Industries / Consumer goods / Consumer electronics
Displays
This work chooses and develops the screens in TVs, phones, tablets and computers, from the picture tube to liquid crystal, plasma and organic LED (OLED) panels, and decides how much color and brightness they show.
7
Milestones achieved, from 1953 to 2024.
1
To watch for: announced, not yet confirmed outside.
2
Open deliverables. Nobody has shipped them.
The road
AchievedWatch forOpen
Achieved
1953
Color compatible with old sets
On 17 December 1953 the US Federal Communications Commission (FCC) approved a color TV standard written by the National Television System Committee (NTSC), an industry group. It followed the system RCA Laboratories had built from 1946, the only one that black-and-white sets already in homes could still receive, and it used RCA's shadow-mask color picture tube, which the IEEE says "more than any other component" made color TV a household technology.
LessonWorking with the sets people already owned counted for more than an early lead in picture quality: RCA's 1950 demonstration images "were not impressive compared to the improved CBS system", whose design old sets could not receive, and the FCC rejected RCA that September, yet the rest of the industry kept refining RCA's approach and the 1953 standard followed it.
Credit
RCA Laboratories (Princeton); the NTSC
1988
A TV-sized liquid crystal screen
A team at RCA's Sarnoff Research Center led by George Heilmeier, with Louis Zanoni and Lucian Barton, demonstrated what the IEEE calls the first liquid crystal display (LCD) between 1964 and 1968. In 1988 Sharp showed a 14-inch color LCD driven by thin-film transistors (TFT, one tiny switch per dot of the picture) for TV, when the largest such screens in mass production measured 3 inches; the IEEE says the result convinced other electronics companies to join the young TFT-LCD industry.
Credit
RCA (Heilmeier, Zanoni, Barton); Sharp. _for_TV,_1988)
2007
Flat screens outsell tubes
DisplaySearch, a market research firm, reported that in the fourth quarter of 2007 LCD TVs made up 47% of TVs shipped worldwide, more than 28.5 million sets, against 46% for cathode ray tube (CRT) sets, the first time LCD had led. CRT had held 77% of the market in the first quarter of 2006.
Credit
LCD panel and TV makers; figures by DisplaySearch
2013
Plasma bows out
Fujitsu sold the first practical color plasma TV in 1993, a 21-inch set developed by a team led by Tsutae Shinoda, and plasma went on to open the market for large wall-mounted TVs, by the IEEE's account. Pioneer said on 12 February 2009 that it would leave the TV business, forecasting a net loss of ¥130 billion and seeing no prospect of profit; Panasonic said on 31 October 2013 that it would end plasma panel production that December, citing low demand, the development of LCD and severe price competition.
LessonIn 2008 DisplaySearch pointed out that LCD was the only other technology that reached below 20 inches, while plasma stopped at 32 inches, so LCD could replace tubes at every size.
Credit
Fujitsu; Pioneer; Panasonic
2013
OLED TVs go on sale
LG Electronics took orders in South Korea from 3 January 2013 for its 55-inch OLED TV, model 55EM9700, at KRW 11 million (about US$10,000), with deliveries from February. Each dot of an OLED screen makes its own light, so the set needs no backlight and was 4 mm thick; LG added a white subpixel to the usual red, green and blue. Optica's news magazine called it the first commercially available OLED TV.
Credit
LG Electronics
2017
3D TV is dropped
TV makers and broadcasters pushed 3D sets and channels from 2010, after the film Avatar. In January 2017 LG and Sony said their new TVs would no longer play 3D; LG's Tim Alessi said research showed it was "not a top buying consideration" and that "actual usage was not high". DirecTV had already closed its 24-hour 3D channel four years earlier, and ESPN a year after that.
LessonA feature that needed special glasses and special content sold sets for a few years but was not used, and makers moved to high dynamic range (HDR) picture instead.
Credit
LG; Sony
2024
Two stacked OLED layers
Apple's iPad Pro of May 2024 used a tandem OLED screen, which stacks two light-emitting layers so that together they give more light than one. Apple describes it as "two OLED panels" whose light is combined, and gives 1,000 nits (candelas per square meter) of full-screen brightness and 1,600 nits peak for HDR.
