BRENNEN

Industries / Construction and property / Commercial and residential construction / ConTech

Design and model tools

Design and model tools are the programs builders use to make a 3D model of a building before it is built, to check in that model that each trade's work fits with the others, and to turn the model into shop instructions for fabricators and positions for the site.

7

Milestones achieved, from 1984 to 2020.

3

To watch for: announced, not yet confirmed outside.

3

Open deliverables. Nobody has shipped them.

The road

AchievedWatch forOpen

Achieved

  1. 1984

    The virtual building

    Graphisoft, a software company founded in Budapest in 1982, released its first commercial software in 1984. Its owner, Nemetschek, says Graphisoft's "Virtual Building" approach "pioneered the road to what would many years later be called Building Information Modeling", or BIM. BIM means a 3D model of a building whose parts carry data, such as size and material, from which the drawings are made. By 2015, coordination add-ons were linking issues to Graphisoft ArchiCAD as well as Autodesk Revit (Architosh).

    nemetschek.comarchitosh.com

    Credit

    Gábor Bojár and István Gábor Tari, Graphisoft

  2. 1993

    Steel frames modelled in 3D

    Steel detailing means drawing every beam, plate and bolt of a steel frame so a shop can cut, drill and weld it. Tekla, a Finnish software company, completed Xsteel in 1993, a program for modelling steel frames in 3D for fabrication. Tekla says Xsteel sold to over 300 customers in 38 countries, and that it was relaunched as Tekla Structures in 2004. In 2009 an Arup CAD leader told ENR that "all fabricators in the U.K. use Tekla" (his claim, not a count). Trimble bought Tekla in 2011, paying about EUR 319 million ($454 million) for its shares, by Trimble's figures.

    slideshare.netenr.com

    Credit

    Tekla Corporation; Trimble

  3. 2000

    Revit's parametric building model

    Two former employees of PTC, a maker of engineering design software, Leonid Raiz and Irwin Jungreis, started Charles River Software, later renamed Revit Technology Corporation. Revit 1.0 came out in April 2000. It was a parametric model: parts are defined by rules and relationships, so a change to one part carries through to the parts tied to it. Autodesk bought the company on April 1, 2002 for $133 million in cash, according to Autodesk's filing with the US Securities and Exchange Commission. The filing describes Revit as "parametric building technology for building design, construction and management."

    sec.govblog.autodesk.io

    Credit

    Leonid Raiz and Irwin Jungreis, Charles River Software; Autodesk

  4. 2007

    Clash checks across trades

    A clash check is an automatic search of a combined model for places where two parts take up the same space, such as a duct running through a beam. NavisWorks, a company in Sheffield, England, sold software that could "read and merge design data from a host of programs serving many disciplines" and then run clash detection. Autodesk agreed to buy it on May 31, 2007 for about $25 million in cash (Digital Engineering). At the time, Architectural Record asked whether it would keep its direction as a "universal reader" of other companies' files.

    architecturalrecord.comdigitalengineering247.com

    Credit

    NavisWorks, led by chief executive Peter Thompson; Autodesk

  5. 2009

    An open format for issues

    Before BCF, clashes found in a checking program went back to each designer as written reports, and teams had to search their own models to find each problem (AECbytes). BCF, the BIM Collaboration Format, is a small zip file that carries each issue with its comments, camera view, snapshot and the IDs of the model parts involved, so a different program can open the same view. Development started in 2009. It was conceived by Solibri and Tekla with the Institute for Applied Building Informatics (iabi) at Munich University of Applied Sciences, and is kept by buildingSMART International, the body that maintains open model standards.

    github.comgithub.com

    Credit

    Solibri, Tekla and iabi; buildingSMART International

  6. 2019

    Models on a hard hat

    Mixed reality shows digital objects in the wearer's view of the real world. On February 25, 2019 Trimble announced the XR10, a Microsoft HoloLens 2 headset built into a safety hard hat, so site workers can see the building model in place on site. Trimble called it the first device made through Microsoft's HoloLens Customization Program. In a 2025 Auburn University test, 32 construction students used four devices to set survey prisms (reflectors a surveying instrument can measure) at virtual pipe positions. The XR10 had the smallest average error, 3.28 inches, but the authors note that many site tolerances are 1/8 to 1/4 inch. In October 2024 Microsoft stopped making HoloLens 2 and set the end of its support for December 31, 2027 (Computerworld).

