Industries / Industrial equipment and services / Industrial machinery / Conveyors and material handling
Sorters
Sorters are the machines that read each item's label and push, tip or carry it off a moving line into the chute or lane for its destination.
5
Milestones achieved, from 1970s to 2023.
1
To watch for: announced, not yet confirmed outside.
2
Open deliverables. Nobody has shipped them.
The road
AchievedWatch forOpen
Achieved
1970s
Codes keyed, then scanned
When distribution centers began picking many orders at once in the early 1970s, the mixed cases had to be split back into orders before shipping. At the sorter's entry one or two operators read a two- or three-digit code on each case and typed it in, and deflector arms, pushers and pop-up wheels turned the cases off at about 60 cases a minute, by the consultant Cliff Holste's account. By the late 1970s overhead laser scanners that read a barcode at any angle had replaced the keying at high-volume centers run by Sears, JCPenney and Target, though the diverters still set the limit.
Credit
Sears, JCPenney and Target, as named by Cliff Holste in Supply Chain Digest
1980s
The sliding-shoe sorter
A sliding-shoe sorter is a conveyor of metal slats or tubes, each carrying a small shoe that slides across at an angle to push a case off at its exit. Holste credits Alvey Inc. with the original one, the ZIP-SORTER, in the early 1980s: it sorted light and heavy cases gently at about 300 feet (91 m) a minute and about 100 cases a minute, later 120. FKI Logistex says it introduced its own first sliding-shoe sorter, the UniSort V, in 1984, and Holste wrote in 2017 that the design had become the preferred sorter for a broad range of factories and distribution centers.
Credit
Alvey Inc.; FKI Logistex
2000s
Sorter sales fall with dot-coms
A tilt-tray sorter carries each item on a tray around a loop and tips the tray at the right chute; a cross-belt sorter carries it on a short belt that runs sideways to throw it off. Makers of these and of shoe sorters saw sales swell in the dot-com boom, because online orders are often for one item and have to be sorted item by item. A DC Velocity article filed under its June 2003 issue reported that US sales had dropped after the bust, though high-volume sites kept buying: at TJ Maxx's Pennsylvania center two tilt-tray sorters of over 3,500 feet (1,070 m) each sorted clothing for more than 600 stores. Christopher Paulsen, chief executive of the material handling firm WEPCO, put shoe sorters at up to 9,000 items an hour and cross-belt sorters at up to 11,000.
Credit
DC Velocity (report); Steve McElweenie of FKI Logistex's Crisplant division and Christopher Paulsen of WEPCO (comments and figures)
2011
Sorters run on linear motors
A linear motor moves the train of trays or carriers by magnetic force from coils along the track, with no gearmotors or chains. By 2011 Crisplant, part of Beumer Group, was selling its LS-4000 tilt-tray and cross-belt sorters with linear drives; its UK sales director said they cut energy use by over 80% a year against conventional drives, and that three LS-4000 sorters at the Witt-Gruppe site in Germany saved more than 26 tons of CO2 a year, by his figures. In 2015 Holste described Dematic's FlexSort SL2 shoe sorter, driven by redundant linear induction motors with no AC motors, reducers, chains, sprockets or shafts, at an advertised 380 cases a minute at 660 feet (200 m) a minute.
Credit
Crisplant (Beumer Group); Dematic
2023
Hand loading limits a sorter
The US Postal Service deployed 93 Single Induction Package Sorters, fed by hand at one loading point, between July 2021 and October 2022, with a goal of 2,500 packages per machine hour. Its Office of Inspector General found that they averaged 2,719 an hour from January 2022 to June 2023, but that the machines at 33 of 108 facilities missed the goal; where they were used for large packages, staff had to lift packages with both hands to feed it, and at one plant a mechanical dumper and feeder belt raised the hourly average from 2,166 to 2,578. It counted 21 sorters as significantly underused and $38.3 million in questioned costs.
LessonA sorter runs only as fast as items can be put onto it, so the loading step sets the real rate.
Credit
US Postal Service (deployment); USPS Office of Inspector General (audit, September 2023)
Watch for
Faster package sorters at USPS
The US Postal Service says its prototype parallel induction linear sorter, which tips containers of parcels onto a feed belt and reads addresses with a six-sided camera system, handled 12 million packages in its first 10 months at Dulles, Virginia, and can process 7,000 packages an hour, double its single induction sorters. In August 2025 it unveiled a Matrix East/West Sorter at Avondale, Arizona, which it rates at up to 50,000 packages an hour.
Achieved whenThe Inspector General or another outside party reports the measured hourly rates of the deployed machines, as it did for the single induction sorters.
Claimed by
US Postal Service, as reported by FreightWaves, September 2025
Open
01
Robot induction, counted in public
A robot cell that takes mixed parcels from a tote or chute and places them one at a time, label up, onto a moving belt at a set spacing, run for a full shift on camera.
The briefCredit · unclaimed02
An open sort-plan test
A free simulator of a cross-belt loop sorter, with parcel streams and a scoring script, so that methods for deciding which chute serves which destination can be compared on the same test.
The briefCredit · unclaimed
Open 01 · the brief
Robot induction, counted in public
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A robot cell that takes mixed parcels from a tote or chute and places them one at a time, label up, onto a moving belt at a set spacing, run for a full shift on camera.
Why it is still open
Makers publish their own rates, such as Plus One Robotics' "more than 1,700 parcels, boxes, polybags, and padded mailers per hour," and the USPS Inspector General found hand loading holding back the sorters it audited. A General Electric team reported a robot singulating irregular mail pieces from a moving conveyor at 36 a minute with more than 95% efficiency in 1989. A search of OpenAlex for robotic parcel induction and singulation found research systems and simulations of robot sorting, but no outside, published tally of a current robot on a mixed stream.
Built with what exists
A collaborative arm with a suction gripper (Universal Robots UR10e or FANUC CRX) inside a guarded cell; a depth camera such as an Intel RealSense D455; a short belt conveyor with a photo-eye; an open vision or robot model fine-tuned on a few hundred labelled examples (the Note "Five demonstrations per task" covers training robot models from few demonstrations).
First step
Build the test stream: collect 300 used parcels of each type, weigh and photograph them, and publish the list.
Done looks like
An 8-hour filmed run on at least 2,000 mixed items (boxes, polybags and padded mailers, at least a third of them soft), with a public tally of items per hour, double picks, drops, labels face-down and spacing misses, beside a hand-loading baseline on the same belt.
Open 02 · the brief
An open sort-plan test
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A free simulator of a cross-belt loop sorter, with parcel streams and a scoring script, so that methods for deciding which chute serves which destination can be compared on the same test.
Why it is still open
The digital twin that SF Express and university researchers say raised sorting throughput by 10.56% is proprietary; they released their optimization code and the destination shares for four centers, but the simulator and raw parcel data are restricted. GitHub searches for parcel-sorting simulators found student projects and no shared, scored test.
Built with what exists
Python with SimPy for the loop; the authors' released code and data (Zenodo, doi 10.5281/zenodo.21319488); the open-source Open Industry Project simulator to check layouts in 3D; an AI coding agent to write and run the comparison methods (the Note "The jobs agents repeat").
First step
Download the Zenodo record and code, and model one loop with 177 chutes, the size of the smallest center in the paper.
Done looks like
A public repository with the simulator, at least three parcel streams built from the published destination shares, and a scoreboard of throughput and recirculated parcels for at least three methods, with the direction of the published result reproduced or contradicted.