Credit
Apple
Watch for
Every color in BT.2020
BT.2020 is a TV color range wider than DCI-P3, the range that HDR video is in practice made for, as TechRadar notes. TCL says on its website that its SQD Mini LED TVs show 100% of BT.2020 and up to 10,000 nits. TechRadar measured TCL's first such set, the X11L, at 91.8% of BT.2020 and 97.7% of DCI-P3 in its Filmmaker Mode, and Hisense's 116UX, a TV lit by red, green and blue LEDs (RGB mini-LED), at 92.6% of BT.2020; high-end mini-LED TVs had usually reached 79% to 83%.
Achieved whenan independent lab measures at least 99% of BT.2020 on a TV on sale, in its accurate picture mode, and also on real footage, not only test patterns.
Claimed by
TCL, on its website, as reported in February 2026
Open
01
Color measured in real scenes
A public test of how much of the BT.2020 color range RGB mini-LED, quantum-dot mini-LED and OLED TVs actually show when a colored area sits among other content, not on a black screen. The test clips put one saturated patch at the center and change what surrounds it, from black and gray at several brightness levels to other saturated colors and busy picture-like scenes, and a meter reads the patch each time.
The briefCredit · unclaimed02
Count the dimming zones
A public table of how many local dimming zones each mini-LED TV really has, measured for each screen size and set beside the maker's figure. A zone is a patch of backlight the TV can dim on its own. The method: step a small white square across a black screen, film it with a fixed camera in a dark room, and find where the glow around the square jumps from one patch to the next; rows times columns gives the count.
The briefCredit · unclaimed
Open 01 · the brief
Color measured in real scenes
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A public test of how much of the BT.2020 color range RGB mini-LED, quantum-dot mini-LED and OLED TVs actually show when a colored area sits among other content, not on a black screen. The test clips put one saturated patch at the center and change what surrounds it, from black and gray at several brightness levels to other saturated colors and busy picture-like scenes, and a meter reads the patch each time.
Why it is still open
Reviewers measure color with standard patterns on black. Nick Pino of Tom's Guide wrote in March 2026 that some RGB mini-LED TVs reach 100% of BT.2020 only "when you've got one of these test patterns pulled up," that the LEDs behave differently on real content, and that he still needs "more Rec.2020 test content". He adds that sets with fewer zones have to fall back to a white backlight more often.
Built with what exists
HDR10 test clips made with FFmpeg and the x265 encoder, whose --master-display and --max-cll options write the HDR metadata, played from a USB stick; a colorimeter such as the Calibrite ColorChecker Display Plus or X-Rite i1Display Pro, read with ArgyllCMS's open-source spotread tool; Python to work out coverage; a coding agent to script the clips and the analysis, with a person checking each clip's code values.
First step
Make eight clips around one red, one green and one blue patch, and measure one TV in Filmmaker Mode twice to see whether the readings repeat.
Done looks like
At least 12 TVs, including at least four RGB mini-LED sets, each measured under at least eight surround conditions with three repeats; BT.2020 and DCI-P3 coverage published for every condition, with the clips and scripts, and repeat readings within 1 percentage point.
Open 02 · the brief
Count the dimming zones
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A public table of how many local dimming zones each mini-LED TV really has, measured for each screen size and set beside the maker's figure. A zone is a patch of backlight the TV can dim on its own. The method: step a small white square across a black screen, film it with a fixed camera in a dark room, and find where the glow around the square jumps from one patch to the next; rows times columns gives the count.
Why it is still open
Makers publish ceilings or one number for a whole range. Digital Citizen found in October 2026 that TCL prints "Up to 4000+ Discrete Dimming Zones" once for its 65- to 98-inch QM8L sets and calls such figures "published series maximums" whose "values vary by screen size", and that Hisense lists the same 144 zones for its 50-inch and 85-inch E7SF while its US page says "hundreds" and an Amazon listing says "thousands". RTINGS gives "an estimate of the number of zones" in its reviews, unscored and without a method others can repeat.
Built with what exists
FFmpeg to make the stepping-square clip; a camera or phone with manual exposure on a tripod; OpenCV in Python to find the jumps in brightness; a coding agent to write and test the analysis code.
First step
Make the clip, count the zones on one TV twice in one week, and compare the two counts.
Done looks like
25 TV models, at least five of them in two sizes, each counted twice on different days with the two counts within 5% of each other, set beside the published figure; the video, frames and code published so anyone can recount.