BRENNEN

Industries / Industrial equipment and services / Industrial machinery / Conveyors and material handling

Belt conveyors

A belt conveyor carries ore, coal, grain or boxed goods on an endless belt that runs over a powered drive pulley and a long line of free-turning rollers called idlers.

5

Milestones achieved, from 1892 to 2020.

1

To watch for: announced, not yet confirmed outside.

2

Open deliverables. Nobody has shipped them.

The road

AchievedWatch forOpen

Achieved

  1. 1892

    Belts shaped into troughs

    Thomas Robins Jr. began in 1892 a series of inventions that led to his belt conveyor for coal, ores and other products, by the account of the 1920 Encyclopedia Americana; Wikipedia gives 1891 and ties the start to work for Thomas Edison's ore-milling company at Ogdensburg, New Jersey. Robins's patents describe idler pulleys set to "impart a longitudinal trough shape to the belt," so that a flat belt sags into a channel and can carry a heap of loose material. The belt won the grand prize at the Paris Exposition of 1900.

    en.wikisource.orgpatents.google.com

    Credit

    Thomas Robins Jr.; Robins Conveying Belt Company

  2. 1966

    A shared book of rules

    The Conveyor Equipment Manufacturers Association (CEMA), a US trade body whose history starts in 1933, published the first edition of Belt Conveyors for Bulk Materials in 1966, at 331 pages. Known in the trade as "the Belt Book," it sets out design fundamentals, belt capacities and belt selection in one reference; its seventh edition (2014, reprinted 2020) runs to 815 pages in imperial and metric units.

    cemastore.comcemanet.org

    Credit

    CEMA member companies

  3. 2006

    A belt fire kills two

    In 2006 a conveyor belt fire at the Aracoma Alma Mine No. 1 in West Virginia killed two miners. The Mine Safety and Health Administration (MSHA) found 25 violations that contributed and concluded the deaths would have been prevented had the operator complied. Its final rule of 31 December 2008 created a laboratory flame test for conveyor belts (30 CFR Part 14) and required every belt in US underground coal mines to pass it by 31 December 2018.

    LessonA belt is fuel as well as a carrier, and the panel cited Aracoma as evidence of poor belt maintenance.

    govinfo.gov

    Credit

    MSHA; the Technical Study Panel set up under the 2006 MINER Act

  4. 2012

    Motors without gearboxes

    A gearless drive joins a slow electric motor straight to the drive pulley, which removes the gearbox, the couplings and their oil and cooling systems. Siemens says it and ThyssenKrupp first fitted one to a belt conveyor in 1986, underground at the Prosper-Haniel coal mine in Germany. The mining journal E&MJ reported that a gearless overland belt at the Antapaccay copper mine in Peru, 6.5 km long and rated at 5,260 metric tons an hour, had run at production levels since October 2012. Siemens puts the upper limit for one large conventional conveyor gearbox at about 2,500 kW.

    e-mj.com

    Credit

    Siemens; ThyssenKrupp; Glencore Xstrata (Antapaccay)

  5. 2020

    Belts in place of trucks

    When Codelco took its Chuquicamata copper mine in Chile underground, TAKRAF and ABB built a conveyor system that lifts crushed ore more than 1,200 m over almost 13 km; its two main inclined conveyors were first commissioned in 2019 and ABB finished commissioning in 2020. The three main lines are each rated at 11,000 metric tons an hour and run on 5 MW gearless motors. By ABB's figures the system removed the need for 120 large haul trucks and about 130 million liters of fuel a year. ABB and TAKRAF say its uphill tunnel conveyors were the first to use ST10000 steel-cable belt, which International Mining calls the strongest belt in the world, at about 161 kg per meter.

    processonline.com.auim-mining.com

    Credit

    Codelco; TAKRAF; ABB

Watch for

  1. Replacing the strongest belt

    ContiTech says it has completed the first replacement of an ST10000 belt, on Chuquicamata's inclined tunnel conveyors: about 13 km of belt at about 161 kg per meter, laid at an 8.5 degree slope. At the time of its statement the permanent closing splices, the joints that make the belt endless, were still to be made.

