BRENNEN

Industries / Health / Healthcare / Chiropractic

Adjustment

Adjustment is the treatment itself: a quick, short push to a spinal joint, called a high-velocity low-amplitude (HVLA) thrust, given by hand or with a hand-held instrument.

6

Milestones achieved, from 1967 to 2025.

2

To watch for: announced, not yet confirmed outside.

2

Open deliverables. Nobody has shipped them.

The road

AchievedWatch forOpen

Achieved

  1. 1967

    A hand-held adjusting instrument

    Arlan Fuhr developed the Activator Adjusting Instrument, a hand-held device that delivers the adjusting impulse and that many chiropractors use in place of a manual thrust; his company, Activator Methods International, dates its work to 1967. In the National Board of Chiropractic Examiners' 2005 job analysis, 51.2% of American chiropractors said they used it, making it the most used method after Diversified, the standard hand-thrust technique. A 2012 review of 8 trials found it gave benefits comparable to manual thrusts for spinal pain, but the trials were small, short and lacked sham groups.

    Lessonwide use came first; by Fuhr and Menke's own 2005 count, more than 100 studies existed on the instrument, but only one had tested the Activator method of deciding where to use it.

    activator.compmc.ncbi.nlm.nih.goveuropepmc.org

    Credit

    Arlan W. Fuhr, Activator Methods International; review by Tiffany Huggins and colleagues, Canadian Memorial Chiropractic College (2012)

  2. 1993

    Thrust forces measured on patients

    A team at the University of Calgary's Human Performance Laboratory placed a thin, flexible pressure mat between the clinician's hand and the patient to measure spinal manipulation as it was given in practice; they wrote that no direct measurement in a clinical setting had been made before. Peak and preload forces were much smaller on the neck than on the mid-back and the sacroiliac joint, and on those two regions the preload predicted the peak.

    europepmc.org

    Credit

    W. Herzog, P. J. Conway, G. N. Kawchuk, Y. Zhang and E. M. Hasler (Spine, 1993)

  3. 2003

    The pop is not needed

    In two US military physical therapy clinics, 71 people with low back pain received the same thrust to the sacroiliac region, and 50 had an audible pop. At 48 hours both groups had improved by the same amount in movement, pain and disability, and a pop did not raise the odds of a dramatic improvement (odds ratio 1.2, 95% confidence interval 0.38 to 4.04).

    Lessonthe sound is not a sign that a thrust has worked.

    europepmc.org

    Credit

    Timothy W. Flynn, Julie M. Fritz, Robert S. Wainner and Julie M. Whitman, US Army-Baylor University program in physical therapy (Archives of Physical Medicine and Rehabilitation, 2003)

  4. 2004

    Thrusts often miss their level

    At the University of Waterloo, 28 clinicians with 1 to 43 years' experience gave mid-back and low-back thrusts to 64 volunteers without symptoms while accelerometers on the skin located each pop. In the low back the average pop was 5.29 cm from the target, at least one vertebra away, and about half were judged accurate; the mid-back was more accurate, at 3.5 cm on average. Most thrusts produced 2 to 6 pops, so at least one usually came from the target joint.

    Lessona thrust aimed at one joint usually moves several.

    europepmc.org

    Credit

    J. Kim Ross, David E. Bereznick and Stuart M. McGill (Spine, 2004)

  5. 2015

    Joint crack filmed by MRI

    Gregory Kawchuk's team at the University of Alberta filmed ten knuckle joints by real-time MRI while pulling them apart until they cracked. The crack came as a gas cavity formed in the joint fluid, not as a bubble collapsed, and the joint's resting spacing was the same before and after. A. Unsworth, D. Dowson and V. Wright had concluded in 1971 that the collapse of a bubble made the sound. A 2018 mathematical model by V. Chandran Suja, of Stanford University, and A. I. Barakat supported bubble collapse again, needing only a partial collapse so that a cavity can remain, so the source of the sound is still argued.