    LessonA site tool built on one maker's headset lasts only as long as that maker keeps building the headset.

    s202.q4cdn.comiaarc.orgcomputerworld.com

    Credit

    Trimble; Microsoft

  7. 2020

    Customers push back on Revit

    In July 2020, 17 UK architecture firms, among them Zaha Hadid Architects, Grimshaw and AHMM, sent Autodesk an open letter. They said their Revit costs rose "by 70 percent and beyond from 2015 – 2019" and asked for faster development of the program. By August 20, 116 firms had joined, according to ENR. Autodesk's Amy Bunszel replied: "We have underinvested in architectural modeling functionality in recent years and are working to make that right." Two years later the group told AEC Magazine that Autodesk "still won't admit that the core desktop Revit code needs a complete rewrite."

    LessonActing together, customers won an admission and some changes from the company that holds their models, but not the rewrite they asked for.

    architosh.comenr.comaecmag.com

    Credit

    the signing firms, coordinated by IT consultant Iain Godwin; Autodesk

Watch for

  1. Tekla's plain-language assistant

    Trimble says the Tekla Model Assistant, inside Tekla Structures 2026, carries out modelling and drawing tasks from typed requests in plain words, such as "Create a 3x3 grid with pad footings at every intersection." It is a preview feature, offered only on the Diamond, Graphite and Carbon subscriptions. Trimble's own help page says it "is not fully independent" and cannot yet create reinforcing bars, or single-part and assembly drawings, automatically. Trimble's March 2026 release called it the "AI Model and Drawing Assistant" and gave no figures for time saved.

    Achieved whena steel fabricator or detailing firm outside Trimble publishes, for a real job, how many requests the assistant completed correctly and how much time it saved against modelling by hand.

    help.trimble.comnews.trimble.com

    Claimed by

    Trimble, March 2026 (first listed for Trimble Labs at Trimble Dimensions, November 2025)

  2. Spools drawn by an agent

    Spooling means cutting a pipe, duct or conduit model into sections, called spools, that a shop can build and ship to site. Stratus, a fabrication platform for piping, sheet-metal and electrical contractors, says its new "Agentic Spooling" tools copy assemblies that are already modelled, apply size and weight limits, and use machine learning trained on a customer's own models to predict new assemblies. Stratus says customers can use them "in an experimental environment today, upon request." The release gives no measured results.

    Achieved whena contractor outside Stratus reports, for a real project, what share of the agent's spools its shop built without changes.

    constructiondive.com

    Claimed by

    Stratus (its new Stratus Labs unit, led by co-founder Jonathan Umscheid), August 2026

  3. Ask the model in words

    Revizto, a coordination platform, added an MCP server. MCP, the Model Context Protocol, is a standard connection that lets AI chat tools read another program's data; Revizto names Gemini, Claude and ChatGPT. Revizto says these tools can then answer questions about a project's issues and clashes, such as "What are the top five unresolved structural-to-MEP clashes on Level 3?", and that "The system returns context-aware answers in seconds." It published no accuracy figures.

    Achieved whenan independent party asks a fixed set of questions about a real project and publishes how many answers matched the project's own issue records.

    architosh.com

    Claimed by

    Revizto, August 2026 (reported by Architosh)

Open

  1. 01

    A shared clash test set

    A public set of real clashes, each marked by human coordinators as "needs fixing" or "ignore", with a scoring script, so that any method for sorting clashes can be measured on the same data. Today a BIM coordinator decides which raw clashes are real problems; research programs try to copy that decision.

    The brief
    Credit · unclaimed
  2. 02

    BCF round trip, tallied

    A pack of test issues and a script that checks what survives when each issue is exported as BCF from one coordination program and opened in another: the comment, the status, the camera view, the selected model parts and the snapshot. The result is a public program-by-program table.

    The brief
    Credit · unclaimed
  3. 03

    Rebar files from open models

    An open-source converter that reads the reinforcing bars (rebar) in an IFC model, the open model format, and writes a BVBS file, the plain-text format most rebar cutting and bending machines read, tested on a public set of bars. The test compares files only. It does not run a machine.

    The brief
    Credit · unclaimed

Open 01 · the brief

A shared clash test set

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A public set of real clashes, each marked by human coordinators as "needs fixing" or "ignore", with a scoring script, so that any method for sorting clashes can be measured on the same data. Today a BIM coordinator decides which raw clashes are real problems; research programs try to copy that decision.