    Achieved whenCodelco or another party outside ContiTech reports the line back in production on the new belt with its splices finished.

    im-mining.com

    Claimed by

    ContiTech, May 2026 (reported by International Mining)

Open

  1. 01

    An open idler sound library

    A public collection of labeled sound and vibration recordings from conveyor idlers, some new and some with known bearing faults (dry, pitted, seized or with a cracked shell), run on a bench test stand at several speeds and loads, with a baseline model that names the fault.

    The brief
    Credit · unclaimed
  2. 02

    Robot idler swap, counted

    A general-purpose robot arm, taught by demonstration, that swaps an idler on a stopped and locked-out test frame of troughed belt, so that nobody has to reach between belt and frame.

    The brief
    Credit · unclaimed

Open 01 · the brief

An open idler sound library

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A public collection of labeled sound and vibration recordings from conveyor idlers, some new and some with known bearing faults (dry, pitted, seized or with a cracked shell), run on a bench test stand at several speeds and loads, with a baseline model that names the fault.

Why it is still open

Published idler detectors are trained on data nobody else can use. A 2024 Scientific Reports study ran a fiber-optic system on a 600 m mine conveyor for three months and reported 97.92% accuracy against manual checks, but its data statement only says the data are "included in this article." The open RollCall project, which walks a Unitree Go2 robot beside the belts of a Samarco plant in Brazil, lists its acoustic sensing and field dataset as "not started" (October 2026). A Hugging Face search in November 2026 found roller pictures for object detection, and no idler sound recordings.

nature.comgithub.comhuggingface.co

Built with what exists

Idlers retired from service, a guarded bench frame with a small motor and variable speed drive, MEMS microphones and accelerometers logged by a Raspberry Pi or ESP32, Hugging Face to host the files, and small audio classifiers that can run on a microcontroller. The Note "Maintenance inside the joint" covers chips built to run fault models beside the motor they watch.

  1. First step

    Ask two conveyor service firms for idlers they have already pulled from service, each tagged with the reason it was changed.

  2. Done looks like

    At least 100 idlers, five fault types and three speeds, with 20 hours of labeled audio and vibration under an open license, and a baseline whose accuracy is reported on idlers it never heard in training.

Open 02 · the brief

Robot idler swap, counted

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A general-purpose robot arm, taught by demonstration, that swaps an idler on a stopped and locked-out test frame of troughed belt, so that nobody has to reach between belt and frame.

Why it is still open

Machines built for this one job exist, but none has a published count of swaps and failures. Sandpit Innovation and Lewis Australia described the Spidler in 2014 as a robotic machine to change carrier idlers while a conveyor runs. Hermann Paus's UNI 50-3 LP-IH, built for Rio Tinto's underground belts in Mongolia, carries an 8 t crane and a gripping manipulator (E&MJ, October 2024). The one robot-arm study found, presented in 2025 by authors at China Coal Technology and Engineering Group, reports simulation results only.

miningweekly.come-mj.comsaemobilus.sae.org

Built with what exists

A collaborative arm with 20 kg of payload and 1,750 mm of reach (Universal Robots UR20), a screw jack to lift the belt, a depth camera, and Hugging Face's LeRobot software to record demonstrations and train a policy. The Note "Five demonstrations per task" covers robot models that learn a task from a few recorded demonstrations.

universal-robots.com

  1. First step

    Build a 3 m frame from one used troughing set and a length of old belt, and time a two-person crew doing the swap by hand.

  2. Done looks like

    20 filmed swaps of a standard idler on the frame, each timed, with a published tally of successes and of every time a person had to step in, set beside the time a two-person crew takes on the same frame.