BRENNEN

Industries / Consumer goods / Consumer electronics

Audio

This work makes the radios, players, headphones and earbuds people listen through, and decides how sound gets from a recording to the ear.

6

Milestones achieved, from 1954 to 2022.

1

To watch for: announced, not yet confirmed outside.

2

Open deliverables. Nobody has shipped them.

The road

AchievedWatch forOpen

Achieved

  1. 1954

    A radio for the pocket

    On 18 October 1954 Texas Instruments announced the Regency TR-1, which the IEEE's history wiki calls the first commercial transistor pocket radio, in time for the holiday season. Regency's engineer Richard Koch cut Texas Instruments' prototype from eight transistors to four, soldered the parts straight onto a new circuit board and fitted them into a plastic case the size of a shirt pocket. It weighed 11 ounces, ran for over 20 hours on a 22.5-volt battery and cost US$49.95; Sony followed with its own in 1955.

    LessonThe TR-1 was only a modest commercial success, but it showed that transistors could shrink electronics, and miniaturization became the industry's standard.

    ethw.org

    Credit

    Texas Instruments, under vice president Pat Haggerty, with IDEA Corporation's Regency division

  2. 1979

    Music you carry

    Sony's Walkman, a portable cassette player sold with headphones and a leather case, went on sale in Japan in 1979 and in the US later that year. It had a second headphone socket so that two people could listen, and a microphone so that they could talk to each other. Rivals followed, and by the mid-1980s similar players sold for about US$20 to over US$200.

    LessonBecause most of these players could only play tapes, not record them, they drove sales of pre-recorded cassettes, which passed sales of vinyl records in 1983, by the account of the IEEE's history wiki.

    ethw.org

    Credit

    Sony

  3. 2000

    Quiet for passengers

    On a Swissair flight in 1978, Amar Bose found the airline's headphones drowned out by aircraft noise and worked out the mathematics of noise cancelling, in which microphones pick up outside noise and the headphones play its mirror image to cancel it. Bose lent two prototypes to Dick Rutan and Jeana Yeager for their 1986 nonstop flight around the world in Voyager, sold pilots what it calls the first commercial noise-cancelling headset in 1989, and in 2000 brought the technology to airline passengers in its QuietComfort headphones.

    boseaviation.com

    Credit

    Amar Bose, Bose Corporation

  4. 2001

    A thousand songs, pocketed

    Apple's iPod, announced on 23 October 2001, held up to 1,000 songs on a 5 GB hard drive in a 6.5-ounce case, copied a user's iTunes songs and playlists over a FireWire cable by itself, and played for up to 10 hours on a rechargeable battery. Apple said it was a fifth of the volume of the hard-drive players then on sale.

    apple.com

    Credit

    Apple

  5. 2016

    The headphone jack goes

    Apple's iPhone 6s had a 3.5 mm headphone jack; the iPhone 7, announced on 7 September 2016, had none, and came with earphones that plugged into its Lightning charging port and an adapter for old headphones. The same day Apple announced AirPods, earbuds with no cable at all, run by its own W1 chip, with up to 5 hours of listening per charge, more than 24 hours with the charging case, at US$159.

    apple.comapple.comsupport.apple.comsupport.apple.com

    Credit

    Apple

  6. 2022

    The phone absorbs the iPod

    On 10 May 2022 Apple said it would sell the iPod touch only while supplies lasted, closing the line it had begun in 2001. Greg Joswiak, Apple's senior vice president of worldwide marketing, said the company had put music "across all of our products, from the iPhone to the Apple Watch to HomePod mini".

    LessonThe music player became a feature of the phone.

    apple.com

    Credit

    Apple

Watch for

  1. Apple's own noise test

    Apple says AirPods Pro 3, on sale from 19 September 2025, have "the world's best in-ear Active Noise Cancellation" and remove up to twice as much noise as AirPods Pro 2. Its footnote says Apple ran the test itself in July 2025, on prerelease firmware, following IEC 60268-24, the international method for measuring the noise cancelling of headphones and earphones, and compared the earbuds with "the best-selling wireless in-ear headphones commercially available at the time".