    Lessonboth sides of the argument place the sound in gas in the joint fluid, and neither found the joint moved back into place.

    pmc.ncbi.nlm.nih.govpmc.ncbi.nlm.nih.govpmc.ncbi.nlm.nih.gov

    Credit

    Gregory N. Kawchuk and colleagues (PLOS ONE, 2015); A. Unsworth, D. Dowson and V. Wright (Annals of the Rheumatic Diseases, 1971)

  6. 2025

    Force feedback in teaching

    A force-sensing table is a treatment table with a force plate built in, which shows students the force of each thrust as they give it; the Canadian Memorial Chiropractic College's version records forces in three directions at up to 2,000 readings a second. By the 2025 count of a group led from that college, which sells the table, more than 20 chiropractic schools used some such device to teach students to control their force. Others use them too: a French team recorded 46 licensed chiropractors on the college's table at a national meeting in March 2024. Measurements on a manikin show why force is taught: in Zurich, 81 Swiss chiropractors gave thoracic thrusts with peak forces from 146 to 1,285 N, yet most measures repeated fairly to very well from one day to the next, as if each had a profile of their own.

    Lessona cadaver study at Université du Québec à Trois-Rivières found the table read lower than the force applied to the spine in 60% of trials, and Funabashi's group write that whether training force changes patients' outcomes is still unknown, so the teaching ran ahead of the evidence.

    pmc.ncbi.nlm.nih.govpmc.ncbi.nlm.nih.govpmc.ncbi.nlm.nih.govpmc.ncbi.nlm.nih.gov

    Credit

    Martha Funabashi and colleagues (Journal of the Canadian Chiropractic Association, 2025); Mégane Pasquier and colleagues, Institut Franco-Européen de Chiropraxie (2026); Luana Nyirö, Lindsay M. Gorrell and colleagues, Balgrist University Hospital (2024)

Watch for

  1. Contact point steers the force

    Four patients having planned lower-back surgery had accelerometers fixed by pins to their second and fourth lumbar vertebrae while an Impulse iQ hand-held adjusting instrument was applied at six points on the exposed spine. Pushes on the spinous process (the bony point at the back of a vertebra) gave larger back-to-front acceleration at the second lumbar vertebra in every patient, though not significantly at the patient level, and pushes over the facet joints gave larger acceleration along the spine at the fourth. A push on the third lumbar vertebra moved the second far more than a push on the fifth (21.3 against 8.2 g). The authors call the study exploratory, and the lead author developed the Impulse iQ.

    Achieved whena team with no tie to the instrument's maker repeats the contact-site differences in more people or in cadavers.

    pmc.ncbi.nlm.nih.gov

    Claimed by

    Christopher J. Colloca, Robert Gunzburg, Mostafa Afifi Hegazy and Marek Szpalski, Frontiers in Bioengineering and Biotechnology, August 2026

  2. Thrust stretches neck artery less

    A review of six cadaver studies, four pooled, found that a neck manipulation stretched the vertebral artery, which runs through the neck bones to the brain, by up to 3.8% at the top of the neck, against up to 12.5% when the same necks were simply turned through their range, most of all in rotation. The review includes its authors' own 2024 cadaver measurements.

    Achieved whena group outside this laboratory, or a measurement in living people such as ultrasound of the artery during manipulation, finds the same.

    europepmc.orgeuropepmc.org

    Claimed by

    Caroline Fagundes, Felipe Coutinho Kullmann Duarte and Walter Herzog, Clinical Biomechanics, October 2025

Open

  1. 01

    One reference thrust, every device

    A bench rig that pushes the same programmed thrust, with a set preload, peak and rise time, into a standard manikin through a calibrated load cell, and uses it to measure the error of every force-measuring device schools and labs use for manipulation: force-sensing tables, pressure mats such as Novel's pliance system, and sensing gloves such as Tekscan's Grip system. The rig travels between schools and builds one public table of errors.

