, a missing or unreadable tag), read the tag, and say keep or discard with the reason, for a qualified inspector to confirm.
The briefCredit · unclaimed02
Test the four-leg rule
A bench-scale test and an open calculator for four-leg sling sets. Model frames of about 20 kg, one stiff and one flexible, hang a few centimeters above a bench from a fixed frame on four short legs of small chain or wire, each with a load cell; leg lengths are made unequal by known amounts and the center of gravity is moved. A Python model predicts each leg's share from the geometry, the stretch of each leg and the stiffness of the frame, and the two are compared.
The briefCredit · unclaimed
Open 01 · the brief
Photo checks for textile slings
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A phone app and image model that photograph a polyester web sling or round sling, find the damage that calls for removal (cuts, holes, broken stitching, burns, knots, faded or discolored fabric, paint or marker pen, a missing or unreadable tag), read the tag, and say keep or discard with the reason, for a qualified inspector to confirm.
Why it is still open
Image models for steel wire rope are well studied, for example for cableway ropes (Zhang and colleagues, Sensors, 2021) and elevator ropes (REL-YOLO, 2025), but a web search and a Crossref search found no published model or image set for textile slings. Mazzella, a US rigging firm, broke field-damaged web slings on its test bed in a March 2026 video to show how melted, knotted and sun-worn slings fail, without publishing a tally of strength against appearance. The discard rules are visual and written down: New South Wales's rigging guide makes a missing tag, broken stitching, knots, marker or paint, and cuts grounds for immediate discard. A round sling's load-bearing core sits inside a cover, so photos alone can miss damage to it, which is why the test below ends in break tests.
Built with what exists
A phone camera and a light box; an object-detection model such as Ultralytics YOLO, or a vision-capable AI model; labels from two qualified sling inspectors; the pull-test machine of an accredited test house.
First step
Ask a sling maker or hire depot for 50 slings already rejected at inspection, and photograph each from both sides with its rejection reason.
Done looks like
300 retired slings from hire depots photographed and judged by the model and by two qualified inspectors; 60 of them pulled to destruction in an accredited test house; published agreement between model and inspectors, and how often each said "keep" for a sling that broke below the strength its rating requires.
Open 02 · the brief
Test the four-leg rule
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A bench-scale test and an open calculator for four-leg sling sets. Model frames of about 20 kg, one stiff and one flexible, hang a few centimeters above a bench from a fixed frame on four short legs of small chain or wire, each with a load cell; leg lengths are made unequal by known amounts and the center of gravity is moved. A Python model predicts each leg's share from the geometry, the stretch of each leg and the stiffness of the frame, and the two are compared.
Why it is still open
OSHA's guidance tables give a four-leg bridle sling the same rated load as a three-leg one, because the four legs rarely share the load equally, and New South Wales's rigging guide warns that uneven loading reduces a sling's capacity. David Duerr (AISC Engineering Journal, 1989) computed with structural models that a pair of opposite slings can take more than 80% of the load on loads that twist easily and all of it on very rigid ones, and that the skew factor then set by DNV, the Norwegian classification society, understated the split. That was a computer study; a web search found no published measurements of leg loads against a known length mismatch. Free multi-leg sling calculators on GitHub (2026) work out leg tensions from sling angles alone, with the number of legs assumed to carry the load set by the user.
Built with what exists
Four S-type load cells with HX711 amplifiers or a data logger; two welded model frames and a bench test stand; Python and NumPy; optionally an open finite-element tool such as FreeCAD FEM to repeat Duerr's analysis on the model frames.
First step
Build the stiff frame with four legs of 4 mm chain, weigh it, and record leg loads with all legs equal and then with one leg 1% shorter.
Done looks like
100 runs across five leg-length mismatches, four center-of-gravity positions and both frames; measured leg loads published next to the model's predictions and Duerr's, with the most heavily loaded pair's share given as a percentage of the total; data and code released.