BRENNEN

Industries / Industrial equipment and services / Industrial services / Crane and rigging

Inspection and operator certification

Inspection and operator certification check that cranes are fit to work and that the people running them have shown, by exam or license, that they can do so safely.

5

Milestones achieved, from 1916 to 2018.

1

To watch for: announced, not yet confirmed outside.

2

Open deliverables. Nobody has shipped them.

The road

AchievedWatch forOpen

Achieved

  1. 1916

    A crane safety code begins

    In December 1916 an ASME committee on protecting industrial workers presented an eight-page Code of Safety Standards for Cranes to the society's annual meeting. ASME formed its B30 committee for cableways, cranes, derricks, hoists, hooks, jacks and slings in June 1925, and the first full volume, the Safety Code for Cranes, Derricks, and Hoists (B30.2), followed in 1943. Later volumes split inspection in two: the 2005 edition for overhead and gantry cranes calls for frequent inspections, daily to monthly, by the operator without written records, and periodic inspections, quarterly to yearly, by a designated person who keeps written records.

    asme.orglaw.resource.org

    Credit

    American Society of Mechanical Engineers (ASME)

  2. 1995

    Certified by exam

    The National Commission for the Certification of Crane Operators (NCCCO), a nonprofit set up by the US crane industry, was founded in 1995 to certify crane operators by written and practical (hands-on) exams. OSHA recorded in 2010 that NCCCO had examined 65,000 operators, who had taken more than 365,000 exams since 1996, and that sixteen states then required operators to be certified or licensed.

    ccocert.orgfederalregister.gov

    Credit

    NCCCO, now CCO Certification

  3. 2007

    One license across Australia

    The Australian Safety and Compensation Council finalized a national standard for licensing high-risk work in 2007, replacing a 2001 certification standard. It covers crane and hoist operation, dogging (slinging loads and directing the crane operator), rigging and scaffolding, adds operators of self-erecting tower cranes, and gives photo licenses recognized throughout Australia and renewed every five years; all states and territories were to apply it by 1 July 2009. New South Wales now lists 29 classes of high-risk work license, 12 of them for cranes, including separate classes for slewing mobile cranes up to 20, 60 and 100 tonnes and over 100 tonnes.

    safetysolutions.net.ausafework.nsw.gov.au

    Credit

    Australian Safety and Compensation Council, with state and territory regulators

  4. 2010

    A rule written by negotiation

    OSHA's rule for cranes and derricks in construction took effect on 8 November 2010, replacing rules from 1971 that relied on consensus standards of that time, such as ANSI B30.5-1968. It was drafted by a negotiating committee, C-DAC, drawn from crane makers, rental firms, contractors, unions, power line owners and other affected interests, in a process OSHA began in 2002. Employers must check that the ground can carry the crane and its load, assess hazards such as power lines, have the equipment inspected, and, after a four-year phase-in, use operators certified by an accredited testing organization. OSHA estimated 89 crane-related deaths a year in US construction.

    federalregister.gov

    Credit

    OSHA and the Cranes and Derricks Negotiated Rulemaking Advisory Committee (C-DAC)

  5. 2018

    A card is not enough

    OSHA pushed the operator certification deadline from November 2014 to November 2017 and then to November 2018. Its amended rule of November 2018 accepts certification by crane type alone, makes capacity ratings optional, and requires employers to train operators and evaluate each one on the equipment they will run, with written records from 7 February 2019. OSHA wrote that "crane-operator certification alone does not ensure that an operator has sufficient knowledge and skill to safely use all equipment."

    LessonAn exam shows minimum knowledge; the employer still has to check skill on the actual machine.

    federalregister.gov

    Credit

    OSHA

Watch for

  1. British Columbia licenses crane work

    British Columbia said in March 2026 that it will set up a WorkSafeBC licensing and permitting program for the people who oversee crane work, who today need no certificate or license. In July 2026 it said tower and mobile crane operators have one year to register as apprentices or pass the trade certification exam, with the requirement taking effect on 5 July 2027. The province cited seven worker deaths in crane incidents over five years and 373 cranes now operating, up from 261 in 2021; a Crane Safety Table formed in June 2025 had named licensing and permitting as key steps.