    The brief
    Credit · unclaimed
  2. 02

    Public thrust curves and code

    An open library of raw force-time curves of spinal manipulation on manikins, from many clinicians, countries and devices, with an open-source program that computes the standard measures the same way for every file and reproduces the published figures of the studies that contribute.

    The brief
    Credit · unclaimed

Open 01 · the brief

One reference thrust, every device

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A bench rig that pushes the same programmed thrust, with a set preload, peak and rise time, into a standard manikin through a calibrated load cell, and uses it to measure the error of every force-measuring device schools and labs use for manipulation: force-sensing tables, pressure mats such as Novel's pliance system, and sensing gloves such as Tekscan's Grip system. The rig travels between schools and builds one public table of errors.

Why it is still open

A 2021 scoping review found 16 devices for measuring these forces, each reporting between zero and eight measurement properties under different names. Funabashi's group write that table readings differ from the force the clinician applies and that sensors at the hand are limited in maximum force and sampling rate; one recent manikin study sampled at 100 readings a second against the CMCC table's 2,000. A 2023 cadaver study used a motorized apparatus to deliver set thrusts, and a 2017 study replayed thrusts on pig spine segments with a robot. Christopher Colloca and colleagues fired six hand-held adjusting instruments into a dynamic load cell in 2005, but that tested what the instruments deliver, not how well the measuring devices read a thrust. Searches in November 2026 found no shared bench comparison of the measuring devices in teaching use.

pmc.ncbi.nlm.nih.govpmc.ncbi.nlm.nih.govpmc.ncbi.nlm.nih.govpmc.ncbi.nlm.nih.goveuropepmc.orgeuropepmc.org

Built with what exists

an electric linear actuator with servo control, for example from LinMot or Festo; an inline load cell from a maker such as FUTEK; a data logger at 2,000 readings a second; CMCC's Human Analogue Mannequin; Python for extracting preload, peak force, time to peak and rate of force application.

  1. First step

    Put a load cell between a hand press and a manikin lying on one force-sensing table, log both at 1,000 readings a second for 20 pushes, and report the gap.

  2. Done looks like

    at least four device types tested at three peak forces (about 200, 400 and 600 N) and three rise times, 30 thrusts each; for every device the average error and limits of agreement on each measure against the load cell; repeated at three schools; data and rig drawings published.

Open 02 · the brief

Public thrust curves and code

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

An open library of raw force-time curves of spinal manipulation on manikins, from many clinicians, countries and devices, with an open-source program that computes the standard measures the same way for every file and reproduces the published figures of the studies that contribute.

Why it is still open

A 2023 scoping review of 66 studies found peak forces reported from 17 to 1,213 N and preloads from 0 to 671 N, said some of that spread likely comes from the measuring equipment, and called for better reporting. The Swiss study of 81 chiropractors and a French study of 46 share their data only on request and extract measures with their own software. Mohamed Elgendi and colleagues, working with the Swiss team, built a Matlab toolbox in 2023 that finds the standard points on a curve automatically and tested it on 1,233 thrusts, but their paper gives no link to the code or the data. A web search in November 2026 found no public set of such curves on Zenodo, Figshare, OSF or GitHub.

pmc.ncbi.nlm.nih.govpmc.ncbi.nlm.nih.govpmc.ncbi.nlm.nih.govdoi.org

Built with what exists

Python with SciPy and pandas; Zenodo for the data; a shared CSV format recording device, sampling rate, spinal region and technique; consent forms for the clinicians who give the thrusts.

  1. First step

    Ask the corresponding authors of the Swiss and French manikin studies whether their curves can be released, and draft the file format.

  2. Done looks like

    at least 5,000 thrusts from 200 clinicians in three countries on two kinds of device; the program reproduces the published means of two contributing studies within 5%; released under an open licence with a datasheet.