Industries / Energy, water and waste
Carbon capture
Carbon capture is separating carbon dioxide from the exhaust of power stations and factories, or from the open air, then compressing it and moving it by pipe or ship to be stored deep underground or used to make other products.
1996
Statoil, now Equinor, began removing carbon dioxide from the natural gas of the Sleipner field in the Norwegian North Sea and injecting it into the Utsira formation, a layer of water-filled sandstone under the seabed, instead of releasing it; Equinor counts more than 19 million tonnes stored there by the end of 2020. The Global CCS Institute and Imperial College London's register of stored CO2 both count the world's stored total from this start.
36
Milestones achieved across 6 domains.
11
To watch for: announced, not yet confirmed outside.
12
Open deliverables. Nobody has shipped them.
In one minute
Where it started
Chemical plants have washed carbon dioxide out of gas with amines since Robert Bottoms patented the method in 1930, and from 1972 Texas oil fields bought CO2 piped from gas plants to push out more oil. Storing CO2 to keep it out of the air began at Sleipner in 1996. MIT's project sheet says the plant was built to avoid Norway's 1991 tax on CO2; Offshore magazine reported in 1996 that the tax did not cover naturally produced CO2 and that Statoil found venting it "environmentally unacceptable".
Where it stands
The Global CCS Institute counted 113 commercial capture facilities operating at the end of July 2026, able to capture 68 million tonnes of CO2 a year, with 56 million tonnes more under construction; it notes that capacity is not the same as what is actually captured, and 42 million tonnes of the 68 are at natural gas processing and LNG plants. More than 400 million tonnes have been stored since 1996, by the count of Imperial College London's register. Against the 38.2 billion tonnes of fossil CO2 that the Global Carbon Budget projects for 2026, today's capacity is under 0.2%.
What is open
Many of the field's key numbers are design figures or the operator's own: how often capture plants run, how much they capture, how far a pipeline leak would reach, and whether the tonnes reported to one agency match those reported to another. Most open jobs are public, checkable records of those numbers, built from filings, state data and free satellite images, plus independent re-runs of the models that storage permits rest on. The rest are bench tests of the materials that capture CO2 from air, including ones picked by AI models. None of them needs access to a working capture plant.
Domains
AchievedWatch forOpen
Domain
Progress
Last achieved
Watch for
Open
Capture at the plant
Separating carbon dioxide from the exhaust or process gas of a power station or factory before it reaches the air, most often by washing the gas with a liquid that takes up CO2 and gives it back when heated.
5 · 1 · 2
Last achievedPetra Nova at full scale2016
Watch forLargest coal-unit capture
2
openCapture from air
Taking carbon dioxide out of ordinary outside air, where it is far more dilute than in a smokestack, with machines that blow air over a material that holds CO2 and then release it, by heat, for storage or use.
6 · 2 · 2
Last achievedAir capture hubs kept2026
Watch forMammoth reaches design rate
2
openTransport
Moving captured carbon dioxide from where it is captured to where it is used or stored, mostly by pipeline and, more recently, by ship.
7 · 2 · 2
Last achievedLandowners stop a network2025
Watch forFive million tonnes a year
2
openUnderground storage
Injecting CO2 into porous rock deep underground, below a tight layer that keeps it from rising, and showing that it stays there.
6 · 2 · 2
Last achievedGorgon falls short2021
Watch forGreensand at full scale
2
openMeasuring and verifying
Checking where stored carbon dioxide goes underground, showing that none has leaked, and counting the tonnes on which taxes, permits and credits are paid.
7 · 2 · 2
Last achievedCredits without monitoring plans2020
Watch forEU-certified removals
2
openUses for captured carbon
Selling or using captured carbon dioxide: to push more oil out of old fields, to make fertilizer and drinks, and to make fuels, chemicals and building materials.
5 · 2 · 2
Last achievedOne credit for every use2025
Watch forJet fuel from CO2
2
open
Open in carbon capture
3 of 12 open deliverables
Open · Capture at the plant
Fault log for capture plants
A public record of every reported outage, slowdown and shutdown at the large capture plants that have run for years, starting with Boundary Dam 3 and Petra Nova and adding Quest and others. Each event gets its dates, the days or tonnes lost, the part that failed (for example the CO2 compressor, a heat exchanger, the absorber, the solvent, the host plant, the power supply or the buyer of the CO2), and a link to its source.
Built with what exists
SaskPower's BD3 status updates; the Petra Nova final report (OSTI 1608572); Quest's annual reports to the Alberta government; papers from Technology Centre Mongstad and the International CCS Knowledge Centre; a document-reading AI model to pull events out of PDF reports for a person to check (see the Note "Seven more flagged"); a model that answers fixed-choice questions to propose a cause code for each event, such as Gemini Decision 1 (see the Note "A thousand questions, one pass"); a spreadsheet or SQLite file.
Open · Capture from air
Test the AI-picked sorbents
Make and measure, in a university lab, a small set of metal-organic frameworks (MOFs, crystals with pores built from metal atoms and organic links) on which two computer screens for air capture disagree, to find out which screen predicts real CO2 uptake from humid air.
Built with what exists
The ODAC23 and ODAC25 data and the machine-learned models released with them in Meta's fairchem library; MOFChecker; the CoRE MOF 2025 database; the Cambridge Structural Database for published recipes; a volumetric gas sorption analyzer and a humid breakthrough column, standard equipment in university porous-materials labs.
Open · Transport
A terrain screen for pipelines
An open, fast screening tool that takes a CO2 pipeline route and a ground-elevation map and marks the low ground, such as valleys and river flats, where gas from a rupture would flow and collect, with a rough concentration estimate along each path. It is checked first against Satartia, where the screen should place the village inside the hazard zone that Denbury's 2011 model missed.
Built with what exists
USGS 3DEP elevation data; WhiteboxTools or GRASS GIS to trace downhill flow paths; ALOHA, the free air-hazard model from EPA and NOAA, which handles heavy gases but assumes flat ground, or slabx, an open Python version of the SLAB dense-gas model, for concentrations along each path; OpenFOAM for a few check runs; Python; the route maps that pipeline developers file with state utility commissions.