    Achieved whenWorkSafeBC issues licenses and permits under the program, and the operator requirement takes effect on 5 July 2027 with a published count of certified operators.

    news.gov.bc.canews.gov.bc.ca

    Claimed by

    Government of British Columbia, March and July 2026

Open

  1. 01

    One table of crane rules

    A public table, for at least 25 countries (and for US states or Canadian provinces where rules differ), of who may operate which crane (license or certificate, issuing body, how long it lasts, how it is renewed), how often cranes must be inspected and by whom, and when load tests are required. Every cell cites the law or standard and the clause, in English and in the original language.

    The brief
    Credit · unclaimed
  2. 02

    A history file per crane

    An open record format for a crane's working life, keyed by maker and serial number: inspections, defects found and fixed, repairs and replaced structural parts, load tests, overloads logged by the crane's own limiter, and incidents. With it, a converter that reads existing inspection reports, typed or scanned, into the format, so a buyer, renter or inspector can see a crane's history from more than one owner.

    The brief
    Credit · unclaimed

Open 01 · the brief

One table of crane rules

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A public table, for at least 25 countries (and for US states or Canadian provinces where rules differ), of who may operate which crane (license or certificate, issuing body, how long it lasts, how it is renewed), how often cranes must be inspected and by whom, and when load tests are required. Every cell cites the law or standard and the clause, in English and in the original language.

Why it is still open

ESTA set out in 2010 to fund a study mapping national rules in Europe, and its 2021 guide to the European Crane Operators Licence (ECOL) still says national rules "range from compulsory to optional and even to no rules at all". ECOL covers only mobile cranes and, by April 2021, had four training institutes and mutual recognition with the Netherlands' TCVT and British Columbia's BCACS. Cranes Today's 2010 country survey is in prose and 16 years old. A 2025 Cranepedia table compares Japan, Germany and China without citing a regulation for each cell. I found no sourced multi-country table.

cranestodaymagazine.comestaeurope.eucranepedia.com

Built with what exists

National regulations and their official translations; a document-reading AI model that translates and extracts each rule with its clause number, with every cell checked by a person; a spreadsheet published as CSV; one reviewer per country, such as a regulator contact or a crane-hire association.

  1. First step

    Fill the table for five jurisdictions already covered in this file, the US (federal OSHA), New South Wales, British Columbia, Germany and the UK, and publish the column list for comment.

  2. Done looks like

    25 countries by at least 12 fields, every cell with a clause-level source; reviewers in at least 10 countries sign off their rows; a random audit of 10% of cells finds fewer than 2% wrong.

Open 02 · the brief

A history file per crane

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

An open record format for a crane's working life, keyed by maker and serial number: inspections, defects found and fixed, repairs and replaced structural parts, load tests, overloads logged by the crane's own limiter, and incidents. With it, a converter that reads existing inspection reports, typed or scanned, into the format, so a buyer, renter or inspector can see a crane's history from more than one owner.

Why it is still open

CraneFacts, built in 2009 by Frank Bardonaro of the rental firm AmQuip, let owners log repairs and inspections by serial number, but it was voluntary and private, and its address no longer answers. A 2023 buyer's guide in Lift and Access says there is no "Car Fax" for used cranes. I found no open record format for crane histories.

enr.comliftandaccess.com

Built with what exists

JSON Schema; the inspection item lists in the ASME B30 volumes and OSHA's 29 CFR 1926.1412 as the vocabulary; a document-reading AI model to pull fields from reports (see the Note "Seven more flagged"); Python.

  1. First step

    Ask a crane rental firm for 20 annual inspection reports with customer names removed, and draft the format from the fields they share.

  2. Done looks like

    200 redacted inspection reports from at least three inspection firms converted; a certified crane inspector checks every field of 50 of them; at least 98% of fields correct and no deficiency missed; format and converter published under an open license.