    Achieved whena lab outside Apple measures AirPods Pro 3 and the other best-selling in-ear models to IEC 60268-24 and publishes the results.

    apple.comdoi.org

    Claimed by

    Apple, September 2025

Open

  1. 01

    Phone dose readouts, checked

    A bench check of the headphone sound levels that phones measure and show their owners. iPhones show a live headphone level and a history in the Health app, and Android 14 and later can keep a seven-day sound dose, the total sound energy reaching the ear, and warn when it passes the limit. The check plays fixed test tracks from 10 phones through 6 headphones each at five volume steps, measures the actual level in an ear simulator and sets it beside what each phone reports. Nobody wears anything.

    The brief
    Credit · unclaimed
  2. 02

    Which codec really plays

    A current public table of the Bluetooth audio codec and data rate that each Android phone and headphone pair actually settles on with default settings, at 1 meter and through one wall, set against the best codec both support. A codec is the method that squeezes digital audio to fit the radio link; Sony's LDAC, for example, runs at 330, 660 or 990 kbit/s and in its default "best effort" mode switches among them by itself.

    The brief
    Credit · unclaimed

Open 01 · the brief

Phone dose readouts, checked

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A bench check of the headphone sound levels that phones measure and show their owners. iPhones show a live headphone level and a history in the Health app, and Android 14 and later can keep a seven-day sound dose, the total sound energy reaching the ear, and warn when it passes the limit. The check plays fixed test tracks from 10 phones through 6 headphones each at five volume steps, measures the actual level in an ear simulator and sets it beside what each phone reports. Nobody wears anything.

Why it is still open

Apple says its headphone measurements are "most accurate when using Apple or Beats headphones" and that audio through other headphones "can be estimated based on the volume of your iPhone". Android's documentation asks for values "close to the actual sound pressure levels to which the user is exposed", and has the system compute the dose itself when a phone's audio hardware cannot supply them. A 2023 study of safe-listening software warned that an app's dose figure can mislead because "the real SPL near the ear drum is not comparable with the APP". A search found no published test of the phones' own readouts.

support.apple.comsource.android.compmc.ncbi.nlm.nih.gov

Built with what exists

An IEC 60318-4 ear simulator or a head and torso simulator, as found in university hearing labs; a calibrated measurement microphone or sound level meter; pink-noise and music test tracks; the WHO-ITU H.870 safe-listening limit for adults of 1.6 Pa²h a week as the yardstick, cited in the 2023 study; screen recordings of each phone's readout; a spreadsheet or Python to compute doses both ways.

  1. First step

    On a borrowed ear simulator, play pink noise from one iPhone through AirPods and through a wired earphone from another brand at three volume steps, and log the headphone level shown in Control Center beside the measured level.

  2. Done looks like

    For 60 phone and headphone pairs at five volume steps, the reported and measured levels side by side in dB(A) with the difference for each, a seven-day dose computed both ways for a fixed listening schedule, and all recordings and scripts published.

Open 02 · the brief

Which codec really plays

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A current public table of the Bluetooth audio codec and data rate that each Android phone and headphone pair actually settles on with default settings, at 1 meter and through one wall, set against the best codec both support. A codec is the method that squeezes digital audio to fit the radio link; Sony's LDAC, for example, runs at 330, 660 or 990 kbit/s and in its default "best effort" mode switches among them by itself.

sony.co.jp

Why it is still open

SoundGuys found in its tests that "smartphones rarely pick the 990kbps option when connecting to LDAC equipment", but its October 2025 update warns that many of the phones it tested "are also long gone" and calls the article "more of a snapshot into history than always-current information". A search found no current table of what phones choose.

soundguys.com

Built with what exists

Android's Bluetooth HCI snoop log, a developer option that records the messages a phone exchanges with a headphone, decoded in Wireshark to show the codec settings the two agree; the codec shown in Android's developer options as a second check, since some phones leave the audio negotiation out of the log, as a Wireshark user found with a 2017 Samsung phone; a set of headphones supporting LDAC, aptX and AAC; a script that runs each pairing the same way. iPhones support only the SBC and AAC codecs, by SoundGuys' account, so they need a single row each.

ask.wireshark.org

  1. First step

    Turn on the HCI snoop log on one Android phone, pair one LDAC headphone, play a track for five minutes, and publish the decoded capture showing which codec and rate were used.

  2. Done looks like

    25 Android phones from at least eight makers, each paired with six headphones, codec and data rate logged at both distances, every capture file published, and the table rerun within three months of each major Android release.