Industries / Mining and materials / Chemicals and petrochemicals
Refining
Refining splits crude oil into fuels and petrochemical raw materials, and reshapes its molecules to make more of the products people want.
5
Milestones achieved, from 1913 to 2021.
1
To watch for: announced, not yet confirmed outside.
2
Open deliverables. Nobody has shipped them.
In depth
The same ground is charted in more depth, as an industry of its own.
The road
AchievedWatch forOpen
Achieved
1913
Cracking heavy oil with heat
Standard Oil of Indiana started the first row of pressure stills at its Whiting, Indiana refinery. Heated under pressure, heavy oil broke into lighter molecules, giving far more petrol than the crude oil contained.
Credit
William Burton and Robert Humphreys of Standard Oil (Indiana); the local historical society dates their first work to 1908
1937
A catalyst does the cracking
Sun Oil opened a full-scale Houdry unit at its Marcus Hook, Pennsylvania refinery. It used a silica-alumina catalyst, a solid that speeds a reaction without being used up, held in fixed beds. By 1942, 14 Houdry units were making high-octane aviation fuel for the armed forces, according to the Science History Institute.
Credit
Eugène Houdry and Sun Oil
1942
A catalyst that flows
On 25 May 1942 Standard Oil of New Jersey started PCLA No. 1 at its Baton Rouge refinery, which the North American Catalysis Society calls the first commercial circulating fluid-bed reactor. A fine catalyst powder moved continuously between the reactor and a regenerator, so the unit no longer had to stop. The American Fuel & Petrochemical Manufacturers says fluid catalytic cracking now produces the majority of the world's petrol.
Credit
Warren K. Lewis and Edwin Gilliland of MIT; Donald Campbell, Homer Martin, Eger Murphree and Charles Tyson of Standard Oil Development Co
1949
Platinum raises octane
The first Platforming unit started at Old Dutch Refining's refinery in Muskegon, Michigan. A catalyst of tiny platinum particles on alumina reshaped petrol molecules to raise octane without toxic additives. The process also gave large amounts of benzene and other aromatics, which The Chemical Engineer says had come from coal tar and became a starting point for plastics.
Credit
Vladimir Haensel, Universal Oil Products (UOP)
2021
The end of leaded petrol
Tetraethyl lead was added to petrol from 1922 to improve engine performance. In July 2021 service stations in Algeria stopped offering leaded petrol, and the United Nations said its use had ended worldwide. The UN Secretary-General said the ban would prevent more than one million premature deaths each year.
LessonRemoving an additive from every country's fuel took a nineteen-year UN campaign.
Credit
the UN Environment Programme's Partnership for Clean Fuels and Vehicles, started in 2002, working with governments and refiners
Watch for
AI yield models at Aramco
Emerson says its hybrid models, which combine physics-based process models with machine learning, predict yield and product quality in Aramco's catalytic reforming units with accuracy of up to 98.5%. The models feed refinery planning. The release gives no baseline and no outside check.
Achieved whenAramco or an outside party publishes measured before-and-after figures showing that the gap between planned and actual refinery output has narrowed.
Claimed by
Emerson and Aramco, April 2026
Open
01
Read every emission-event report
A public dataset that gives every "emissions event" reported in Texas by refineries and chemical plants a cause (for example power loss, compressor trip, leak or maintenance) and the equipment involved, and then lists the failures that repeat at each plant. In Texas law an emissions event is an upset, or an unscheduled startup, shutdown or maintenance job, that releases air pollution the plant's permit does not allow.
The briefCredit · unclaimed02
Membrane savings across many crudes
Public process models of a refinery's crude distillation unit, with and without a membrane step in front of it, run for twenty published crude oils, reporting the energy used per barrel in each case.
The briefCredit · unclaimed
Open 01 · the brief
Read every emission-event report
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A public dataset that gives every "emissions event" reported in Texas by refineries and chemical plants a cause (for example power loss, compressor trip, leak or maintenance) and the equipment involved, and then lists the failures that repeat at each plant. In Texas law an emissions event is an upset, or an unscheduled startup, shutdown or maintenance job, that releases air pollution the plant's permit does not allow.
Why it is still open
Texas plants reported 21,769 emissions events from September 2016 to August 2022, and the state required an analysis of the cause for 119 of them, about 0.5%, according to the Environmental Integrity Project's review of state records.
Built with what exists
The emission-event records the Texas Commission on Environmental Quality keeps in its STEERS database; a model that answers fixed-choice questions about each report, such as Google's Gemini Decision 1, or a small open model fine-tuned on one graphics card, such as Liquid AI's LFM3.
First step
Obtain one year of reports for one county, from the state's online search or a records request, and label 100 by hand to settle the list of causes.
Done looks like
Every event from one six-year period classified. Two people label 300 randomly chosen events without seeing the model's answers, and the model agrees with them on at least 90% of causes. Repeat-failure tables for each plant are published with the code.
Open 02 · the brief
Membrane savings across many crudes
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
Public process models of a refinery's crude distillation unit, with and without a membrane step in front of it, run for twenty published crude oils, reporting the energy used per barrel in each case.
Why it is still open
The savings reported in Nature in June 2026 (30% less refinery energy, 35% less carbon dioxide, 20% less water) come from a techno-economic model, and the membrane has not been reported running in a refinery.
Built with what exists
DWSIM, a free, open-source process simulator; crude assays, the laboratory breakdowns of a crude oil into its fractions, which producers publish free, such as the 46 spreadsheets on Equinor's site; membrane data from the Nature paper; a coding agent that tests its own work, such as one built on Thinking Machines' Inkling 2 Small (Notes: "Checked without being asked").
First step
Download five Equinor assays and build a base crude unit in DWSIM whose product yields match each assay.
Done looks like
Twenty crude oils modelled, all files and code public, the energy saving reported for each crude, and a list of the crudes for which the saving falls below 30%.