Why it is still open

Researchers have trained programs to sort relevant from irrelevant clashes since at least 2019 (Hu and Castro-Lacouture, Penn State) and as recently as 2026 (Ailem and Boton, ÉTS Montréal). A recent review of AI in clash management (Abbasnejad and others) concludes: "The primary barrier to deployment is therefore not model capability but the absence of shared benchmark datasets."

citedrive.com

Built with what exists

the open Schependomlaan dataset, a real Dutch housing project with an Archicad model in IFC and the clash issues raised in a Solibri quality check, saved as BCF and shared for research use (DOI 10.17605/OSF.IO/NE2YU); IfcClash from the open-source IfcOpenShell project, which finds clashes in IFC models and exports them as BCF or JSON; and, as sorting methods to score, a fixed rule set, a low-cost classifier such as Gemini Decision 1 (see the Note "A thousand questions, one pass"), and a model that reads both the clash snapshot and its text, fine-tuned on one GPU as with Liquid LFM3 (see the Note "One GPU to fine-tune"). The advance is cheap classification and one-GPU fine-tuning of models that read images and text together.

  1. First step

    download the Schependomlaan dataset, run IfcClash on its model, and match the raw clashes to the project's own BCF issues to see which clashes the team chose to raise.

  2. Done looks like

    at least 1,000 clashes from at least three open models, each marked by two coordinators working apart, with their rate of agreement reported; the set, the scoring script and the precision and recall (share of flagged clashes that were real, and share of real clashes that were flagged) of at least three sorting methods all published.

Open 02 · the brief

BCF round trip, tallied

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A pack of test issues and a script that checks what survives when each issue is exported as BCF from one coordination program and opened in another: the comment, the status, the camera view, the selected model parts and the snapshot. The result is a public program-by-program table.

Why it is still open

In 2019 a buildingSMART Benelux user day tested "15 different tools for interoperability with BCF"; in 2020 the organiser said the results were "a pile of BCF files" rated by hand, and asked for help automating the ratings. In 2022 a buildingSMART group in Stuttgart wrote that it had not published its test protocols but had discussed the results "with the participant software vendors directly." No program-by-program results appear in the thread.

forums.buildingsmart.org

Built with what exists

the BCF-XML specification, version 3.0 branch, which buildingSMART publishes on GitHub; IfcOpenShell's open BCF library, which reads and writes BCF-XML and the BCF web interface (BCF-API), for the comparison script; and the BCF import and export in programs that already handle it, such as Solibri, Tekla, Archicad, and Revit or Navisworks with a BCF add-on such as BIMcollab's. A coding agent such as Inkling 2 Small (see the Note "Checked without being asked") can draft the field-by-field comparison script and its tests.

  1. First step

    write 20 test issues by hand in one program on a free sample IFC model, export them as BCF, and write a script that compares two BCF files field by field.

  2. Done looks like

    20 test issues sent through every ordered pair of at least six programs, in both BCF 2.1 and 3.0 where the program supports them; a public table showing, for each field, whether it arrived intact; and the test files and script published so anyone can rerun the test.

Open 03 · the brief

Rebar files from open models

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

An open-source converter that reads the reinforcing bars (rebar) in an IFC model, the open model format, and writes a BVBS file, the plain-text format most rebar cutting and bending machines read, tested on a public set of bars. The test compares files only. It does not run a machine.

Why it is still open

Tekla Structures exports BVBS from its own models, but a 2020 Hong Kong University of Science and Technology paper found that in converting IFC to BVBS "data loss occurs and leads to mistakes in cutting and bending." Its own converter was built in Dynamo, a scripting tool inside Revit, handled only two-dimensional bars, and left testing "in a local rebar factory" to future work. A 2024 University of Tokyo study describes its IFC-to-BVBS tool as a prototype. The open FreeCAD Reinforcement add-on makes bar bending schedules and cut lists, but does not list BVBS export.

koreascience.krjstage.jst.go.jp

Built with what exists

IfcOpenShell to read IfcReinforcingBar elements and their bend data; the BVBS 2.0 format (2000) and 3.0 (2018), whose fields (position, length, quantity, weight, diameter, steel grade, bending pin diameter, leg lengths, bend angles, checksum) Tekla's documentation lists; Tekla Structures to make reference BVBS files from the same models; and a coding agent such as Inkling 2 Small (see the Note "Checked without being asked") to write the parser and test it against the reference files. The advance is coding agents that write code and check it against examples.

  1. First step

    model ten common bar shapes in Tekla Structures, export the same model to IFC and to BVBS, and write a script that prints each IFC bar's length and bend angles next to its BVBS line.

  2. Done looks like

    on a public set of at least 200 bars covering at least 20 bar shapes, the converter's BVBS lines match Tekla Structures' own BVBS export of the same model in every field for at least 95% of bars, every output line passes the BVBS checksum, and every mismatch is listed with its cause.